The DEWALT DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.* DEWALT brushless motor delivers up to 57% more run-time over brushed* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas* DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas* DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces* DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
DEWALT's 20V MAX Compact Brushless Drill/Driver and Impact Kit DCK277C2 features:* DEWALT brushless motor delivers up to 57% more run time over brushed* Compact (5.4" front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas* Compact (7.52" front to back), lightweight Drill/Driver design fits into tight areas* Ergonomic comfort grip handle provides ideal balance and tool control* LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces* Impact driver's one-handed loading 1/4" hex chuck accepts 1" bit tipsIncludes:* (1) DCD777 20V MAX* Compact Brushless Drill/Driver* (1) DCF787 20V MAX* Compact Brushless 1/4" Impact Driver* (2) 20V MAX* Li-Ion Battery Packs* (1) Charger* (1) Kit Bag
This DEWALT Hammerdrill and Impact Driver Combo kit DCK299P2 features a DCD996 20V MAX XR 3-speed ½” hammerdrill that has 3-speed and was built for high performance (0-2250rpm), and features an all-metal transmission to optimize tool-to-task for fast application speeds and improved runtime. This tool can also be used for fast drilling in masonry materials while maintaining a compact size and lightweight design, measuring 8.4” front-to-back length and weighs 4.7 lbs, to fit into tight areas.The DCF887 20V MAX XR ¼” impact driver provides 1825 in-lbs if max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. This tool also features compact size and lightweight design, measuring 5.3” front-to-back length and weighing 3.4lbs.
12V MAX* 3/8" Impact Wrench Kit DCF813S2* Compact, lightweight design fits into tight areas.* 3 LED Lights provide visibility without shadows.* 3/8" Hog ring anvil;* Fast socket changing.* 1150 in/lbs of torque;* Power for tightening and loosening.
The Big Deal. You’ve got big jobs. You’ve got big responsibilities. You need tools that can deliver Big, and you need a bunch of ‘em. Luckily, Murdoch’s has the big-time Combo Kit that brings the goods: The DCK490L2. It’s a 20V MAX* 3.0Ah (the big boys!) Li-Ion 4-Tool Combo. You get the 20V MAX* ½” Hammerdrill / Drill/Driver, the Recip Saw, the ¼” Impact Driver, and the 20V MAX* LED Work Light. It’s perfect for the professional contractor – you’ll use it everyday - and ideal for the property owner who needs a tool system they trust when heavy-demand projects come up, and they do. And since you’re getting big savings by going with the DEWALT Combo Kit from murdochs.com, you can treat yourself to those Carhartt's – they come in all sizes, even big.* DCD985 20V MAX* hammerdrill with patented 3-speed all-metal transmission and 1/2" all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention.* DCS381 20V MAX* reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft.* DCF885 20V MAX* 1/4" impact driver features 3 LED lights with 20 second delay to provide visibility without shadows.* DCL040 20V MAX* LED work light delivers 110 lumens of light output.
12V MAX* 1/4" Impact Driver Kit DCF815S2* Compact, lightweight design fits into tight areas.* 3 LED Lights provide visibility without shadows.* One-handed loading 1/4" hex chuck accepts 1" bit tips.* Belt hook included for portability.
Impact Driver Ready Accessories: Sets DW2149* Includes Best In Class most common Impact Driver Accessories* Includes new Patented PIVOT HOLDER - Drive Straight or in Pivot Mode* Some sets include Impact Driver Deep Sockets* Some sets include One-piece Design Drill Bits
DEWALT's DCK240C2 Impact Driver features:* DCD771 Features two speed transmission (0-450 / 0-1500 RPM)* DCD771 High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications* DCD771 Compact, lightweight design fits into tight areas* DCD771 1/2" single sleeve ratcheting chuck provides tight bit gripping strength* DCD771 Ergonomic handle delivers comfort and control* DCF885 Compact (5.55" front to back), lightweight (2.8 lbs) design fits into tight areas* DCF885 One-handed loading 1/4" hex chuck accepts 1" bit tips* DCF885 features 3 LED light ring withe 20 second delay to provide visibility without shadowsIncludes:* (1) DCD771 - 20V MAX* 1/2" Drill/Driver* (1) DCF885 - 1/4" Impact Driver* (2) 20V MAX Lithium Ion 1.3 Ah Battery Packs* (1) 20V MAX charger* (1) Contractor Bag
OK, so you’ve already picked up the ½” 18V Cordless Impact Wrench Kit that came with two Batteries and now you just want to get the 3/8” tool for more variety. Good call. Here’s why: The DC823B features up to 1,500 in-lbs of torque and speeds at 0-2,400 rpm/0-2,700 ipm to get all kinds of projects done and done with this great gun. It’s lightweight and compact, meaning you can work with it in tight situations without fatigue. The heavy-duty impacting mechanism delivers torque directly to the hardware, rather than kicking back at you, so you’ll see increased productivity, as well as comfort. It’s truly the type of tool that makes you happy when you get to use it. * Frameless motor for extended tool durability and life.* Compact size and weight allow access into tighter areas and reduces user fatigue.* 1,500 in-lbs of torque to perform a wide range of fastening applications.* 0-2,400 rpm/0-2,700 ipm for faster application speed.* Replaceable brushes for increased serviceability.* Textured anti-slip comfort grip provides maximum comfort.* Durable magnesium gear case and all metal transmission for extended durability.* Heavy-duty impacting mechanism directs torque to fastener without kickback.
Heavy Metal? Heavy Equipment? Heavy Hardware? Heavy Workload?Here’s Heavy-Duty: The DW292 ½” Impact Wrench with Detent Pin Anvil. It’s built for professionals who need a tool with some meat on its bones. This power hitter packs a wallop with 345fFt-lbs of torque and 2,700 BPM – it means business. When it comes to large-scale construction, steel work, heavy equipment and farm implement repair, nothing compares to the DEWALT DW292. When it comes to getting quality, great savings and satisfaction, nothing compares to murdochs.com. We’ll help with the heavy lifting.* 345 ft-lbs of deliverable torque in forward and reverse.* 1/2" detent pin anvil.* AC/DC forward/reverse rocking switch.* Soft grip handle for increased comfort.* Ball bearing construction for increased durability.
Maximize your DEWALT power tool system with this 2” MaxFit screwdriving bit. It’s ideal for use in impact drivers and drills/drivers, and it features the 10x magnetic screw lock system to minimize drops and wobbling, allowing you to get the job done quicker and with greater accuracy. It also has a reflex core that allows the bit to flex up to 15 degrees to reduce breakage.
The DCF883B has power and performance you need in an impact wrench. It’s perfect for the garage, farm, and shop and works with any DEWALT 20V Max Lithium Ion Battery. With three LED lights you can always see where you are working.* Compact (5.70" front to back), lightweight (3.4 lbs) design fits into tight areas* Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows* Hog ring anvil to easily change sockets* Textured anti-slip comfort grip provides maximum comfort and control
3/8" - 1-7/8" Magnetic Nut Driver DW2220IR* Product designed for use in Impact Drivers and Wrenches.* Recessed Corners = Drives on flats which minimizes shavings.* Industrial strength magnet maximizes fastener retention.* Pivoting product pivots up to 20 degrees allowing one to get into tight spaces or corners.
This DEWALT 20V MAX 1/4” Cordless Impact Driver has a compact 5.5” design that allows you to use it just about anywhere. It has trigger-activated LED lights to illuminate dark, cramped work areas, and the lightweight 2.8-pound design allows you to comfortably use it for hours at a time. It features a powerful DEWALT brushless motor that can produce up to 3200 IPM and 117 ft. lbs. of torque. This edition of the driver ships without batteries and chargers, allowing you to economically add to your collection of tools while using your existing DEWALT 20V MAX battery packs.
20V MAX* Lithium Ion 1/2" Impact Wrench (Tool Only) DCF889B* 400 ft-lbs of maximum torque to perform a wide range of heavy-duty fastening applications* Ergonomic handle provides user superior comfort and control* Variable speed trigger with electric brake provides user improved control* LED light provides user greater visibility when working in dark environments* Durable magnesium gear case and all metal transmission for extended durability
Power through any task with DEWALT’s DCF889 – 20v MAX XR Brushless High Torque ½” Impact Wrench. With up to 700 ft lbs of max torque and 1200 ft-lbs of max breakaway torque, this tool has enough power to make any chore easy. Multi-speed functionality puts the control in your hands for use on a variety of different projects. An added LED light increases visibility in dark spaces, so you can be confident in the work you are doing, every time.
1" (25mm) Impact Ready Hole Saw D180016IR* Fast Metal Drilling Speeds for Optimized tooth design.* Easy Plug Removal for Ejection Spring.* Raised Shoulder Helps to prevent the drill from breaking through the material when hole is complete.* Thin-walled design Optimum metal drilling efficiency.
This 20V MAX Premium 5-Tool Combo Kit (DCK592L2) comes fully loaded and ready to tackle any project you can dream up. A hammer Drill with a patented 3-speed all metal transmission and ½” all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention. The reciprocating saw has a 4-position keyless blade clamp which allows for quick and easy blade change. The impact driver features 3 LED Lights, and the circular saw features a 6-1/2” carbide blade that can cut 2 x 4’s at a 45 degree angle in a single pass. The LED work light delivers 110 lumens of light output, brightening a variety of work conditions.
65 Piece Impact Ready Accessory Set DW2583* Includes Best In Class most common Impact Driver Accessories.* Includes new Patented PIVOT HOLDER - Drive Straight or in Pivot Mode.* Some sets include Impact Driver Deep Sockets.* Some sets include One-piece Design Drill Bits.
The DCK299D1T1 features our DCD996 20V MAX* 1/2" 3-Speed Hammerdrill and DCF887 20V MAX* 1/4" 3-Speed Impact Driver. This kit comes with one 60V MAX* Flexvolt lithium ion battery, one 20V MAX* XR lithium ion compact battery and fast charger.This DEWALT FLEXVOLT 3-Speed Hammerdrill & Impact Driver Kit DCK299D1T1 features:* DCD996 20V MAX*1/2" hammerdrill 3-speed, high performance (0-2,000 rpm), all-metal transmission optimizes tool-to-task for fast application speeds and improved run-time* DCD996 20V MAX*1/2" hammerdrill 0-38,250 BPM for fast drilling in masonry materials* DCD996 20V MAX*1/2" hammerdrill has a compact size (8.4" front-to-back length) and lightweight (4.7 lb) design to fit tight areas* DCD996 20V MAX* hammerdrill includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model* DCF887 20V MAX* 1/4" impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute* DCF887 20V MAX* 1/4" impact driver has a compact size (5.3" front-to-back length) and lightweight (3.4 lbs) designIncludes:* (1) DCD996 20V MAX* XR 1/2" 3-Speed Hammerdrill* (1) DCF887 20V MAX* XR 1/4" Impact Driver* (1) DCB203 20V MAX* XR 2.0AH Lithium Ion Battery* (1) DCB606 20V / 60V MAX* Flexvolt 6.0AH/2.0AH Lithium Ion Battery* (1) DCB118 20V / 60V MAX* Fan-Cooled Rapid Charger* (2) Belt Hooks* (1) 360 Degree Side Handle* (1) Contractor Bag
Eliminate your downtime while still enjoying the convenience of cordless with this DEWALT 20V XR Brushless 1/4” 3 Speed Impact Driver Kit. The efficient brushless motor offers plenty of run time, and this kit includes two 20V MAX XR batteries and a fast charger so that you’ll always have some juice. The 3 speed settings allow you to optimize for the job at hand, and there are 3 built-in trigger-activated LED lights to illuminate your work area, even if you’re working in dark nooks and crannies.Kit includes 1 DCF887 Brushless Impact Driver, 2 DCB203 2.0 Ah 20V MAX XR batteries, charger, belt clip, and carrying case.
9 Piece Electrician's Hole Saw Kit D180002* Door lock kit utilizes C-clamp design with tool-free clamping and no surface damage.* Door lock kit utilizes alignment window and taller bushings to deliver accurate height placement and straight drilling.* Door lock kit includes two adjustable bushings which accept both standard backsets and both common door thicknesses.
The 20 V Max DCF880B Lithium Ion ½” Impact Wrench has the speed and power you need to easily get that bolt tight. It’s compact, tough, and easy-to-grip design will make it your favorite tool in the auto shop. Comes with three LED lights, so you can always see where you are working.* Compact (5.70" front to back), lightweight (3.4 lbs) design fits into tight areas* Three (3) LED lights with 20 second delay after trigger release, provide visibility without shadows* Textured anti-slip comfort grip provides maximum comfort and control.* Battery not included