Harvest King's SAE 15W-40 all fleet diesel engine oil is designed for engines built in 2007 or later that require an oil rated API CJ-4 or CI-4 Plus. It has exceptional resistance to thermal degradation, and it keeps soot suspended in the oil instead of in your engine components. It contains anti-wear agents that help extend your engine's life, and it also resists viscosity increase as well as the wear and deposit formation that often follows.
This 2-cycle engine oil has outstanding engine cleaning characteristics, plus "ultra" lubricating qualities that are superior to other 2-cycle engine oils. This fully synthetic oil is also highly biodegradable, degrading by 80% in 21 days.
Make sure your engine stays well-lubricated with Honda's SAE 10W-30 Motor Oil. Formulated for use in 4-stroke engines. Exceeds all requirements for API service classification SM, all new Honda Power Equipment warranty standards and all Owner's Manual recommendations for Honda Power Equipment.
Lube King's Turbine Shaft Drip Oil is formulated for use in agricultural irrigation well pumps. It provides an even flow to ensure that the pump shaft is properly lubricated. With the 5 gallon container you'll have plenty of time before you need to restock.
Lube King's SAE 15W-40 all fleet diesel engine oil is designed for engines built in 2007 or later that require an oil rated API CJ-4 or CI-4 Plus. It has exceptional resistance to thermal degradation, and it keeps soot suspended in the oil instead of in your engine components. It contains anti-wear agents that help extend your engine's life, and it also resists viscosity increase as well as the wear and deposit formation that often follows.
Formulated to combat sludge and engine wear, Mobil Super 5W-30 is a premium conventional motor oil that contains more cleaning additives for extended engine life and improved performance. Recommended for gasoline-filled vehicles and light-duty trucks, this motor oil is an essential for keeping your engine in top performance condition.
Lube King's non-detergent oil contains no additives and works well in engines built before 1930, engines that operate in the mildest of conditions, and applications that specifically call for non-detergent oil. If you have an engine that has been taking non-detergent oil for its whole life, it's a good idea to continue using non-detergent oil unless you're doing a total overhaul, as oil with detergents will stir up the particles that have been settling for years with non-detergent oil.
Save fuel and extend engine life with Mobil Delvac 1 ESP 5W-40, a synthetic heavy-duty diesel engine oil that supports exceptional performance in low emission diesel engines. Delvac 1 ESP 5W-40 maintains its viscosity and performance at the higher temperatures where standard diesel oils begin to degrade, a property that reduces engine wear and ultimately results in longer engine life.Recommended for use in mixed engine fleets and with all super high performance diesel applications, including modern low emission engine designs Exhaust Gas Recirculation (EGR), after treatment systems with Diesel Particulate Filters (DPFs) and Diesel Oxidation Catalysts (DOCs). Meets requirements of API CJ-4/CI-4 PLUS/CI-4/CH-4/SM/SL; ACEA E7, E9; Caterpillar ECF-3, ECF-2; Cummins CES 20081; Twin Disc S364A.
Accel's non-detergent motor oil is a good oil for older cars and trucks that are used during mild operating conditions. It's also useful in industrial applications that specify a non-detergent oil. This oil is not recommended for use in automobiles built after 1930. However, if you have an old engine that has been running its entire life on non-detergent oil, it's best to keep using non-detergent oil unless you're doing a total overhaul. For applications requiring a a non-detergent oil with a 30-Weight viscosity, use this Accel product.
This 30W diesel engine oil by Lube King is designed to be used in your entire fleet of diesel vehicles! It's compatible with all diesel engines that require a 30W oil, and it protects your engine with a high film strength that makes for even distribution and consistent coverage.
Extend the life of your air compressor with MAG 1 Air Compressor Oil! It's compatible with all oil-lubricated air compressors, and it's specially formulated to maximize compressor pump and valve life.
Meet emission requirements while boosting your fuel efficiency and reducing operating costs with Chevron Delo 400LE 15W-40 heavy duty motor oil. It meets the requirements of post-2007 low emission engines, but it's also backward compatible to work with older conventional engines. This blend is especially effective in engines that use ultra-low sulfur diesel fuel, though it also works quite well with normal and low sulfur diesel.
MAG 1 75W-90 Full Synthetic Gear Lubricant is designed to protect your equipment from heavy loads and extreme operating temperatures. It's formulated with high viscosity synthetic base oils and includes a blend of additives that protect hypoid gears, manual transmissions, gear boxes, passenger car and light truck conventional differentials, transmissions, and steering gears from extreme ambient and operating temperatures, not to mention the wear, tear, and heavy loads that today's jobs demand.
MAG 1's Synthetic Blend Multi-Ratio 2-Cycle Engine Oil is the easy way to pre-mix your oil and gas for 2-cycle engines. It contains an upper chamber that lets you easily measure your fluid, just squeeze the appropriate amount into the chamber and you're ready to mix!
Lucas Semi-Synthetic 2-Cycle Oil is a unique blend of mineral oil, synthetic oil, polybutene, and a low-ash additive system. The techs at Lucas pre-dilute this oil with a special solvent that facilitates mixing with gasoline at all temperatures. It's especially adept at preventing carbon deposits from forming on the piston rings, skirt, crown, and under crown areas. It's recommended for use in air and liquid cooled two-stroke engines such as snowmobiles, weed eaters, leaf blowers, chain saws, etc... and it works under all operating conditions.
Lucas puts their years of racing and industrial experience into each bottle of their oil, including this High Performance Motorcycle/ATV Oil. This oil is compatible with any air-cooled or water-cooled motorcycle or ATV engine. On top of its performance-enhancing features, it lasts up to four times longer than most motorcycle oils!
Keep your vehicle’s engine running like new with Mobil 1 5W-30 synthetic motor oil. Synthetic oils are engineered to result in less engine wear and an ultimately longer engine life. Mobil 1 5W-30 breaks down much more slowly than a conventional oil, which helps protect your engine more effectively between oil changes. It continues to flow as low as -40°F and withstands temperatures up to 500°F, for a full range of temperature protection.
Lube King's 10W-30 is a solid motor oil for gasoline engines that require a 10W-30 oil. It delivers a little extra viscosity in cold conditions, which can help keep a protective film over some engine components. Of course, consult with a professional to determine what's best for you, as the higher viscosity can also make it more difficult to start in cold temperatures if you store your vehicle outside.
Engineered for both light- and heavy-duty applications, Mobil 1 Turbo Diesel Truck 5W-40 is a fully synthetic motor oil that helps to extend engine life while ensuring long drain capability and outstanding fuel economy in modern diesel engines.Appropriate for use in mixed fleet operations, this motor oil features inherent stay-in-grade shear stability that maintains viscosity and reduces wear on engine parts for longer, smoother service in severe, high-temperature applications. You’ll spend less, go farther, and get more work done.
Mobil Delvac 1300 Super 15W-40 is a heavy-duty diesel engine oil engineered for superior performance in the most demanding diesel engines out there. Ideal for both on- and off-highway use, this conventional engine oil results in a quieter, smoother engine, as well as longer engine and oil life in the most severe trucking conditions. Reduced engine deposits and sludge build-up keep engines running reliably, while superior soot-viscosity control bumps up engine efficiency.A great option for construction, mining, quarrying, and agricultural applications, Mobil Delvac 1300 Super keeps oil costs down while promoting more dependable engine performance.
MAG 1's Marine TC-W3® 2-cycle engine oil is a perfect choice for all of your fuel lubricated or fuel injected 2-cycle engines. It's designed to keep your engine clean, prevent ring sticking, reduce spark plug fouling, and prevent scuffing. Be sure to follow your manufacturer's instructions when determining the correct oil-to-fuel ratios for your 2-stroke mixture.
MAG 1 80W-90 gear lubricant is designed to ensure long equipment life by providing protection and spalling and other wear, especially in extreme heat, pressure, and torque operations. It maintains its viscosity in just about any condition, meaning your gear oil lasts longer and saves you maintenance time and operating costs.
Accel's non-detergent motor oil is a good choice for older cars and trucks that are used during mild operating conditions. It's also useful in industrial applications that specify a non-detergent oil. This oil is not recommended for use in automobiles built after 1930. Additionally, if you have an old engine that has been running its entire life on non-detergent oil, it's best to keep using non-detergent oil unless you're doing a total overhaul.