DEWALT's DCK263D2 20v MAX* XR Li-Ion Cordless Drywall Screwgun & Impact Driver Kit has a powerful motor to deliver maximum runtime. Features a lightweight, ergonomic design and 4,400 rpm speed.DEWALT's DCK263D2 Combo Kit Includes:* (1) DCF620 20v MAX* XR Li-Ion Brushless Drywall Screwgun Tool* (1) DCS551 20v MAX* XR Li-Ion Cordless Cut-out Tool* (2) DCB203: 20V MAX* Compact Li-Ion Batteries (2.0 Ah)* (1) DCB112 - Multi-voltage charger
DEWALT's 20-Piece Impact Ready Magnet Tough Case Set DWMTCIR20 features magnets that allow the case to be fixed to any ferrous surface. Built-in hooks allow this case to be hung as well. Impact resistant material helps to prevent breakage so that your tools stay safe in one place.DEWALT's DWMTCIR20 Impact Ready Magnet Tough Case Set Includes:* (1) - Magnetic Tough Case* (2) - 2" PH#2* (1) - 2" SQ#2* (1) - 1" SL#8* (4) - 1" PH#2* (2) - 1" PH#3* (1) - 1" SQ#1* (2)- 1" SQ#2* (1) - 1" T25* (1) - 1/4,5/16", & 3/8 Nutsetters* (1) - 1/8" & 1/4" Impact Drill Bits* (1) - Pivoting Magnetic Holder
DEWALT's 45-Piece Screwdriving Set DW2166 comes with the most commonly used driver bits and a driver guide sleeve with a built in magnet that keep bits in place and reduces wobble. The Tough Case container helps to protect it's contents and features a retention system that keeps the bits secure.
The DEWALT DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.* DEWALT brushless motor delivers up to 57% more run-time over brushed* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas* DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas* DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces* DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
This DEWALT Hammerdrill and Impact Driver Combo kit DCK299P2 features a DCD996 20V MAX XR 3-speed ½” hammerdrill that has 3-speed and was built for high performance (0-2250rpm), and features an all-metal transmission to optimize tool-to-task for fast application speeds and improved runtime. This tool can also be used for fast drilling in masonry materials while maintaining a compact size and lightweight design, measuring 8.4” front-to-back length and weighs 4.7 lbs, to fit into tight areas.The DCF887 20V MAX XR ¼” impact driver provides 1825 in-lbs if max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. This tool also features compact size and lightweight design, measuring 5.3” front-to-back length and weighing 3.4lbs.
DEWALT's DCK240C2 Impact Driver features:* DCD771 Features two speed transmission (0-450 / 0-1500 RPM)* DCD771 High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications* DCD771 Compact, lightweight design fits into tight areas* DCD771 1/2" single sleeve ratcheting chuck provides tight bit gripping strength* DCD771 Ergonomic handle delivers comfort and control* DCF885 Compact (5.55" front to back), lightweight (2.8 lbs) design fits into tight areas* DCF885 One-handed loading 1/4" hex chuck accepts 1" bit tips* DCF885 features 3 LED light ring withe 20 second delay to provide visibility without shadowsIncludes:* (1) DCD771 - 20V MAX* 1/2" Drill/Driver* (1) DCF885 - 1/4" Impact Driver* (2) 20V MAX Lithium Ion 1.3 Ah Battery Packs* (1) 20V MAX charger* (1) Contractor Bag
This value kit is ready for all your drilling, hammering, driving, and lighting needs. Included is a DCD795 - 20 Volt MAX XR lithium-ion brushless compact hammer drill/driver features a high speed transmission with two speed settings (0-600/0-2,000 RPM), a DCF886 – 20 Vold MAX XR lithium ion brushless compact impact driver, and a DCL040 – 20 Volt MAX lithium ion LED work light. All of these items come in a tough storage case which allows for easy transportation to and from the job site or storage in the garage.
DEWALT’s 20V MAX Lithium Ion Compact Drill/Driver Kit (DCD771C2) is remarkably compact and lightweight. This Drill/Driver features a heavy-duty ratcheting ½” chuck for optimal gripping on bits and accessories. The 20V Li-ion Batteries offer much longer run times, charge quicker, and have longer lives than traditional NiCd batteries - and they weigh so much less!The DCD780C2 also offers a dual-speed transmission, allowing for operating speed of 0-450 rpm and 0-1500 rpm for a wide range of fastening and drilling applications. It’s cherished by the contractor, applauded by the homeowner, and envied by the competition. Get yours today and step into the future.
This 20V MAX Premium 5-Tool Combo Kit (DCK592L2) comes fully loaded and ready to tackle any project you can dream up. A hammer Drill with a patented 3-speed all metal transmission and ½” all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention. The reciprocating saw has a 4-position keyless blade clamp which allows for quick and easy blade change. The impact driver features 3 LED Lights, and the circular saw features a 6-1/2” carbide blade that can cut 2 x 4’s at a 45 degree angle in a single pass. The LED work light delivers 110 lumens of light output, brightening a variety of work conditions.
The DCK299D1T1 features our DCD996 20V MAX* 1/2" 3-Speed Hammerdrill and DCF887 20V MAX* 1/4" 3-Speed Impact Driver. This kit comes with one 60V MAX* Flexvolt lithium ion battery, one 20V MAX* XR lithium ion compact battery and fast charger.This DEWALT FLEXVOLT 3-Speed Hammerdrill & Impact Driver Kit DCK299D1T1 features:* DCD996 20V MAX*1/2" hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time* DCD996 20V MAX*1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials* DCD996 20V MAX*1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lb) design to fit tight areas* DCD996 20V MAX* hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model* DCF887 20V MAX* 1/4" impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute* DCF887 20V MAX* 1/4" impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lbs) designIncludes:* (1) DCD996 20V MAX* XR 1/2" 3-Speed Hammerdrill* (1) DCF887 20V MAX* XR 1/4" Impact Driver* (1) DCB203 20V MAX* XR 2.0AH Lithium Ion Battery* (1) DCB606 20V / 60V MAX* Flexvolt 6.0AH/2.0AH Lithium Ion Battery* (1) DCB118 20V / 60V MAX* Fan-Cooled Rapid Charger* (2) Belt Hooks* (1) 360 Degree Side Handle* (1) Contractor Bag
Enjoy corded power without the cord with the DEWALT DCH273B 20V Max Brushless SDS 3 Mode 1" Rotary Hammer. The motor is brushless for extended runtime and durability while delivering 2.1 joules of impact energy. This hammer also includes DEWALT's SHOCKS Active Vibration Control™ to reduce the vibration that travels to your hands, allowing you to work longer, harder. At 6.8 pounds, it's light enough to work with all day, and it features a retractable utility hook for convenient storage.
3/32" 135 Split Point Cobalt DW1206* Maximum speed & life in stainless steel and other hard metals.* Pilot Point® tip design starts on contact and eliminates bit walking.* Industrial strength Cobalt for optimum life & durability in metal.
The DEWALT FLEXVOLT 60V Max* VSR Stud and Joist Drill with E-Clutch System features a 1/2" chuck and brushless motor that provides corded power in a cordless solution. Ideal for plumbers, electricians and HVAC installers who need to drill large diameter holes in wood. This drill provides exceptional power, control, durability, and runtime with its 60V brushless motor, E-Clutch System, mechanical clutch,and 2 variable-speed ranges. Equipped with the innovative bind-up control feature called E-Clutch System this drill increases user control in bind-up/stall situations by sensing a stall during use and managing torque accordingly.This DEWALT FLEXVOLT 60V MAX* VSR Stud and Joist Drill with E-Clutch System DCD460B features:* 60V Brushless Motor for increase power and runtime* Power of a cord with cordless freedom* Adjustable bail handle and 2-position side handle for leverage and control* 2 variable speed ranges (0-300 / 0-1250 rpm) to match appropriate speed to the application* E-Clutch is a Perform and Protect; feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.* Metal-gear housing for jobsite durability and increased reliability* The DEWALT; Perform and Protect; line of power tools is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance.Includes:* DCD460 Drill* Chuck Key and Holder* 2-Position Side Handle* Adjustable Bail Handle
DEWALT's DCD950B 1/2" 18V Cordless XRP™ Hammerdrill/Drill/Driver is a versatile tool that will come in handy for a number of applications while still delivering the strength and durability you expect from DEWALT products. Designed to work on wood, plywood, composites, plastic, metal, and even concrete, it weighs just 3.9 pounds making it a great choice for all-day use. It has three speeds each for bit rotation and hammer drilling, as well as an LED light to illuminate dark work spaces. This version comes with the tool only, allowing you to save money and use the batteries and chargers you already own.
DEWALT’s 14-piece industrial cobalt drill bit set delivers incredible performance and durability. Sure, it might cost a little more today, but you’ll save yourself plenty of money in the long term when these bits outlast the competition. They have a pilot point split tip design that starts on contact, eliminates bit walking, and produces precise holes. These cobalt bits excel at drilling into stainless steel, angle iron, I-beams, and other metals.
Tackle most of your drilling and driving needs with this DEWALT combo kit. It includes a brushless hammer drill and an impact driver, two 20V MAX high capacity lithium ion batteries, a fast charger, two belt hooks, a bit holder, and a convenient box for everything. The brushless motors deliver more than 50% longer run time compared to brushed motors, and the batteries offer about 60% more capacity than standard 20V MAX battery packs, which reduces your downtime and helps you get the job finished quicker.
Eliminate your downtime with this DEWALT 20V MAX XR Compact Drill/Driver Kit. With a brushless motor that delivers up to 57% more runtime over brushed models, two 2.0Ah battery packs, and a charger, you’ll be able to enjoy the convenience of wireless operation without the downtime. It has a compact (6.9” front to back) lightweight (3.4) design to allow you to work in tight spaces while keeping fatigue to a minimum. It also features a metal 1/2” ratcheting chuck for superior bit gripping strength and a bright 3-mode LED to provide lighting in dark or confined spaces.Kit includes DCD791 20V MAX XR Compact Drill/Driver, two 2.0Ah battery packs, charger, belt hook, and carrying case.
DEWALT’s 20V MAX Brushless Compact Hammerdrill is a versatile tool that lets you tackle drilling and hammering projects in a variety of materials. It’s equipped with a brushless motor to give you plenty of extra runtime when compared to brushed models, up to 57% more! It has a gauge that allows you to monitor your battery charge, and this kit comes with two 2.0Ah battery packs and a charger so that you don’t have to worry about downtime holding up the job. It’s built to be compact (7.5” front to back) and lightweight (3.6 pounds) to fit into tight areas and give you plenty of control over your work, and the 3-mode LED illuminates dark workspaces.Kit includes DCD 796 20V MAX Li-Ion Compact Hammerdrill, two 2.0 Ah battery packs, charger, carrying case, and belt hook.
Expand the capabilities of your drill and impact drivers with DEWALT's D180005 14 Piece Master Hole Saw Kit. It includes a number of saws that are convenient sizes for various plumbing, electrical, and door-lock installation projects. This kit includes 11 hole saws, small and large quick-change mandrels, and a replacement set that allows you to perform maintenance and get back to work quickly.
1/16" 135 Split Point Cobalt DW1204* Maximum speed & life in stainless steel and other hard metals.* Pilot Point® tip design starts on contact and eliminates bit walking.* Industrial strength Cobalt for optimum life & durability in metal.
18V performance in a 12V Drill/Driver! Welcome to the new wave of tool technology. Don’t be fooled by its size. This tough, 3/8” 12V MAX* Li-Ion Drill/Driver has what it takes, and then some, to take on even the most demanding of uses and keep on going. Traditional 18V drills are still great tools, but they are heavy and bulky. Try hooking one of those on your belt, then climbing a ladder. Forget it. This little powerhouse comes with a belt hook, so you know you can carry it hands-free to the project, freeing you up to hold that ceiling fan to be installed. * Compact, lightweight design fits into tight areas.* Two speed transmission for optimal speed and torque control.* LED light provides visibility in dark areas.* Belt hook included for portability.
16 Piece Pilot Point® Drill Bit Set DW1956* Pilot Point® Tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough.* No-Spin Shank eliminates the frustration of bit spinning in the chuck.* Tapered web provides greater durability to reduce breaking.* Size markings are located above the shank to prevent wearing away.* Pilot Point® starts on contact
Sometimes you find yourself in a jam. Here’s your way out: The DCD740B. It’s a job-saver. It’s a 3/8” Right Angle Drill/Driver powered by DEWALT’s 20V MAX* Lithium Ion Batteries. With a tool length of only 4” front to back, you’ll go where no standard drill/driver could ever go, and with variable speed settings of 0-650 rpm & 0-2000 rpm you’ll be able to use it for a variety of tasks, like boring holes in cramped joist spaces or tightening screws inside that engine compartment. The paddle trigger makes for a comfortable and convenient approach, and the right angle design allows for versatile operation styles. You’ll find yourself using this one for more and more projects, not only because it’s convenient, but also because it’s great to switch up your grip!* Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications.* Compact front to back length (4.0") allowing users to fit into hard to reach spaces.* Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger.* 3/8" Ratcheting Chuck with Deep Hex Pocket allows 2" (50 mm) hex bit to be fully inserted for getting into tight spaces.