This Uriah Products connector kit comes with both the vehicle and trailer end connectors necessary to activate your circuit. They’re constructed out of durable die cast zinc, and they can be used to build a system from scratch or to replace damaged connectors in your existing system. It comes with all the hardware you need to install, including vehicle brackets and splice connectors.
This Uriah Products momentary switch has a simple push-button operation. It has a capacity of 15 amps in 12-volt DC systems, and it features sturdy all-metal construction that ensures it will last you for years to come.
Uriah Products offers this 14-gauge 7-wire trailer cable that should last you through a number of projects. The color-coded wires are coated in durable, weatherproof PVC to last for years to come. While this cable was designed for use as trailer wiring, you can also use it in any project that calls for 6 conductor, low-voltage cable in 14 AWG.This product is sold by the foot so you can purchase just the right amount!
This package of Uriah Products ring terminals contains 12 terminals that have 1/4” studs. They accommodate wires ranging from 12-10 AWG, and they’re insulated with yellow PVC that’s durable and makes them easy to spot.
Blazer International’s 24 diodes LED Emergency Magnetic Light is visible for over one mile and has a dual function; on or flash mode. It includes a bright white work light on the side and is rubber gasket sealed & water resistant. It has 2 heavy duty magnets for easy mounting. Battery operated (4 AA batteries not included).
This Uriah Products flat 4-pole wire connector kit comes with both trailer- and vehicle-end connections. The trailer end includes a 4-pole flat male connector and 12” of wiring, while the vehicle end includes a 4-pole flat female connector and 48” of wires. All of the wiring is insulated with durable PVC.
These Uriah Products butt splices (sold in packs of 15) are designed for use on 14- to 16- gauge wires. They’re insulated with blue PVC, and they’re meant for use in 12-volt DC systems.
These tab disconnects from Uriah Products come in a pack of 18. They’re male disconnects that work in 12-volt DC systems and accommodate wires ranging from 22-18 AWG. They have 1/4” tabs and are insulated in durable, highly-visible red PVC.
This Uriah Products cab marker light has a distinctive teardrop shape and comes in an amber color. It comes with a mounting frame that also acts as a ground and includes all the necessary hardware for installation.
This Uriah Products contains 25 feet of trailer 4-wire trailer wire. It’s bonded for durability and weatherproofing, and the four 16-gauge wires are color coded. It’s designed for use as trailer wire, but it can also be used for any application calling for 16-gauge low voltage wire.
These tab disconnects come in packs of 18 from Uriah Products. They’re male tabs that accommodate wires ranging from 12-10 AWG. For use on 12-volt DC circuits, they have 1/4” studs that are coated in yellow PVC that provides good durability and visibility.
These Uriah Products heat-shrinking spade terminals have #8 studs (0.164”/4.166 mm) and accommodate 22- to 18-gauge wires. They include red nylon insulation that shrinks under heat to create a watertight seal, and they also feature a double-crimp design that provides greater strain relief and pull strength than regular terminals. This package includes ten terminals.
This round halogen tractor light from Uriah Products has a 4” diameter and a recessed lens. It houses a powerful 55-watt halogen bulb, and the clear lens has a flood pattern that provides light to a large area. It includes a rubber housing and stud mounts, and it comes with all the necessary hardware for installation.
This Uriah Products kit comes with a handy crimping tool for working on your trailer’s wiring. The crimping tool comes with cushioned handles, making it easy to use even on larger projects. The kit also includes a variety of butt splices, ring terminals, spade terminals, and disconnects that work on wires ranging from 10- to 22-gauge.
Fuses from Uriah Products make reliable replacements in whatever application of yours needs a new fuse. This fuse holder comes with a 20-amp fuse that works on 12-volt DC currents.
The Uriah Products complete 4-pole trailer wiring kit should give you everything you need to get started wiring the lights on your trailer. It includes 20 feet of wire that’s split for the left and right trailer lights as well as 36” of vehicle wire. It also includes easy-to-use splice connectors, and all the wire is insulated with PVC for durability.