Make reloading your guns easy with the Hornady® GS-1500 Grain electronic scale. The 1500 grain capacity makes it able to handle any reloading task up to the 50 BMG. Precise measurements are guaranteed, and the scale provides an immediate reading. This scale's sleek, compact design will take up minimal space on your reloading bench.
RCBS' new M1000 mechanical scale gives users 1,000-grain capacity with +/- 0.1-grain accuracy, plus right or left-handed operation. It offers magnetic damping for fast readings and maintenance-free movement. A metal tip-proof pan makes loading easy. Limited lifetime warranty.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
RCBS' Quick Change Powder Measure can quickly go from light pistol to magnum rifle charges. The hopper hold 1 pound of smokeless powder. The unit features metering assemblies that change out with the pull of a pin. Extra metering assemblies can be purchased to have them preset for favorite smokeless powder charges. The drain attachment empties the powder hopper without the need to remove it from the stand or press. Note: The Powder Measure should be used in conjunction with an accurate powder scale for setting the original charge and for checking charges occasionally during the run.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
With a capacity of 1500 grains, this Hornady® Lock-N-Load® bench scale helps you weigh powder, bullets, cases, cartridges, and more with the utmost precision. The large LCD display is easy to read and displays precisely to 0.1 of a grain. This bench scale includes two calibration weights, AC adaptor, 220V adaptor, and metal powder pan.
Used to trickle that last few tenths of a grain of powder into a dropped and weighed charge for “0” variation. Hornady's Powder Tickler has a wide, stable base, is easy to clean, and uses a small amount of powder to fill.
Get back to the range faster when you use the Hornady® Lock-N-Load® Auto Charge™ powder dispenser, an easy-to-use and highly accurate system for measuring powder. This unit offers precision to within 0.1 grains, and has a scale capacity of 1000 grains. Offering both automatic and manual dispensing, three speed settings, and a trickle function, this powder dispenser may be the most competitive in the industry.
Offering a versatile operation and the widest range of any powder measure on the market, the Hornady® Lock-N-Load® powder measure measures from .5-.265 grains, and works for small pistol cartridges, magnum rifle cartridges, and everything in between. Includes a standard rotor and metering insert, and additional inserts may be purchased and swapped out with a simple push-button mechanism. The multiple mounting options help you move this powder measure from your bench to the Hornady® fast load powder measure stand, or Lock-N-Load® AP™ for automatic measuring.
RCBS' Replacement Trimmer Cutter Head is a high-quality replacement cutter that is designed for use with RCBS Trim Pro case trimmers.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
RCBS' Quick Change Powder Funnel eliminatesthe problemof powder funnels not fitting properly over the cases.The Quick Change Powder Funnel features adapters that are supported by the body of the case and allow reloaders to choose the optimum powder flow. The 4-inch drop tube helps get that compressed powder charge into the case. The drop tubes are stackable so reloaders can increase the drop length if necessary. With the adapters removed, the powder funnel allows reloaders to return powder into the original container quickly.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
RCBS' Advanced Powder Measure Stand will raise most Powder Measures 9-1/2 inches (with a standard 7/8"-14 thread), leaving plenty of space for positioning a powder scale pan or cases in a loading block under the drop tube. The stand bolts easily to a reloading bench or table. It also serves as a stand for holding a Piggyback II, Piggyback-3 or -4 when not in use. Note: Not for use with Little Dandy Powder Measure.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
Most reloaders now use electronic scales to measure powder charges, but many of these scales have pans that are positioned out of reach of existing powder tricklers. RCBS' Powder Trickler-2 solves this problem by adding a height adjustable, non-skid base and powder tube extension.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
If you prefer a traditional analog scale for powder measurement, the Hornady® Lock-N-Load® balance beam scale is a precise and easy-to-use option. The high tolerance scale is consistent to within .1 of a grain, adjusts easily, and has an easy-to-read laser etched beam.
The RCBS Scale Pan Powder Funnel features an integrated powder funnel that allows reloaders to pour powder directly into the case. The pan is designed for use with electronic scales and powder dispensers.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.
This Hornady® anti-static plastic funnel fits all calibers between 22 and 45, and has a squared design that won't roll off your reloading table. An essential tool for filling weighed charges, checking weights, and returning powder to the case.
For handloaders who want “hands-on” accurate control of their powder charges, the Lock-N-Load Quick Trickle provides an excellent way to deliver an initial large volume powder charge with the ability to finish with small precision metering for perfection. This versatile powder trickler features hand operated high and low speeds with up to a three-to-one gear ratio. Combined with double-sided, sealed ball bearings that prevent stray powder from impeding operation, the Quick Trickle is the smoothest operating powder dispensing tool for your reloading bench.
Uniform loads require consistent powder charges, and many handloaders find a baffle helps them throw more consistent charges. This baffle is specifically designed for RCBS powder measures and provides handloaders a uniform powder flow by controlling the gravity feed pressure of the powder column on the metering unit.WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects, or other reproductive harm.