The DEWALT DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.* DEWALT brushless motor delivers up to 57% more run-time over brushed* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas* DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas* DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces* DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
You want it all! And you need it. Well with DEWALT and murdochs.com you can have it and then some, and at an amazing price - delivered to your door! Check it out. This 20V MAX* Li-Ion 5-Tool Combo Kit is Complete: you get the Hammerdrill / Drill/Driver, the Recip Saw, the 6 ½” Circular Saw with Carbide Blade, the ¼” Impact Driver with 3-LED light system, and a 20V Worklight. What can’t you do with this Kit? All you need is lumber and screws!! Plus, you get two of the top-of-the-line 20V MAX* Li-Ion Batteries with 3.0Ah, giving you up to 57% more speed and up to 35% more run time, as well as a Charger and a Contractor Bag. Now that’s a lot of Combo!! * DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention.* DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.* DCS393 20V MAX* circular saw with 6-1/2" carbide blade can cut 2x4's at a 45° angle in a single pass.* DCL040 20V MAX* LED work light delivers 110 lumens of light output.
This 20V MAX Premium 5-Tool Combo Kit (DCK592L2) comes fully loaded and ready to tackle any project you can dream up. A hammer Drill with a patented 3-speed all metal transmission and ½” all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention. The reciprocating saw has a 4-position keyless blade clamp which allows for quick and easy blade change. The impact driver features 3 LED Lights, and the circular saw features a 6-1/2” carbide blade that can cut 2 x 4’s at a 45 degree angle in a single pass. The LED work light delivers 110 lumens of light output, brightening a variety of work conditions.
DEWALT's DCK240C2 Impact Driver features:* DCD771 Features two speed transmission (0-450 / 0-1500 RPM)* DCD771 High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications* DCD771 Compact, lightweight design fits into tight areas* DCD771 1/2" single sleeve ratcheting chuck provides tight bit gripping strength* DCD771 Ergonomic handle delivers comfort and control* DCF885 Compact (5.55" front to back), lightweight (2.8 lbs) design fits into tight areas* DCF885 One-handed loading 1/4" hex chuck accepts 1" bit tips* DCF885 features 3 LED light ring withe 20 second delay to provide visibility without shadowsIncludes:* (1) DCD771 - 20V MAX* 1/2" Drill/Driver* (1) DCF885 - 1/4" Impact Driver* (2) 20V MAX Lithium Ion 1.3 Ah Battery Packs* (1) 20V MAX charger* (1) Contractor Bag
DEWALT’s 20V MAX Lithium Ion Compact Drill/Driver Kit (DCD771C2) is remarkably compact and lightweight. This Drill/Driver features a heavy-duty ratcheting ½” chuck for optimal gripping on bits and accessories. The 20V Li-ion Batteries offer much longer run times, charge quicker, and have longer lives than traditional NiCd batteries - and they weigh so much less!The DCD780C2 also offers a dual-speed transmission, allowing for operating speed of 0-450 rpm and 0-1500 rpm for a wide range of fastening and drilling applications. It’s cherished by the contractor, applauded by the homeowner, and envied by the competition. Get yours today and step into the future.
A gyroscopic screwdriver is a must for working in confined areas, and this DEWALT 8V MAX gyroscopic screwdriver kit has everything you need to get the job done faster. The motion-activated variable speed (0-430rpm) and reversing control helps you quickly and precisely fasten into wood, plastic, and light-gauge metals. Illuminate dark, confined areas without shadowing, and switch between in-line and pistol-grip operation with the adjustable handle. The included 8V MAX battery pack lets you work for longer, and recharges in only one hour.
20V MAX* XR Lithium Ion Oscillating Multi-Tool Kit DCS355D1* DEWALT Brushless Motor delivers up to 57% more run time over brushed* QUICK-CHANGE™ Accessory System allows blades and attachments to be changed quickly without wrenches* DUAL-GRIP™ Variable Speed Trigger gives users ultimate speed and application control* Bright LED light illuminates dark work surfaces for accurate cutting* DEWALT Oscillating Tool Guide System allows users to set the depth or height for a series of cuts* 28 Piece DEWALT accessory kit includes popular cutting and sanding attachments* Universal Accessory Adaptor for use with most oscillating tool accessory brands* Tool Length: 12.20"* Oscillations/min: 0-20,000opm* Oscillation Angle: 1.6"DCS355D1 Includes:* DCS355 20V MAX XR Oscillating Tool* DCB203: 20V MAX XR Compact Li-Ion Battery (2.0Ah)* fast charger* DEWALT Oscillating Tool Guide System* wood with nails blade* sanding pad* (25) sheets of sanding paper* universal accessory adaptor* contractor bag* accessory storage box
The DCK299D1T1 features our DCD996 20V MAX* 1/2" 3-Speed Hammerdrill and DCF887 20V MAX* 1/4" 3-Speed Impact Driver. This kit comes with one 60V MAX* Flexvolt lithium ion battery, one 20V MAX* XR lithium ion compact battery and fast charger.This DEWALT FLEXVOLT 3-Speed Hammerdrill & Impact Driver Kit DCK299D1T1 features:* DCD996 20V MAX*1/2" hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time* DCD996 20V MAX*1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials* DCD996 20V MAX*1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lb) design to fit tight areas* DCD996 20V MAX* hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model* DCF887 20V MAX* 1/4" impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute* DCF887 20V MAX* 1/4" impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lbs) designIncludes:* (1) DCD996 20V MAX* XR 1/2" 3-Speed Hammerdrill* (1) DCF887 20V MAX* XR 1/4" Impact Driver* (1) DCB203 20V MAX* XR 2.0AH Lithium Ion Battery* (1) DCB606 20V / 60V MAX* Flexvolt 6.0AH/2.0AH Lithium Ion Battery* (1) DCB118 20V / 60V MAX* Fan-Cooled Rapid Charger* (2) Belt Hooks* (1) 360 Degree Side Handle* (1) Contractor Bag
The DCG414T1 4-1/2"-6" (115mm-150mm) Grinder with Kicback Brake is maximized for power and durability. It delivers 13 amp power as compared to the D28144N with the portability and convenience of cordless through DEWALT's revolutionary FLEXVOLT technology. The DCG414T1 comes with one 60V MAX* lithium ion battery and fast charger.This DEWALT FLEXVOLT 60V MAX* Grinder w/1 Battery DCG414T1 features:* 13 Amp Equivalent Motor as Compared to a D28144 Corded Unit* Brake engages when trigger is released, stopping speeds of 1.5 seconds with standard grinding wheel (4-1/2" x 1/4" Bonded abrasive wheel, non-hubbed)* Kicback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off.* E-Clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor.* 9,000 RPM Speed allows the use of up to 6" wheels* Allows for up to 6" wheel size for both cutting and grinding applications.Includes:* (1) DCG414 Grinder* (2) DCB606 FLEXVOLT™ Lithium Ion Batteries* (1) Fast Charger* (1) Side Handle* (1) 4-1/2" (115mm) Type 27 Wheel* (1) 4-1/2" (115mm) Type 27 Guard* (1) 6" (150mm) Type 27 Guard* (1) Wrench* (1) Flanges* (1) Kit Bag
DEWALT’s 20V MAX* Lithium Ion Grinder Tool has a 7,000 RPM motor that provides high-power for cutting and grinding applications. A Quick-Change™ Wheel Release allows for tool free wheel changes without the need for a wrench. The 2-position side handle gives you better control, comfort and versatility while grinding. You’ll also find that the 2-finger trigger switch with a lock-off button allows convenient activation and easier gripping.DPG20 Kit Includes:* DCG412 Grinder* (2) DCB205: 20V MAX* XR Premium Li-Ion Battery (5.0 Ah)* Fast charger* Spanner wrench* 5" (125mm) Type 27 (grinding) guard* 2-Position side handle* Contractor Bag
The Big Deal. You’ve got big jobs. You’ve got big responsibilities. You need tools that can deliver Big, and you need a bunch of ‘em. Luckily, Murdoch’s has the big-time Combo Kit that brings the goods: The DCK490L2. It’s a 20V MAX* 3.0Ah (the big boys!) Li-Ion 4-Tool Combo. You get the 20V MAX* ½” Hammerdrill / Drill/Driver, the Recip Saw, the ¼” Impact Driver, and the 20V MAX* LED Work Light. It’s perfect for the professional contractor – you’ll use it everyday - and ideal for the property owner who needs a tool system they trust when heavy-demand projects come up, and they do. And since you’re getting big savings by going with the DEWALT Combo Kit from murdochs.com, you can treat yourself to those Carhartt's – they come in all sizes, even big.* DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention.* DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.* DCL040 20V MAX* LED work light delivers 110 lumens of light output.
Now here’s a smart tool to have! The DW920K-2 is DEWALT’s 7.2V Cordless Two-Position Screwdriver and has been a favorite find of contractors, homeowners, and do-it-yourselfers for years. Sure, drills and screw-guns are important to have, but when you want total control, versatility and power when you need it, you’ll never find a better Cordless Screwdriver than this one. It has a sleek design and Two-Position options for comfort and suitability for more projects. It also has multiple torque settings so you can dial in the proper driving strength for the job. Its variable speed lets you have total control – from gentle/slow for delicate work to high speed for drilling pilot holes in wood or rapid screw-driving applications. The ¼” hex shank chuck makes swapping bits a breeze while the 7.2V Battery has ample power and run time, but is compact and ultra-portable. The Kit comes with 2 Batteries and a Charger so you know you’ll always be ready for the bigger jobs, too. You’ll be smarter just for owning one.* 80 in-lbs of maximum torque output provides for a superior power to weight ratio in a variety of fastening applications.* Adjustable two-position handle allows for operation as both in-line and pistol-grip.* Variable speed and reversing trigger switch provides 0-500 rpm for fastening and pre-drilling into wood, plastic, and light-gauge metal.* Industrial quick-release hex-shank chuck allows for quick screwdriver bit change and prevents bit "run out".* Electric brake provides increased productivity.* 7.2V battery pack allows for longer run-time and charges in one hour.* Heavy-duty metal hinge provides secure and sustained two-position lock.
This horizontal/vertical metalworking bandsaw from Jet has everything you need to tackle even the toughest of jobs. This saw has a wider, higher stand with a built-in storage cabinet and chip tray for greater ease of use, and offers a 9-7/16” x 10” work table in the vertical position. It has an adjustable material stop for easier repeatability—the rapid action vise miters to 45 degrees.
This DEWALT Hammerdrill and Impact Driver Combo kit DCK299P2 features a DCD996 20V MAX XR 3-speed ½” hammerdrill that has 3-speed and was built for high performance (0-2250rpm), and features an all-metal transmission to optimize tool-to-task for fast application speeds and improved runtime. This tool can also be used for fast drilling in masonry materials while maintaining a compact size and lightweight design, measuring 8.4” front-to-back length and weighs 4.7 lbs, to fit into tight areas.The DCF887 20V MAX XR ¼” impact driver provides 1825 in-lbs if max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. This tool also features compact size and lightweight design, measuring 5.3” front-to-back length and weighing 3.4lbs.
12V MAX* 1/4" Impact Driver Kit DCF815S2* Compact, lightweight design fits into tight areas.* 3 LED Lights provide visibility without shadows.* One-handed loading 1/4" hex chuck accepts 1" bit tips.* Belt hook included for portability.
The DEWALT DCK385C2 20V MAX combo kit features a 20V MAX lithium 1/4-inch impact driver, 20V MAX lithium compact hammer drill, and a compact worksite radio. Built with contractors in mind, these tools are powerful and reliable, allowing users to tackle a variety of home improvement and professional jobs. DEWALT’s line of 20V MAX lithium-ion tools features improvements in engineering and design to provide the performance, reliability, and ergonomics that contractors require.Ideal for professionals including remodelers, carpenters, cabinetmakers and installers, woodworkers, electricians and plumbers, these tools offer powerful performance, convenience, and innovative features professionals expect from DEWALT power tools and accessories.* DCD785 20V MAX lithium compact hammer drill* DCF885 20V MAX lithium 1/4-inch impact driver* DCR018 worksite radio* (2) 20V MAX 1.5 Ah Lithium-Ion Battery Packs* Battery Charger* Contractor Bag
The DCS575T2 7-1/4" (184mm) Circular Saw with Brake is maximized for runtime and durability. It delivers the power and cut capacity of a corded circular saw with the portability and convenience of cordless through DEWALT's revolutionary FLEXVOLT technology. The DCS575T2 comes with two 60V MAX* lithium ion batteries and one fast charger.Includes:* (1) DCS575 7-1/4" (184mm) Circular Saw* (1) 7-1/4" Circular Saw Blade* (2) 60V MAX* Lithium Ion Battery Packs* (1) Fast Charger* (1) Blade change wrench
DEWALT’s 20V MAX Brushless Compact Hammerdrill is a versatile tool that lets you tackle drilling and hammering projects in a variety of materials. It’s equipped with a brushless motor to give you plenty of extra runtime when compared to brushed models, up to 57% more! It has a gauge that allows you to monitor your battery charge, and this kit comes with two 2.0Ah battery packs and a charger so that you don’t have to worry about downtime holding up the job. It’s built to be compact (7.5” front to back) and lightweight (3.6 pounds) to fit into tight areas and give you plenty of control over your work, and the 3-mode LED illuminates dark workspaces.Kit includes DCD 796 20V MAX Li-Ion Compact Hammerdrill, two 2.0 Ah battery packs, charger, carrying case, and belt hook.
Eliminate your downtime while still enjoying the convenience of cordless with this DEWALT 20V XR Brushless 1/4” 3 Speed Impact Driver Kit. The efficient brushless motor offers plenty of run time, and this kit includes two 20V MAX XR batteries and a fast charger so that you’ll always have some juice. The 3 speed settings allow you to optimize for the job at hand, and there are 3 built-in trigger-activated LED lights to illuminate your work area, even if you’re working in dark nooks and crannies.Kit includes 1 DCF887 Brushless Impact Driver, 2 DCB203 2.0 Ah 20V MAX XR batteries, charger, belt clip, and carrying case.
This 16-gauge Angled Cordless Finish Nailer Kit from DEWALT has everything you need to get to work within a couple hours of opening the box. The nailer delivers 16-gauge angled nails from 1-1/4” to 2-1/2” lengths, and it offers a sequential mode for precision placement a bump mode for speedier operation. It features a tool-free jam release, depth adjustment, and stall release so that you can minimize your downtime, and there’s also trigger-activated LED lights to illuminate dark workspaces. This kit also comes with a DEWALT 20V MAX 2.0Ah battery pack (DCB203) and a charger (DCB112).
Oscillating Tool Kit DWE315K* Powerful 3.0 Amp Motor provides strong performance for cutting and sanding.* QUICK-CHANGE™ Accessory System allows blades and attachments to be changed quickly without wrenches.* DUAL-GRIP™ Variable Speed Trigger gives users ultimate speed and application control.* Bright LED Light illuminates dark work surfaces for accurate cutting.* DEWALT Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability.* 29 Piece DEWALT accessory kit with storage box includes popular cutting and sanding attachments.* Multi-brand accessory adaptor allows for use with most oscillating tool accessory brands.DWE315K Includes: * DEWALT Oscillating Tool Guide System* Wood with nails blade* fast-cut wood blade* semi-circle blade* sanding pad* (25) sheets of sand paper* accessory storage box* multi-brand accessory adaptor* contractor bag
Don’t settle for second best. Get the tool that will be there for you when the going gets tough. Get it from the store you can trust. Get the DW331K from Murdoch’s. It’s the Guaranteed Tough® Heavy-Duty, Variable-Speed, Top-Handle Jig Saw made by DEWALT. This top performer features a powerful 6.5 Amp Motor that delivers up to 3,100 strokes per minute at variable speed with 4-Position Orbital cutting action for maximum efficiency and cut quality in the widest range of materials. The Top-Handle design with extra-large rubber grip, combined with the counter-balance mechanism, makes for a comfortable tool that diminishes vibrations and allows for greater control and precision. The integral dust blower lets you saw continuously as it clears the path for you – no more stopping to blow the dust off you line! The DW331K also features detents at 0°, 15°, 30°, and 45°, making common bevel-angle selection a snap. Basically, it’s the best. * Powerful 6.5 Amp motor delivers the cutting power for the most demanding materials.* Variable speed delivers 500 - 3,100 strokes per minute for optimal cutting speed for all applications.* Keyless lever-action blade clamp for quick and easy blade changes.* All-metal gear case and keyless blade lever enhance tool durability in a professional shop environment.* 4-position orbital action allows for faster, more aggressive cuts.* Positive bevel detents ensure accuracy at the most common angles 0°, 15°, 30°, and 45°.* Counter-balance Mechanism reduces vibration and user fatigue.* Extra-large rubber grip dampens vibration and provides comfort during prolonged use.* Integrated dust blower maintains visibility of cut line.* Non-marring plastic shoe cover protects soft or glossy materials from scratches from the shoe.
The DEWALT 60V Max* VSR Stud and Joist Drill with E-Clutch System features a 1/2" chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 60V brushless motor,E-Clutch System,mechanical clutch,and 2 variable-speed ranges. Equipped with the innovative bind-up control feature called E-Clutch System this drill increasing user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.This DEWALT FLEXVOLT 60V MAX* VSR Stud and Joist Drill Kit with E-Clutch System DCD460T2 features:* 60V Brushless Motor for increase power and runtime* Power of a cord with cordless freedom* Adjustable bail handle and 2-position side handle for leverage and control* 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application* E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.* Metal-gear housing for jobsite durability and increased reliability* The DEWALT; Perform and Protect; line of power tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.Includes:* (1) DCD460 Drill* (2) DCB606 FLEXVOLT™ Lithium Ion Battery* (1) Fast Charger* (1) Chuck Key and Holder* (1) 2-Position Side Handle* (1) Adjustable Bail Handle* (1) Kit Bag
12V MAX* 1/4" Screwdriver Kit DCF610S2* Compact, lightweight design fits into tight areas.* 3 LED Lights provide visibility without shadows.* One-handed loading 1/4" hex chuck accepts 1" bit tips.* Belt hook included for portability.