Shop New Products!
Narrow Results By: Category (Select One) Further Narrow Results By:
brand
Ace Roto-Mold (13)
Price
Under $20 (1) $20 - $40 (1) $80 - $100 (3) Over $100 (9)
You can find it ...
In Store Only (11) Online & In Store (2)
Size
200 gal (3) 100 gal (2) 16 (2) 1 (1) 1000 gal (1) 1050 gal (1) 1 1/2" (1) 1 1/4" (1) 1150 gal (1) 125 gal (1) 1500 gal (1) 150 gal (1) 1650 gal (1) 1700 gal (1) 175 gal (1) 2 (1) 300 gal (1) 34 (1) 350 gal (1) 35 gal (1) 405 gal (1) 450 gal (1) 535 gal (1) 625 gal (1) 65 gal (1) 8 (1)
Show More

1 - 13 of 13 Products

View:
Show me:
Sort by:
1

Storage Tanks & Accessories, Agriculture

Ace Roto-Mold - Free Standing Horizontal Leg Tank

Ace Roto-Mold - Free Standing Horizontal Leg Tank

$89.99 - $649.99

Free standing leg tanks are perfect when transportable (non DOT approved) containment is required. These tanks are equipped with molded-in legs to support the tank and band locators for easy tie downs. Tanks are manufactured from medium- or high-density polyethylene with UV inhibitors and designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and have gallon indicator marks so you always know where you stand.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - Pickup Tank

Ace Roto-Mold - Pickup Tank

$229.99 - $399.99

Pickup tanks work perfectly as applicator tanks or when transportable (non DOT approved) containment is required. These tanks are designed to fit most pickup trucks, and are manufactured from medium-density polyethylene with UV inhibitors. The tanks are designed for containment of liquids of up to 1.7 specific gravity. Tank walls are translucent for level viewing and equipped with gallon indicators so you always know where you stand.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - Vertical Dome Top Tank

Ace Roto-Mold - Vertical Dome Top Tank

$379.99 - $999.99

Vertical dome tanks are freestanding with a flat bottom for easy indoor or outdoor installation. These tanks conform to NSF/ANSI Standard 61 requirements. These Roto-Mold tanks are manufactured from medium-or high-density polyethylene with UV inhibitors for longevity. The walls of these tanks are translucent for level viewing, and are equipped with gallon indicators so you don’t have to risk running dry.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - Flat Bottom Utility Tank

Ace Roto-Mold - Flat Bottom Utility Tank

$219.99 - $349.99

Flat bottom utility tanks are perfect for a variety of different uses and can easily be used in portable or stationary applications. These tanks are manufactured from medium-density polyethylene with UV inhibitors and are designed for containment of liquids of up to 1.7 specific gravity. The tank walls are translucent for level viewing and equipped with gallon indicators so you never have to worry about running dry.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - Vertical Flat Top Tank

Ace Roto-Mold - Vertical Flat Top Tank

$209.99 - $249.99

These vertical flat top tanks are freestanding with a flat bottom for indoor and outdoor applications. They also conform to the requirements of NSF/ANSI Standard 61. These tanks are manufactured from medium-or high-density polyethylene with UV inhibitors for longevity. The walls of these tanks are translucent for level viewing, and have gallon indicator marks so you don’t risk running dry.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - Cistern Single Compartment Tank

Ace Roto-Mold - Cistern Single Compartment Tank

$1,299.99 - $1,749.99

Ace Roto-Mold cistern single compartment tanks are intended for bulk storage or collection of potable water and designed for below ground level installations. These tanks are manufactured from high-density polyethylene with U.V. inhibitors and feature a trapezoidal, deep rib design. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. The exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. Ace Roto-Mold cistern tanks are FDA-approved for potable water and are manufactured for containment of liquids up to 1.7 specific gravity.Note: Please refer to the size chart for dimensions, weights, lid sizes, fitting sizes, etc.

Ace Roto-Mold - 40 Gallon Spot Sprayer Tank w/ Legs

Ace Roto-Mold - 40 Gallon Spot Sprayer Tank w/ Legs

$89.99

An easy way to move liquids, this spot sprayer tank comes equipped with pump and equipment mount inserts. Molded-in legs support the tank while band locators and bottom inserts make securing this tank a breeze. This tank comes with a drain out sump, and is manufactured from linear low-density polyethylene with UV inhibitors. Designed for containment of liquids of up to 1.7 specific gravity, this walls of this tank are translucent for level viewing and equipped with gallon indicators so you never have to worry about running dry.

Ace Roto-Mold - Water Only Tank

Ace Roto-Mold - Water Only Tank

$239.99 - $379.99

This water only vertical tank is freestanding for indoor or outdoor stationary applications. Manufactured from FDA compliant high-density polyethylene with UV stabilizers, this tank was designed to hold up under a variety of conditions.

Ace Roto-Mold - Two Compartment Septic Tank

Ace Roto-Mold - Two Compartment Septic Tank

$1,449.99

Strong and easy to install, these two compartment septic tanks by Ace Roto-Mold are less expensive than old-fashioned, concrete septic tanks. Made out of a high-density polyethylene with UV inhibitors, these tanks still offer the quality construction and safety you demand out of your septic tank. Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Each tank carries an individual serial code and is fully documented from date of manufacture. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. The custom-molded gasket in the lid is manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a water-tight seal.Note: Please refer to the size chart for dimensions, weights, etc.

Ace Roto-Mold - Threaded Tank Adapter

Ace Roto-Mold - Threaded Tank Adapter

$8.99 - $13.99

This threaded tank adapter features a retainer ring molded into each fitting to prevent the sealing gasket from expanding or sliding out of position under compression. The bearing washer insures even compression on the gasket and promotes sealing. Made out of a durable Santoprene thermoplastic rubber, this adapter comes with fitting compression nuts that have a specially designed cross-section to prevent distortion under load.

Ace Roto-Mold - 8" Septic Tank Riser & Lid

Ace Roto-Mold - 8" Septic Tank Riser & Lid

$89.99

Using high-density polyethylene with UV inhibitors, Ace Roto-Molds 8" septic tank riser and lid features a secure lid with an 8" pipe that may be used to inspect the tank.

Ace Roto-Mold - 16" Septic Access Extension

Ace Roto-Mold - 16" Septic Access Extension

$109.99

Make maintenance easy with this 16" septic access extension. This septic tank access extension can raise the height of your cover by 16 inches, and it features a flat round boss on two sides to facilitate fitting installation or pump-mounting.

Ace Roto-Mold - 16" Threaded Vented Lid & Ring

Ace Roto-Mold - 16" Threaded Vented Lid & Ring

$29.99

Made from injection molded polypropylene with UV inhibitors, this 16" threaded vented lid and ring is designed to last.

Powered by Site Search powered by SLI Systems