Marine greases need to resist water and hold up to tough conditions, and MAG 1's marine grease fits the bill. It resists being washed out by water, even salt water. It provides protection against rust, corrosion, and oxidation in conditions up to 500 degrees Fahrenheit.
Protect your equipment with MAG 1 synthetic ultra grease. It provides oxidation resistance and thermal stability at high temperatures while also delivering outstanding low temperature pumpability. It features a high film strength, extreme pressure protection, and anti-wear properties. With a dropping point higher than 500 degrees Fahrenheit and low temperature protection down to -40 degrees Fahrenheit, you'll be able to use this grease on a wide range of products!
Reduce engine friction by cleaning your fuel injectors and intake valves with MAG 1’s carburetor and fuel injector cleaner with FMX®. Formulated with jet fuel, it has outstanding cleaning power to fight power loss and restore performance. It can also smooth rough idles, protect against valve stem and seat wear at intake valves, and improve overall drivability.
MAG 1's power steering fluid with sealer and conditioner is a two-in-one formula that’s designed to stop leaks as well as soften and condition hardened seals and gaskets, especially those in older cars. It delivers other benefits, too, such as smoothing and easing steering operation. Simply add a bottle when changing or topping off your power steering fluid!
MAG 1's super lithium EP moly grease is tough enough to consistently deliver the protection and lubrication you need, even in extreme pressure operations. It operates between 0 and 350 degrees Fahrenheit, and it provides maximum protection against seizure, scuffing, and scoring. It's strong enough for industrial applications, but that doesn't mean you can't use it on the farm or on your vehicle!
MAG 1’s silicone spray delivers a number of benefits for your vehicle. It starts in the engine, where it lubricates and waterproofs for protection against wear. It doesn’t stop there, though. This silicone spray also quiets squeaks all over the vehicle, and it prevents your doors, locks, and trunks from freezing. It’s safe to use on metal, glass, rubber, and plastic, and it leaves a waterproof seal wherever you use it.
MAG 1 80W-90 gear lubricant is designed to ensure long equipment life by providing protection and spalling and other wear, especially in extreme heat, pressure, and torque operations. It maintains its viscosity in just about any condition, meaning your gear oil lasts longer and saves you maintenance time and operating costs.
In addition to improving your engine's lifespan and durability, MAG 1's 5W-20 Motor Oil can also increase fuel economy by reducing engine wear! It contains high quality hydrotreated, paraffinic lubricating oils and a technologically advanced additive system that includes dispersants, viscosity improver, anti-wear and anti-friction agents as well as oxidation and corrosion inhibitors. With MAG 1 Oil you put years of chemistry expertise into your engine.
MAG 1’s premium power steering fluid is formulated to meet or exceed the power steering specifications of all domestic and foreign auto manufacturers. It helps prevent slippage, wear, and corrosion, and improves your overall driving experience by smoothing steering operation.
Improve the lifespan, efficiency, and performance of your carburetor and choke with MAG 1’s carb and choke cleaner. It dissolves and removes carbon, gum, sludge, and varnish deposits from the manifold heat control valves, PCV valves, automatic chokes, carburetors, combustion chambers, linkages, and distributor shafts in your equipment. It works fast and is safe for oxygen sensors and catalytic converters, making MAG 1 carburetor and choke cleaner a useful product to keep on hand.
Protect the life of your hydraulic jacks and lift equipment with MAG 1's Hydraulic Jack Lubricant. It's formulated with oxidation stable base oils, rust inhibitors, antiwear agents, and antifoam agents that keep your jacks running with reduced friction and encourages a longer lifespan, even in tough operating conditions. Repairing or replacing damaged equipment can be costly and time-consuming, use MAG 1 oils instead!
Whether you're racing or just recreating in intense conditions, MAG 1's SAE 10W-40 high performance oil is formulated to give you the performance you need. It's designed for maximum protection at high RPMs that put your engine at risk for wear and tear. It virtually eliminates scuffing on your engine's components, and it also features excellent cold-flow properties that make this a good year-round option.
Keep your electric motors running, even their most sensitive components, with MAG 1's electric motor cleaner. It dissolves grease, dirt, oil, and wax buildups that can cause electrical failure if left unchecked. It easily cleans even the most sensitive electrical contacts, and it evaporates quickly while leaving no messy residue behind.
MAG 1's wheel bearing grease is designed and formulated for bearings operating under conditions of extreme pressure and high temperature. It can also be used for general purpose lubrication, and as a replacement for several conventional greases resulting in smaller inventory and less chance of misapplication.
MAG 1 lithium grease is a versatile product that's worth keeping around the shop. It provides the necessary lubrication and protection on a number of different projects. It can't hold up to extreme pressure operations, but it does withstand a wide range of temperatures (-15 to 350 degrees Fahrenheit) and its versatility ensures that you'll be reaching for this grease again and again.
MAG 1’s belt dressing is formulated to prolong belt life by preventing drying and cracking. It reduces slippage and also quiets those annoying squeaks and squeals. It works with any type of belt-driven equipment, making this a nice product to keep around the shop.
MAG 1's Marine TC-W3® 2-cycle engine oil is a perfect choice for all of your fuel lubricated or fuel injected 2-cycle engines. It's designed to keep your engine clean, prevent ring sticking, reduce spark plug fouling, and prevent scuffing. Be sure to follow your manufacturer's instructions when determining the correct oil-to-fuel ratios for your 2-stroke mixture.
Give your classic Ford vehicle the treatment it deserves with MAG 1's premium Type F automatic transmission fluid. This fluid is designed for all Ford automatic transmissions built prior to 1977, along with some models built between 1977 and 1980. Check with a professional if you're unsure what kind of transmission fluid you need to use.
MAG 1All Fleet 15W-40 Engine Oil is built for all heavy duty diesel and gasolineengines that require a CJ-4 or CI-4+ rated oil. It delivers reliable performance over a wide range of temperatures, and the superior anti-wear agents extend the engine's life, even if operating temperatures are high or you're slacking and not changing your oil as often as you should.
Protect your vehicle’s undercarriage from corrosion and abrasion with MAG 1 rubberized undercoating. It provides a professional-grade protective shield that remains elastic and resists cracking. It provides a number of benefits, such as rust and corrosion protection, preventing moisture collection, and even deadening sound to give you a quieter ride.
MAG 1's engine degreaser removes the toughest oil and dirt buildups from most engine components. It comes in an aerosol can with a high spray power that makes for quick coverage and cleaning. Safe on plastic as well as metal, it's a good cleaner for multiple applications, meaning that you might find yourself reaching for this bottle again and again.
MAG 1 full synthetic multi-vehicle automatic transmission fluid contains a unique combination of base stocks and advanced additives that work well with the newest transmissions. It provides resistance to thickening that comes with high temperatures. It also ensures friction stability in order to maintain smooth, consistent shift performance.
MAG 1's Synthetic Blend Multi-Ratio 2-Cycle Engine Oil is the easy way to pre-mix your oil and gas for 2-cycle engines. It contains an upper chamber that lets you easily measure your fluid, just squeeze the appropriate amount into the chamber and you're ready to mix!
MAG 1 Premium Non-Chlorinated Brake Parts Cleaner is specially formulated to quickly dissolve and remove brake fluid, oil, grease, and other contaminants from brake linings, drums and other brake parts. Cuts job time by evaporating quickly. Won't contaminate recyclable fluids. Can be used without dissembling the brake unit.