No more strapping your chainsaw to your rack—this Kolpin® Saw Press® II universal fit bracket makes it safe and easy to transport your chainsaw off-road. Designed to fit virtually any ATV rack or UTV roll bar, the Saw Press® II will accommodate any brand of chainsaw with up to a 20” bar. The hinged design and rubber pads ensure quick removal and a snug, cushioned fit to protect against vibration. This bracket adjusts up to 45°, freeing up rack or rail space for your other gear.
Enjoy a safer off-road ride when you install this Kolpin® UTV rear mirror. The convex mirror provides a wide viewing range and image stabilization, and is easy to install. The ball socket joint allows for unlimited viewing angles, and the shatter-proof tempered glass means you don’t have to worry when riding through loose or rocky terrain.
Kolpin's ATV Fuel Pack is a great addition to round out your travel gear. Includes one self-venting, child-proof spout for dispensing fuel, and one blind cap for transporting fuel. The Fuel Pack is made of puncture resistant, crush proof, high-density polyethylene NanoTechnology and features molded handles for easy transportation and filling.Kolpin's ATV Fuel Packs securely mount flat on any ATV rack with four (4) heavy-duty 1" wide Velcro attachments - allowing you to stack additional gear on top or mount the packs upright with the separate purchase of two (#89475) Kolpin ATV Brackets
Enjoy the outdoors with peace of mind, knowing your firearms and other tools are protected with the Kolpin® Rhino Grips XL, a double-grip carrying system for your ATV or UTV. The fully adjustable grips provide superior support to resist vibration and jostling on the roughest terrain. Rhino Grips tilt 0° to 180° in 45° increments to maximize storage space in your vehicle, and the Kwik clip design offers on/off rotational for adjustment in the field.
When off-roading, you need to keep your firearms stored safely but within easy reach, and this convenient Kolpin® UTV overhead gun carrier does just that. The adjustable length of 20-1/2” to 28-1/2” will fit inside the frame of most UTV models, while the rubber coated ends protect the frame from scratches. Assembling this carrier does not require any tools, and the easy on/off design makes preparing for your ride that much easier.
Be self-sufficient with this Kolpin® ATV flat pack, complete with the appropriate tools and materials to fix up to ten flat tires, all in one compact, convenient kit. Includes rasp, needle, rubber cement, repair material, support bar, pump, 44" hose length, and instructions. Weighing in at only 1.2 lbs, there's no excuse to not take this kit along for the ride, so you'll be prepared when disaster strikes.
The most popular Gun Boot® case for the past decade, the Kolpin® Gun Boot® IV is the perfect firearm storage solution for the hardcore power sportsman. With ample room for shotguns up to 51” and 50mm scopes, the Gun Boot® IV includes a removable Impact™ liner that provides shock-absorbing protection over even the bumpiest terrain. The ergonomic handle and molded sling attachment points ensure effortless portability. From the start of the season to closing day, the Gun Boot® IV provides ATV and UTV users with a hassle-free and reliable means of carrying your firearm wherever you need to go.
Durable and cost-efficient, this Kolpin® UTV side mirror set includes two high impact, shatterproof mirrors for the passenger and driver sides of your vehicle. The convex mirror provides a wide viewing range and image stabilization, and the ball socket joints allow for unlimited viewing angles.
Protect your firearm and optics on the trail with this Kolpin® Gun Boot® 4.3 universal bracket gun case. With plenty of room for 50mm scopes and shotguns up to 51” with or without slings, this case includes the Gun Boot® IV case convenience and the Gun Boot® III case type mount. The ergonomic handle and molded attachment points make it easy to carry this case by hand or with a sling.
Store your shotgun or scoped rifle in your UTV or truck with this heavy-duty Kolpin® UTV gun rack. The over-molded butt section securely holds the stock of your firearm in place, and the over-molded v-blocks have rugged rubber straps to support the barrel and body. Mountable on the flat floor or bed of your UTV or truck, this gun rack will angle 45° in either direction to maximize gear space in your vehicle. Specific adapter plates are available for humped floors (sold separately).
Great for carrying guns, bows, fishing poles, shovels, and a variety of other large tools, this Kolpin® ratcheting Rhino Grip® mounts on your ATV or UTV for safe, reliable transportation when off-roading in the roughest terrain. The cross-pattern rubber grips provide superior cushioning and support, and the quick-release button allows easy access on the fly. The ratcheting design will secure items from 1” to 4” in diameter, while the Kwik Clip design allows for on/off rotational flexibility when adjusting in the field.
Transporting your tools off-road is a cinch with these Kolpin LinQ™ mounted gear grips. Two flexible, cushioned grips hold and protect a variety of tools, firearms, fishing poles, and other gear from 1” to 4” in diameter. The Kwik Clip design offers on/off rotational for easy in field adjustments to make room for more gear. Compatible with the Maverick and Maverick MAX (except X ds Turbo, X rs 2016) (RS) models.
Ride longer and more comfortably in challenging off-road conditions when you install this Kolpin® standard throttle master, a malleable and ergonomic extension that provides you with more precise throttle control in your ATV or UTV, and eliminates fatigue and soreness over long periods of time. This throttle attachment has a universal bolt-on design for easy attachment, and a blade length that adjusts for custom comfort.
Sturdy and reliable, this Kolpin® Gun Boot® loop bracket is compatible with all Gun Boot® IV, Gun Boot® 6.0, and Saw cases. Adjustable to multiple angles between 0° and 45°, this loop bracket has a rubber-coated ring to securely hold your case in place, as well as a locking pin to prevent jostling and vibration when riding on rugged terrain. The compact design leaves plenty of room on your ATV rack for the rest of your gear, and features a built-in mounting system that attaches to the bed rail of your UTV or any flat, drillable surface.
Kolpin's Pack Mount is a versatile mounting system that allows brackets to be attached to any box or flat drillable surface. The Pack Mount is constructed of tough plastic for superior strength and durability.
Designed to mount to virtually any rack, the Kolpin® Boottector® bracket is lightweight, durable, and compact to leave plenty of room for your other gear. Compatible with the Kolpin® Gun Boot® IV and Gun Boot® 6.0 cases, this bracket offers precision gun angle adjustability without the use of hand tools.