Use STA-BIL® Marine to fight Ethanol fuel related damage in engines used in high moisture environments. STA-BIL® Marine prevents corrosion, removes water, and cleans the fuel system to maximize performance. Recommended for use at every fill up in your boat, jet ski, or any other type of watercraft. 1 oz of fluid treats up to 10 gallons of fuel.
Make the proven choice! It’s no wonder mechanics everywhere rely on this product every day. Sea Foam Motor Treatment has withstood the test of time. It is a petroleum-based cleaner, lubricant, stabilizer, and moisture controller that mains fuel and oil system components. It will not harm engine component, seals, gaskets, catalytic converters or oxygen sensors. Sea Foam Motor Treatment should be a staple in everyone’s garage!Clean, Control, Lubricate, and Stabilize! Sea Foam Motor Treatment will help:* Clean Injectors* Clean Carb Jets* Clean Deposits* Control Moisture in Fuel Systems* Add Lubricity and Protection to Fuel* Anti-corrosive* Lube Upper Cylinders* Quiet Noisy Lifters* Stabilize Fuels for up to 2 Years* Clean Passageways* Liquefy Gun and Varnish* De-Ice and Anti-Gel* Clean Intake Valves* Clean Pistons
Lucas upper cylinder lubricant is like a tune-up in a bottle! Whether you're running gas or diesel, carbureted or fuel-injected, it's compatible with your equipment and delivers a blend of oils, additives, and detergents that keeps your engines operating at peak efficiency. It cleans and lubricates the carburetor and injectors to allow them to burn fuel more thoroughly, which increases power while decreasing fuel consumption. It also helps engines pass smog and emissions tests, and it meets federal requirements for use with low-sulfur diesel fuels.
Lucas Oil's heavy duty oil stabilizer delivers a number of cost-saving benefits to your equipment. It's 100% petroleum, meaning that it can safely blend with all automotive lubricants. It drastically extends the life of motor oils and also gives them a higher degree of lubricity, which reduces oil consumption and operating temperatures. You can also use it with gear oil to stop leaks and reduce operating temperatures. Protect your equipment — and save yourself time and money in the long run — with Lucas Oil's heavy duty oil stabilizer.
Formulated to meet Enviromental Protection Agency requirements, Valvoline's diesel exhaust fluid fuel additive helps on-highway diesel engines meet the EPA's near zero NOx emissions levels. Thanks to the easy-pour vent on this 2.5 gallon bottle, you have no mess when you add this additive to your tank. Simply add and go.
Reduce engine friction by cleaning your fuel injectors and intake valves with MAG 1’s carburetor and fuel injector cleaner with FMX®. Formulated with jet fuel, it has outstanding cleaning power to fight power loss and restore performance. It can also smooth rough idles, protect against valve stem and seat wear at intake valves, and improve overall drivability.
Power Service's Diesel 911 is great for winter emergencies. It helps restores the flow of fuel to the engine caused by gelled fuel or frozen fuel filters.
Howes Lubricator's Diesel Treat diesel conditioner & anti-gel helps prevent diesel fuel gelling and safely removes water from diesel fuel. Diesel Treat also cleans and lubricates fuel injectors.
Most of us have something gas-powered that we occasionally store for one month or longer without using, whether that's a lawnmower or sports car during winter, something classic that you only want to use on special occasions, or a generator or similar piece of gas-powered equipment. Keep all of these vehicles and more in tip-top condition during storage with STA-BIL® fuel stabilizer. There's no need to drain your tank with STA-BIL®, just add it to a full tank and run the engine for a few minutes to ensure that the stabilizer makes its way through the entire fuel system.
MAG-1's premium octane booster withFMX® is formulated with jet fuel andworks to increase the octane level in any type of gasoline. With regular use it can improve performance and power as well as eliminate the knock and ping that can damage your engine over an extended period of time. Other benefits include reducing friction, smoothing rough idles, restoring acceleration, and improving the overall performance of low octane gasolines.
Mechanic In a Bottle™ is a synthetic fuel additive that works in power equipment with 2 and 4-cycle engines. It removes all varnish in the fuel system without having to remove the carburetor, removes carbon deposits and water, revitalizes rubber and plastic components, replaces lost Octane, and rejuvenates old fuel. Overall, it cleanses equipment's fuel systems so that it starts efficiently and operates in top condition.
Mechanic in a Bottle™ Ethanol Shield Fuel Stabilizer eliminates then prevents ethanol related problems in power equipment with 2-cycle and 4-cycle engines. It removes water, prevents corrosion, provides easy engine starting all year, and keeps stored fuel fresh. It conforms to Military Specifications (Mil-Spec) providing a level of protection never before available to the general public. It includes Mil-Spec All Metal Anticorrosive Package (Top Level ASTM & NACE Ratings) and Mil-Spec Antioxidant Package - Up to 25X more anti-oxidants compared to leading competitors.