The DEWALT DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.* DEWALT brushless motor delivers up to 57% more run-time over brushed* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas* DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas* DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces* DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
Eliminate your downtime with DEWALT's DCD777C2 20V MAX* Compact Brushless Drill / Driver Kit. With a brushless motor that delivers more run time over other brushed models ,two 20V MAX lithium-ion battery packs, and a charger, you'll be able to enjoy the convenience of wireless operation without the downtime. It has a compact (7.52" front to back) lightweight design that will keep fatigue to a minimum. It also features a metal 1/2" ratcheting chuck for superior bit gripping strength and a bright LED light to provide lighting in dark or confined spaces.
The DEWALT DWS779 slide compound miter saw is ideal for most cutting applications including crown molding up to 7-1/2 in. This miter saw is designed with a powerful 15 Amp, 3800 RPM motor that delivers extended power and durability. The exclusive back fence design cuts up to 2 x 14 dimensional lumbers at 90 Degree and 2 x 12 at 45 Degree.* Delivers ample power with 15 amp motor and 3800 RPM* Cuts 2x14 dimensional lumber at 90 degrees and 2x12 at 45 degrees* Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable and compact saw* Tall sliding fences support crown molding up to 7-1/2 in. nested and base molding up to 6-3/4 in. vertically against the fence while easily sliding out of the way for bevel cuts* Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy* Miters 60 degree to the right and 50 degree to the left providing increased capacity* Precise miter system and machined base fence support optimize durability and cutting accuracy* Compact, lightweight design (56 lbs.) allows for easy transport and storage* Cam lock miter handle with detent override delivers quick and accurate miter angles
DEWALT's 20V MAX Compact Brushless Drill/Driver and Impact Kit DCK277C2 features:* DEWALT brushless motor delivers up to 57% more run time over brushed* Compact (5.4" front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas* Compact (7.52" front to back), lightweight Drill/Driver design fits into tight areas* Ergonomic comfort grip handle provides ideal balance and tool control* LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces* Impact driver's one-handed loading 1/4" hex chuck accepts 1" bit tipsIncludes:* (1) DCD777 20V MAX* Compact Brushless Drill/Driver* (1) DCF787 20V MAX* Compact Brushless 1/4" Impact Driver* (2) 20V MAX* Li-Ion Battery Packs* (1) Charger* (1) Kit Bag
The DCK694P2 20V MAX* XR 6-Tool Combo Kit features DEWALT's DCD996 Premium Hammerdrill/Driver with 3-speed transmission and their DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR Circular Saw features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX* XR compact Reciprocating saw features a compact and lightweight design to make your jobs easier. The DCS355 20V MAX* XR Oscillating Multi-Tool has a powerful brushless motor providing up to 75% more run time over a similar brushed tool. The DCL040 is a bright flashlight that illuminates your work area with LED output of 110 lumens.
An essential tool for home craftsmen and woodworking enthusiasts, this DEWALT table saw with rolling stand may be used for both wide and narrow rip cuts, making it great for working on cabinets, floors, decks, and trim, to name just a few applications. The rack and pinion telescoping fence system lets you make fast, accurate adjustments, and the 15 AMP motor effortlessly rips through hardwoods.The on-board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick, and cord wrap when not in use. Keep clean-up easy with the dust collection port that connects to any standard vacuum.
The inconvenience of poorly lit jobsites and the hassles of extra-long extension cords are in the past with DEWALT's 20V MAX Bluetooth LED Large Area Light. Whether using it as a cordless light or charger, it helps to illuminate work areas with a maximum of 7,000 lumens. With AC/DC capability, the light runs off any DEWALT 20V MAX battery and can also charge DEWALT slide pack batteries when plugged into AC power. Batteries are protected via a door lock option, providing security with versatility. The light features instant on/off with no warm-up, dimming as low as 500 lumens, right/left light head and is stackable with a wheel option for convenient storage. Users can connect multiple Large Area Lights for added illumination or to power a corded tool. The 20V MAX Bluetooth LED Large Area Light (DCL070) works in conjunction with the expanded DEWALT Tool Connect App allowing it to be controlled from a users smartphone or tablet. In addition to the convenience of the Tool Connect app, the light can be programmed to turn on or off at scheduled times automatically.
Ditch the hassle of storing and mixing gasoline for your trimmers, but keep the power and dependability you know DEWALT for with their 20V MAX® Lithium Ion XR Brushless 13” String Trimmer. It runs off DEWALT’s 20V MAX® line of batteries, and it comes with everything you need to run it out of the box after a quick charge. It’s packed with many of the features you expect from DEWALT, such as a variable speed control trigger that allows you to easily control your cutting power, a 13” cut swatch that helps you get jobs done efficiently,and a lightweight, 8.5 pound design that minimizes user fatigue.
Get Choppin’! Here’s a tool that’ll you’ll only have to buy once: The D28715 14” Chop Saw. Ranchers, welders, fabricators and machinists agree: DEWALT is the brand to have in your shop. It features an industrial grade 15 amp, 5.5 HP motor and can handle up to 5” dia. round material and 4 ½” x 6” rectangular material held securely in its Quick-Lock vise. Or you can set up for angle cuts with DEWALT’s exclusive, tool-free, Quick-Fence system. Swapping out blades is a snap on this beauty as it comes with DEWALT’s Quick-Change™ Blade Changing System as well, leading to more efficiency and no hunting for wrenches. Its heavy-duty compression springs mean smoother operation and substantially longer wear, as compared to traditional coil springs. You’ll feel the difference the first time you use it and you’ll wonder what took you so long to pick one up. Mount it securely to your work bench or transport it easily to the jobsite and get to work Chop-Chop!* Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability.* QUIK-CHANGE™ Blade Change System increases productivity by providing the user the ability to change wheels without a wrench.* Exclusive QUIK-FENCE™ tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a wrench.* Quick-Lock Vise allows for fast clamping on different size materials to increase productivity.* Soft start extends gear and motor life by reducing start up torque.* Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity.* Extra wide solid steel base provides increased stability when cutting longer material. The four pre-drilled holes in the base allow easy bolt down to any work bench.* The solid steel base also allows user to weld jigs or stops directly to the base.* Heavy-duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain.* Heavy-duty compression spring provides smooth movement and greater durability than torsion springs.* Spindle Lock allows user to make wheel changes quickly and easily, saving time and money.
Have the DEWALT Miter Saw but missing the stand?! This is for you! This DEWALT Rolling Miter Saw Stand DWX726 has all of the features you’re looking for in a miter saw stand.* Wide adjustable infeed and outfeed roller work supports provide up to 8' of material support* Easily adjustable mounting rails adapt to nearly any miter saw or portable thickness planer* Wide rubber grip wheels provide easy jobsite mobility* Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up* Durable tubular steel construction allows for a 300lb maximum weight capacity* Compact vertical storage option maximizes workplace efficiency and ease of transport* Straightforward one time assembly minimizes down time* Extended Tool Width: 98"* Extended Tool Height: 32.5"* Folded Tool Height: 59.5"* Folded Tool Width: 17"DWX726 Includes:* Rolling Miter Saw Stand* Miter Saw is not included
DEWALT's 60V MAX Handheld Blower powers through debris at 129 MPH. It features a variable speed trigger and speed lock for total power control, and its lightweight and ergonomic design maximizes control and minimizes stress on your arms. It has a 60V MAX FLEXVOLT battery that powers 60V MAX tools or it can be backwards compatible to work with 20V MAX tools.
This one’s Important. This one makes a difference. This one’s a Combo you shouldn’t be without. It brings you nicely into the land of the 20V MAX* Li-Ion tools from DEWALT and raises your productivity game to the MAX. It comes with the incredible DCD780, the 20V MAX* Compact Drill/Driver and the DCF885, DEWALT’s most impressive 20V MAX* Impact Driver. The Compact Drill/Driver has a ½” chuck and 2-Speed options for more torque or more speed, according to your project demands. The 20V MAX* Impact Driver will quite possibly change your life as it offers unmatched fastener-driving capabilities with its 3,200 impacts-per-minute and 1,400 in-lbs of torque. It’s lightweight and extremely compact, making it super portable on your tool belt and able to go to work in the tightest of spots. And if it’s dark where you need to work, don’t worry, this Impact Driver comes equipped with a 3-LED light system that illuminates your work surface without shadows. * DCD780 20V MAX* 1/2" drill/driver features two speed transmission (0-600 / 0-2,000).* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.
DEWALT's 20V MAX LED Hand Held Worklight DCL044 features a kick stand, belthook, and has a powerful magnet for hands free use in multiple placements.Note: Battery and charger sold seperately.
DEWALT's DWE6411K 1/4 Sheet Palm Sander Kit has a 2.3 am motor that delivers 14,000 OPM. The separate counterweight reduces vibration and, along with the rubber overmold grip, provides comfortable sanding. A shorter design allows you to get closer to the work surface and the one-handed locking dust bag attaches securely to the sander to aid in dust collection or you can attach the sander directly to the DWV010 or DWV012 dust collectors. The new paper clamp holds sandpaper securely during sanding.
DEWALT's DCN650 15 Gauge Angled Finish Nailer drives 15 Gauge angled finish nails from 1-1/4" to 2-1/2" which makes it ideal for fastening crown molding, casing, baseboards, and hardwood floor installation. With its brushless motor powered by a DEWALT 20V MAX* Lithium-Ion battery, the DCN650 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
This DEWALT Hammerdrill and Impact Driver Combo kit DCK299P2 features a DCD996 20V MAX XR 3-speed ½” hammerdrill that has 3-speed and was built for high performance (0-2250rpm), and features an all-metal transmission to optimize tool-to-task for fast application speeds and improved runtime. This tool can also be used for fast drilling in masonry materials while maintaining a compact size and lightweight design, measuring 8.4” front-to-back length and weighs 4.7 lbs, to fit into tight areas.The DCF887 20V MAX XR ¼” impact driver provides 1825 in-lbs if max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. This tool also features compact size and lightweight design, measuring 5.3” front-to-back length and weighing 3.4lbs.
Invest in a wet-dry shop-vac that shines in a variety of situations with the DEWALT DCV581H 18/20V MAX Cordless/Corded Wet-Dry Vacuum. It functions either connected by cord to an AC outlet or cordlessly with either an 18V or 20V MAX battery (not included). This vacuum's convenience doesn't come at the cost of performance, though. The filter is HEPA rated to 99.97% efficiency, it cleans easily with water, and the 2-gallon tank capacity is enough for bigger jobs like emptying a toilet or a clogged pipe. Whether you're keeping it in the shop or taking it on the go, DEWALT's DCV581H delivers the performance you need.
Serious about wood? So is the DW735X, the total performance Thickness Planer from DEWALT. It’s built for the professional woodworker who needs the ability to plane larger pieces cleaner, faster, and truer. The powerful 15.0 Amp Motor turns 20,000 RPM, equating to 10,000 RPM at the Cutter-Head, while the Two-Speed options let you choose between 96 and 179 cuts-per-minute according to your project and wood type, for optimal performance and finish results. The integrated chip-ejection vacuum sucks chips and dust away from the knives and out of the machine, to ensure the cleanest cuts on every cycle. You can also achieve complete consistency with the DW735X’s material removal gauge and extra-large thickness scale, which is crucial when it comes to large runs and multiple pieces. Do you like serious savings too? How about customer satisfaction? Well, you came to the right place: Murdoch’s delivers the deals, the goods, and brings customer service right to your door* Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease.* Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier.* Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.* Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.* 19-3/4" cast aluminum base is 2X more rigid than a standard 10" base and folding tables.* Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user.* Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass.* Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease.* Includes infeed and outfeed tables and an extra set of knives.
The DCB606-2 20V/60V MAX Battery pack changes voltage when you change tools, powering a line of powerful 60V MAX tools, 120V MAX tools, and backwards compatible to existing 20V MAX tools and chargers. The battery pack is smart enough to know when to provide runtime for 20V MAX tools (6.0Ah) and power in the new 60V MAX and 120V MAX tools.
Looking for the Best Miter Saw Ever Made? You just found it. It doesn’t get any better than the DWS780. It’s strong, innovative, and offers incredible material size capacity, not only because it’s a 12”, but also because IT SLIDES! This baby handles up to 16” baseboard or lumber laying flat, and miters up to 60° on the right and 50° on the left for unbelievable versatility. Since it’s a double-beveller, you can work with more efficiency and ease as you can approach bevel cuts from both directions, letting you handle up to 13 ¾” crown molding laying flat! It’s a fantastic addition to the serious wood shop, and its portability makes it a favorite among carpenters who need maximum capacity on the jobsite. If you’re ready to go big, order yours today – Murdoch’s will be happy to ship it to you! Don’t forget to pick up a heavy-duty miter saw stand (DWX723) too… * Integrated XPS cross cut positioning system provides adjustment free cut line indication for better accuracy and visibility.* Powerful 15 Amp, 3,800 rpm motor delivers extended power and durability.* Super efficient dust collection system captures over 75% of dust generated.* Tall sliding fences support crown molding up to 7-1/2" nested and base molding up to 6-3/4" vertically against the fence while easily sliding out of the way for bevel cuts.* Exclusive Back Fence Design cuts up to 2x16 dimensional lumber at 90° and 2x12 at 45°.* Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy.* Miters 60° to the right and 50° to the left providing increased capacity.* Oversized bevel scale makes bevel angle adjustments accurate and easy.* Compact, lightweight design (56 lbs.) allows for easy transport and storage.* Cam lock miter handle with detent override deliver quick and accurate miter angles.
Packed for everything a workshop needs, this 20V MAX Compact 9-piece Combo Kit DCK940D2 is a complete set of hardworking tools. This set contains: a DCD771 Compact ½” Drill, DCS381 20V Max reciprocating saw, DCF885 20V MAX 1/4" impact driver, DCS393 20V Max circular saw, DCL040 20V MAX LED work light, DCS355 20V MAX XR Oscillating Multi-Tool, DCR006 12V/20V MAX Cordless Lithium-Ion Bluetooth Speaker, DCG412B Cordless 20V Cut Off Grinder, DCD740 20V MAX lithium ion 3/8-inch right angle drill/driver, and a (2) 20V Max lithium ion 2.0 Ah battery packs and fast charger. There is no project too large or small for this handy kit to tackle.
The DCK594P2 20V MAX* XR Lithium Ion 5-Tool Combo Kit features DEWALT's DCD996 Premium Hammerdrill/Driver with 3-speed transmission and their DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR Circular Saw, features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX* XR Compact Reciprocating Saw features a compact and lightweight design to help make your jobs easier. The DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.
Ready to go pro? Ready to get your miter saw off the floor? Tired of trying to stack just the right amount of scrap wood on top of that garbage can to support your longer boards while you’re cutting? We thought so. So here’s what you should do: order up the DWX723, the Universal Heavy-Duty Miter Saw Stand from DEWALT. No matter what brand of miter saw you own, it can handle it. It’s smart, sturdy, and totally portable. The 5 ½’ beam extends out to support up to 16’ long pieces, while the stops/supports are easily positioned along it for material support and/or repetitive cuts at the same lengths. Let Murdoch’s get it to your house and you can take it from there!* Universal design works with all brands of miter saws.* Lightweight aluminum construction (35 lbs.) allows for easy transport to and from the jobsite.* 5-1/2' beam extends to support up to 16 ft. of material and up to 500 lbs.* Legs provide superior support and fold for easy storage.* Leg Lock Levers allow for fast and easy set up.* Miter saw mounting brackets (included) allow easy and secure mounting of miter saw to stand.* Work stops/supports can be repositioned quickly anywhere along the rail.* Non-marring feet on tool mount will not scratch material.* Extension Lock Levers allow for fast and secure tightening of extensions.* Miter saw not included.
DEWALT’s 20V MAX Brushless Blower lets you expand your collection of 20V MAX tools while saving some money and using the batteries you already own. Delivering cordless electric convenience without sacrificing power, it pushes up to 400 CFM of air volume at 90 MPH to clear most household debris. The brushless motor offers excellent efficiency and runtime, and it also features an innovative axial fan design to push more air. Its low noise output (just 61 dB) and lightweight design makes it a breeze to operate, even on longer jobs.