Packed for everything a workshop needs, this 20V MAX Compact 9-piece Combo Kit DCK940D2 is a complete set of hardworking tools. This set contains: a DCD771 Compact ½” Drill, DCS381 20V Max reciprocating saw, DCF885 20V MAX 1/4" impact driver, DCS393 20V Max circular saw, DCL040 20V MAX LED work light, DCS355 20V MAX XR Oscillating Multi-Tool, DCR006 12V/20V MAX Cordless Lithium-Ion Bluetooth Speaker, DCG412B Cordless 20V Cut Off Grinder, DCD740 20V MAX lithium ion 3/8-inch right angle drill/driver, and a (2) 20V Max lithium ion 2.0 Ah battery packs and fast charger. There is no project too large or small for this handy kit to tackle.
Keep powering through your project with this 2 pack of 20V MAX Premium XR Lithium Batteries (DCB204-2). These lightweight batteries have a longer run time than standard 20V MAX battery packs which allows you to get more done without worrying about changing or charging your battery.
You want it all! And you need it. Well with DEWALT and murdochs.com you can have it and then some, and at an amazing price - delivered to your door! Check it out. This 20V MAX* Li-Ion 5-Tool Combo Kit is Complete: you get the Hammerdrill / Drill/Driver, the Recip Saw, the 6 ½” Circular Saw with Carbide Blade, the ¼” Impact Driver with 3-LED light system, and a 20V Worklight. What can’t you do with this Kit? All you need is lumber and screws!! Plus, you get two of the top-of-the-line 20V MAX* Li-Ion Batteries with 3.0Ah, giving you up to 57% more speed and up to 35% more run time, as well as a Charger and a Contractor Bag. Now that’s a lot of Combo!! * DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention.* DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.* DCS393 20V MAX* circular saw with 6-1/2" carbide blade can cut 2x4's at a 45° angle in a single pass.* DCL040 20V MAX* LED work light delivers 110 lumens of light output.
This DEWALT 20V MAX 1/4” Cordless Impact Driver has a compact 5.5” design that allows you to use it just about anywhere. It has trigger-activated LED lights to illuminate dark, cramped work areas, and the lightweight 2.8-pound design allows you to comfortably use it for hours at a time. It features a powerful DEWALT brushless motor that can produce up to 3200 IPM and 117 ft. lbs. of torque. This edition of the driver ships without batteries and chargers, allowing you to economically add to your collection of tools while using your existing DEWALT 20V MAX battery packs.
Power through your project with this 20V MAX Premium XR Lithium Battery (DCB204). These lightweight batteries have a longer run time than standard 20V MAX battery packs which allows you to get more done without worrying about changing or charging your battery.
There’s been a paradigm shift. The next generation of cordless tools is here. Leading the way is the DCD780C2, the 20V MAX* Li-Ion Compact Drill Driver Kit from DEWALT. Remarkably compact and lightweight, this Drill/Driver features a heavy-duty ratcheting ½”inch chuck for optimal gripping on bits and accessories. The 20V Li-ion Batteries offer much longer run times, charge quicker and have longer lives than traditional NiCd batteries, and they weigh so much less! The DCD780C2 also offers a dual-speed transmission, allowing for operating speed of 0-600 rpm and 0-2000 rpm for a wide range of fastening and drilling applications. It’s cherished by the contractor, applauded by the homeowner, and envied by the competition. Get yours today and step into the future.* Compact, lightweight design fits into tight areas* High speed transmission delivers 2 speeds (0-600 & 0-2,000 rpm) for a range of fastening and drilling applications* Ergonomic handle delivers comfort and control* Metal gears in transmission* Upgraded chuck* Premium Clutch* Heavy-duty 1/2" ratcheting chuck provides superior bit gripping strength.* Increase run time performance
DEWALT’s 20V MAX* Lithium Ion Reciprocating Saw is ideal for many cutting applications. It features a 4-position Blade Clamp that allows for flush cutting and increased positional versatility with tool free blade changes. 1-1/8" stroke length delivers a fast cutting speed. Variable speed trigger with 0-3000 spm provides increased blade control and faster cut speeds. Pivoting adjustable shoe extends blade life and allows depth of cut control. Rubber over molded comfort grip delivers optimal comfort and control. Double oil sealed shaft resists contamination and increases durability.DCS380P1 Includes:* DCS380 Reciprocating saw* (1) DCB205: 20V MAX* XR Premium Li-Ion Battery (5.0 Ah)* Fast charger* Kit box
Power through any task with DEWALT’s DCF889 – 20v MAX XR Brushless High Torque ½” Impact Wrench. With up to 700 ft lbs of max torque and 1200 ft-lbs of max breakaway torque, this tool has enough power to make any chore easy. Multi-speed functionality puts the control in your hands for use on a variety of different projects. An added LED light increases visibility in dark spaces, so you can be confident in the work you are doing, every time.
20V MAX* Compact XR Lithium Ion Battery Pack DCB203* Compact XR Lithium Ion pack provides up to 33% longer run-time than standard 20V MAX* battery packs.* 3-LED Fuel Gauge System allows immediate feedback on state of charge.* No memory and virtually no self-discharge for maximum productivity and less downtime.* Lightweight design and quick 35 minute charge time.
This 20V battery from DEWALT has a massive 5.0Ah capacity to deliver outstanding run time that can hold up to your most demanding jobs. It also has a 3-LED gauge that allows you to immediately read the current state of your charge, and there’s no memory and virtually no self-discharge for maximum productivity and less downtime. Finally, despite its hefty capacity, it weighs a mere 1.4 pounds, which reduces your fatigue, allowing for more comfortable days on the job.
* DCS310 12V MAX* pivot recip saw utilizes 3-position pivot handle for making difficult cuts in confined spaces.* DCD710 12V MAX* 3/8" drill/driver features two speed transmission (0-400 / 0-1,500)* DCF815 12V MAX* 1/4" impact driver features 3 LED lights to provide visibility without shadows* DCL510 LED worklight delivers 510 lumens and hands free usage.
20V MAX* Lithium Ion Grease Gun Kit DCGG571M1* Powerful motor delivers 10,000 max psi to power through clogged grease fittings* High-volume pump pushes up to 5.0 oz/min high-flow applications* Up to 16 cartridges per charge with a single DEWALT 20V MAX Battery (4.0 Ah)* Variable speed trigger offers precise control of the grease flow* 42" extra-long and flexible hose designed for reaching hard to access grease fittings* Bright LED light assists in locating hard to see grease fittings in low-light situations* Innovative pump filter screen prevents dirt and contamination from clogging the pump mechanism* Integrated no-mar foot design allows operators to rest the tool on flat surfaces* Air-bleeder valve assists in pump priming after cartridge changesDCGG571M1 Kit Includes:* DCB204: 20V MAX XR Premium Li-Ion Battery (4.0 Ah)* Fast charger* Shoulder strap* Kit box
This one’s Important. This one makes a difference. This one’s a Combo you shouldn’t be without. It brings you nicely into the land of the 20V MAX* Li-Ion tools from DEWALT and raises your productivity game to the MAX. It comes with the incredible DCD780, the 20V MAX* Compact Drill/Driver and the DCF885, DEWALT’s most impressive 20V MAX* Impact Driver. The Compact Drill/Driver has a ½” chuck and 2-Speed options for more torque or more speed, according to your project demands. The 20V MAX* Impact Driver will quite possibly change your life as it offers unmatched fastener-driving capabilities with its 3,200 impacts-per-minute and 1,400 in-lbs of torque. It’s lightweight and extremely compact, making it super portable on your tool belt and able to go to work in the tightest of spots. And if it’s dark where you need to work, don’t worry, this Impact Driver comes equipped with a 3-LED light system that illuminates your work surface without shadows. * DCD780 20V MAX* 1/2" drill/driver features two speed transmission (0-600 / 0-2,000).* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.
The DCF883B has power and performance you need in an impact wrench. It’s perfect for the garage, farm, and shop and works with any DEWALT 20V Max Lithium Ion Battery. With three LED lights you can always see where you are working.* Compact (5.70" front to back), lightweight (3.4 lbs) design fits into tight areas* Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows* Hog ring anvil to easily change sockets* Textured anti-slip comfort grip provides maximum comfort and control
20V MAX* XR Lithium Ion Combo Kit DCK281D2* DEWALT brushless motor delivers up to 57% more run time over brushed.* XR™ Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs.* DCD790 20V MAX* 1/2" drill/driver compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas.* DCF886 20V MAX* 1/4" impact driver compact (5.6" front to back) design fits into tight areas.* Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.
DEWALT’s 20V MAX* Lithium Ion Grinder Tool has a 7,000 RPM motor that provides high-power for cutting and grinding applications. A Quick-Change™ Wheel Release allows for tool free wheel changes without the need for a wrench. The 2-position side handle gives you better control, comfort and versatility while grinding. You’ll also find that the 2-finger trigger switch with a lock-off button allows convenient activation and easier gripping.DPG20 Kit Includes:* DCG412 Grinder* (2) DCB205: 20V MAX* XR Premium Li-Ion Battery (5.0 Ah)* Fast charger* Spanner wrench* 5" (125mm) Type 27 (grinding) guard* 2-Position side handle* Contractor Bag
The 20V MAX Compact Reciprocating Saw Kit (DCS387P1) is both compact and lightweight, allowing it to fit between studs and allowing you to make cuts in confined spaces. A 4-position blade clamp allows for tool free blade changes, while the bright LED light illuminates dark work areas. The pivoting shoe provides versatility while cutting and the 1-1/8” stroke length means a fast cutting speed. The variable speed trigger provides blade control for precise cuts every time.This kit includes: DCS387 20V MAX Reciprocating saw, 1- DCB205 5.0AH battery, charger, and kit bag.
This handy DEWALT battery adapter allows you to use 20V MAX lithium ion batteries in most of your 18V DEWALT tools. It allows you to ditch your older, less effective batteries without having to replace them with both 18V and 20V models. It’s also useful because 20V MAX batteries offer a wide range of capacities, giving you more flexibility to choose the best one for your task. Note that the adapter will not fit in 18V chargers, and it’s not for use with DEWALT premium batteries in 18V compact drills.
This DEWALT 20V MAX 7-1/4” Cordless Sliding Miter Saw offers the convenience of cordless operation so that there’s no need to lug generators or extension cords to your worksite. It’s capable of delivering around 183 cuts of 2x4 pine or 275 cuts of 3-1/4” pine baseboard on a single battery charge. It features an integrated XPS cross cut positioning system that delivers adjustment-free cut line indication for better accuracy. It has a 3-1/2” maximum vertical and 3-5/8” crown nested cup capacity, and it has a single left bevel which ranges from -3 degrees to 48 degrees left. At 31.6 pounds, it’s fairly easy to store and transport, and this kit comes with everything you need to get started, including a 20V MAX battery pack (DCB204), a charger (DCB112), a carbide blade, a blade wrench, and a material clamp.
The powerful 5,250 rpm motor on this 20V MAX* Lithium Ion Circular Saw delivers power and speed to make the most demanding cuts with ease. It has a 0°-50° bevel capacity that allows for aggressive bevel cuts for a multitude of applications. The high strength and lightweight magnesium shoe provides jobsite durability for long-term cut accuracy. It comes with a 6-1/2" carbide tipped blade for cutting 2x the material at 90° and 45° angles.DXRG53037 Kit Includes:* DCS391 6-1/2" Circular saw* (1) DCB205: 20V MAX* XR Premium Li-Ion Battery (5.0 Ah)* Fast charger* 6-1/2" Carbide-tipped blade* Kit box
20V MAX* Lithium Ion 1/2" Impact Wrench (Tool Only) DCF889B* 400 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications* Ergonomic handle provides user superior comfort and control* Variable speed trigger with electric brake provides user improved control* LED light provides user greater visibility when working in dark environments* Durable magnesium gear case and all metal transmission for extended durability
Right Angle = Right Tool. When you have got to get in there and get it done, you have to put down that screw gun and go for the DCD740C1, DEWALT’s 20V MAX* Li-Ion 3/8” Right Angle Drill/Driver Kit. With its compact tool length of a mere 4” front to back, you will thank this tool for getting you out of so many jams. The convenient, comfortable paddle style, multi-grip trigger lets you operate in a variety of ways. Even in close quarters and with variable speeds of 0-650 rpm & 0-2000 rpm, you can bore holes for conduit or drive screws with ease. This Kit includes a 20V MAX* Li-Ion (1.5 Ah) Battery, a 30-Minute Fast Charger, plus a Kitbox, belt hook, and a 2” Phillips-tip bit.Right On!* Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications.* Compact front to back length (4.0") allowing users to fit into hard to reach spaces.* Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger.* 3/8" Ratcheting Chuck with Deep Hex Pocket allows 2" (50 mm) hex bit to be fully inserted for getting into tight spaces..
Time to Remodel! Give your tool kit a makeover and update to the 20V MAX* Li-Ion Cordless System from DEWALT. A great place to start is over there in your carpentry area, so we recommend you pick up the DCK491L2. It’s a 4-Tool Combo Kit that will spruce things up. First, you get the Hammerdrill / Drill/Driver for all your drilling and driving needs in any material, conveniently located all in one tool. Next, it offers The Recip Saw with a 4-Position Blade Clamp that lets you flush-cut with ease, even in tight situations – great for demolition and perfect for pipe cutting, too. Then, they include the 6 ½” Circular Saw with a Carbide Tip Blade. It’s built for the contractor who needs serious run times and plenty of power for rip-cuts, cross-cuts, and even plunge cuts – and it does it all day long. They also give you an LED Worklight for when the project goes late or you just feel like exploring that cave. The Kit comes complete with a Contractor Bag, a Charger, and two 20V MAX* Lithium Ion 3.0Ah Batteries with up to 35% More Run time per charge than the competition, while powering the tools that operate up to 57% Faster! So, put those rebuilding skills to work and purchase your Combo Kit today!* DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention.* DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.* DCS393 20V MAX* circular saw with 6-1/2" carbide blade can cut 2x4's at a 45° angle in a single pass.* DCL040 20V MAX* LED work light delivers 110 lumens of light output.