The Coil Roofing Nailer has a compact body design for better balance and control with capabilities of: 70-120psi, 3/4" - 1-3/4" nails, capacity of 120. It has a tool-free, adjustable shingle guide for accurate shingle placement, along with a selectable trigger for easy change between sequential or contact mode. This unit also features a quick-set depth of drive to prevent single damage, and skid-resistant pads / wear guards for safety and tool protection. The over-molded grip is designed for comfort and control.
This Ingersoll Rand 311G air sander will make your projects that involve sanding get finished quicker and easier. It has a dual-action motion that allows for swirl-free finishes, so you won’t have to spend time touching anything up manually. The professional-touch trigger allows you to easily and comfortably control your sanding speed, and it also features a built-in silencer that significantly muffles noise output, allowing for a more pleasant work environment.
Has your friend gotten tired of you always borrowing his? Well, maybe the time has come to get your own D51276 15 Gauge Trim Nailer. This will be your number one, “go-to” trim nailer. You probably already know it’s the best for baseboards and conquers casings and quarter-round too. Its 34° angled design and no-mar rubber pad let you nail at the proper angle in tight spaces, while not leaving a trace. Its articulating air connection lets you work comfortably without fighting with your hose. Don’t forget to set your nails to the proper depth with the tool-free, depth-setting wheel. If a nail gets jammed, don’t worry, you can swiftly clear the jam without a tool from the quick-release front port and get back to nailing. This Kit also includes a carrying case, sample nails to get you started, and safety glasses to boot. Pick one up for yourself today. Your friend needs his back.* Sealed Lube Dual Tech: motor works as an oil free and oil lube unit.* Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360° exhaust.* Uses 1" to 2-1/2" (25.4mm-65mm) 34° collated nails, rear load.* Includes carrying case, sample finish nails and safety glasses.* Low profile no-mar pad.* Sequential action trigger installed.* Trigger lock-off.* 70-120 PSI operating pressure, lightweight 3.85 lbs (1.75 kg).
Invest in a pneumatic nail gun that delivers professional level performance with the DEWALT D5127K 16 Gauge 1" - 2-1/2" Finish Nailer. It operates at 70-120 PSI and uses 1"-2.5" 16 gauge straight nails. Weighing a mere 3.85 pounds it's lightweight enough to minimize user fatigue, even during all-day use, meaning you can stay on the job longer and get it finished sooner. Convenient tool-free features like an adjustable belt hook, nail depth adjustment, and jam clearing mean that this staple gun will minimize downtime.
* Long life maintenance-free motor to keep from staining the work surface.* Tool-free depth-of-drive adjustment with detents for proper setting of nail heads.* Tool-free jam release mechanism for easy nail removal.* Rear exhaust to keep contaminates away from work.* Drives 18 gauge nails from 5/8" to 2" length.* Magnesium body delivers strong & lightweight design.* Adjustable belt hook allows the tool to be kept near the user.* Kit includes: 500 nails of 1-1/4", carrying case, and owners manual.* Removable non-marring nose tip with on tool storage.* Integrated rubber grip for improved comfort.* Sequential style trigger.
At 20,000 RPM, the Ingersoll Rand 3101G die grinder delivers enough power for just about any job. It has an angled shape that makes it easy to handle, especially when you’re working in confined and hard-to-reach places. It features a grease fitting that makes lubricating the 3101G a breeze, a soft ergonomic grip that eats up vibration and reduces user fatigue, a rear exhaust, and a self-locking throttle for even easier use.
* Long life maintenance-free motor to keep from staining the work surface.* Tool-free depth-of-drive adjustment with detents for proper setting of staples.* Rear exhaust to keep contaminates away from work.* Drives 18 GA. staples with 1/4" crown from 1/2" to 1-1/2" length.* Magnesium body delivers strong & lightweight design.* Adjustable belt hook allows the tool to be kept near the user.* Kit includes: 500 staples of 1", carrying case, and owners manual.* Removable non-marring nose tip with on tool storage.* Integrated rubber grip for improved comfort.* Sequential style trigger.* Low staple reload indicator to alert when to reload.
Invest in a long-lasting tool with this Porter Cable nail gun. The built-in piston ring design prevents cylinder bore scuffing and lasts longer than conventional "O" rings. Features like a bump-fire trigger and a quick-release nosepiece allow you to spend more time on the project at hand and less time fidgeting with your machine. 3/8-inch NPT air inlet allows for optional use of a 3/8 inch quick coupler (not included) for better airflow in high-production applications.
Ingersoll Rand’s 170G 3/8” ratchet can help make a number of your projects easier. It delivers 55 ft-lb of torque and 170 RPM of free speed, making it powerful enough to accomplish what you need in tight spaces. It has a heat-treated head for a long life, and the contoured, ergonomic handle makes it feel second nature to use the 170G.
The Edge air hammer is the go to tool whether you're cutting panels, fixing exhaust systems, or making general repairs. Powered by compressed air, this tool delivers a 2-5/8-inch stroke and 3,500 blows per minute (BPM) and is equipped with a quick-change retainer that makes it easy to swap chisels. Its rugged design sports an alloyed steel barrel and a heat-treated piston.
Ingersoll Rand’s 236G is a versatile impact wrench that’s a good addition to any workshop or garage. It delivers 1,200 blows per minute and operates at up to 450 ft-lb of maximum reverse torque. It has a durable single hammer impact mechanism that ensures a long life to go along with features that make the 236G extremely easy to use, such as a comfortable variable speed trigger, a one-handed forward/reverse switch, and an ergonomic grip that eats up vibration and reduces user fatigue.
Weighing just 4.3 pounds, the Ingersoll Rand 2100G is an impact tool that’s comfortable to use for even long periods of time. It still delivers the necessary power, with 550 ft-lb of maximum torque, and it has other features that allow for greater ease of use, such as an intuitive variable speed trigger, a forward power regulator, a handle exhaust that blows away from your hands and your project, and a 360° swivel inlet that allows for greater maneuverability.
Ingersoll Rand’s EB2125X impact tool combines power and ease of use. It delivers a hefty 690 ft-lbs of torque, but with it features Ingersoll Rand’s quiet technology that drastically reduces noise, giving you a surprisingly quiet operation. It also features an easy one hand forward/reverse switch, a feather touch trigger that makes the EB2125X easier to control, and a handle exhaust that blows air away from your project.