Approved for use either indoors or outdoors, Allied Precision's Heated Pet Mats are constructed of durable, weather-resistant plastic with welded seams for safety and longer life. This mat includes a machine washable fleece cover. Allied Precision's unique, patented design allows air flow completely around the heating element to eliminate "hot spots" common with other plastic mats. These mats are designed to be used in dog houses, garages, kennels, or anywhere your pet needs added warmth.Small: 13x19 60WMedium: 17x24 70WLarge: 24x29 100W
These Floating De-icers will keep a stock tank completely ice-free. Thermostatic control coupled with thermal feedback protects the unit from overheating, while positioning the thermostat above the heating element ensures safety in low-water conditions. The float is completely enclosed in a rugged, plastic housing and will not sink over time.
This Allied Precision 1000 watt/120 volt floating de-icer is great for keeping both ponds and stock tanks accessible in winter to livestock or wildlife. This de-icer keeps a pond completely ice-free, providing fresh oxygen to fish. Thermostatic control and thermal feedback prevent overheating. Includes 15’ cord.
This handy Allied Precision 250 watt/120 volt bucket/utility de-icer is great for heating livestock watering buckets and birdbaths. The large, low-profile surface area runs cooler while emitting the same amount of heat as conventional de-icers, resulting in less mineral buildup and longer life. Multiple thermostats help you adjust for multiple applications.
The Allied Precision Sinking De-Icer operates at the bottom of the tank where tit is less likely to be disturbed by livestock. Thermostatic control coupled with thermal feedback protects the unit from overheating, while positioning the thermostat above the heating element ensures safety in low-water conditions. Each unit comes complete with a galvanized wire guard for use in plastic tanks. 1500 Watts, 120 Volts.
Designed to heat rather than simply de-icing, Allied Precision’s powerful 1000 Watt Bucket Heater can heat water up to over 180 degrees depending on the bucket’s volume and insulation. Featuring a stainless steel guard that protects the heating element, it comes with a 6-foot cord and rests easily inside a 5 gallon bucket.
The Allied Precision utility heater is a versatile unit made of heavy-gauge steel with an attractive baked-on enamel finish. Though not immersible, this utility heater can be used under metal buckets, fountains, or inside various enclosures. With an adjustable and replaceable thermostat, the utility heater's compact design has a wide range of uses.
This 1500 Watt De-Icer from Allied Precision easily converts between a floating, sinking, or drain-plug de-icer. It offers energy-efficient operation that keeps the entire tank free of ice without overheating the water. Recommended for100-300 gallon tanks, it features multiple thermostats that separately monitor water and heating element temperatures to provide efficient and safe operation. It has a sturdy, finned base that spreads heat across the water and allows the unit to remain cool to the touch.
These Drain Plug De-icers mount securely into the tank drain hole to keep the heating element away from livestock.The 15DP has a "butterfly" heating element and is designed to mount into the larger drain hole found on some Rubbermaid tanks.
The Tankside Heater clamps to the side of a metal stock tank. It comes with an adjustable thermostat that allows the user to set the water temperature. This unit takes the place of a de-icer by maintaining the water temperature near a set point. The thermostat is replaceable. Not for use in plastic tanks.
With a generous capacity of 16 gallons (64 quarts), this bucket is designed to accommodate multiple animals. Constructed of high-quality, resilient plastic to withstand low temperatures without cracking, the 16HB also sports strong and sturdy molded handles. Thermostatically controlled with over-temperature protection ensures that it will keep water ice-free to low temperatures.
This bucket’s flat-back design and over-sized handle allows it to hand flush against a wall. Constructed of high-quality, resilient plastic to withstand low temperatures without cracking with a strong, over-sized metal handle. Thermostatic control coupled with over-temperature protection ensures that it will keep water ice-free to low temperatures. A bottom compartment stows the cord during summer use. Large 5 Gallon (20 Quart) Capacity.
A great all-purpose extension cord, this 25-foot LockNDry Power Supply Cord from Allied Precision offers a secure water-resistant electrical connection. It has a specially designed plug that fits any standard outlet, but when mated with a LockNDry compatible power cord it pulls the plug tight against the gasket to create a water-resistant steel while preventing cord separation.
The Allied Precision Galvanized De-Icer Guard is specially designed to protect water tanks. Whether it is rubber, plastic or structural-foam tanks this is meant to prevent damage from high heat. May be used with floating, sinking or 2-in-1 De-Icers.
This 50-foot LockNDry Power Supply Cord from Allied Precision offers a great all-weather solution to your outdoor power needs. While it functions well as a general purpose cord, it really stands out from the crowd with its specially designed plug. The plug fits any standard outlet, but when mated with a LockNDry compatible power cord it pulls the plug tight against the gasket to form a water-resistant seal while preventing cord separation.
The ClickShield Cord Lock is the fast and inexpensive way to weather-proof any power cord, while also eliminating irritating and dangerous disconnects. This durable all-weather plastic shield has a unique ratchet mechanism; when you hear the 'click', you know it's securely locked. The internal gasket assures a water-resistant electrical connection.The ClickShield is great for Christmas lights or other electrical holiday yard decor, power tools, or outdoor equipment of any kind. ClickShield is the essential outdoor electrical accessory.
This 3/4” plastic thread nut from Allied Precision is a replacement for the nut on Allied’s 2002DP Drain Plug De-Icer. It comes straight from the manufacturer, so you can rest assured that it will fit just as perfect as the original. It allows you to mount the de-icer through the drain hole, which keeps the electrical cord out of the water.