Stop rust in its tracks with Rust-Oleum Stops Rust Rust Reformer Spray. A layer of this flat-black coating bonds with rusty metal and instantly transforms it into a non-rusting surface. No need to sand down to bare metal, simply spray directly onto rust.For best results, apply several light coats a few minutes apart to prevent running and sagging.
Rust-Oleum Auto Specialty Peel Coat Spray Paint is a peelable rubber coating that enables endless customization for vehicles. This premium formula is easy to peel, safe to wash and can be applied to metal, plastic, chrome, glass and more. The all-weather coating also protects against rust and road debris. Recommended removal within 6 months.BEST PRACTICES WHEN APPLYING PEEL COAT:* Wash vehicles thoroughly and ensure you’ve removed any wax or grease from the surface.* Make sure the surface is completely dry before applying Peel Coat.* Cover and mask off any areas that should not be painted with tape, plastic sheeting, etc.* Hold the spray can 8-10” from the surface and spray slowly and steadily.* Target 50% coverage on the first coat and apply four or more coats for complete coverage. The more coats, the easier the paint is to remove.* Allow each coat to dry to a finish. This should take about 5-10 minutes between coats.* Begin removing tape and other masking immediately after the last coat has been applied to keep clean edges. If you wait too long, the coating may adhere too much to the tape.* Let Peel Coat set for at least one hour before touching or driving the vehicle, wait at least 24 hours before washing.* To peel the coating off, slowly rub along one edge until it begins to peel back and work slowly from the edges.* For best results, remove Peel Coat within 6 months.
Rust-Oleum's Stops Rust protective enamel spray paint provides long-lasting protection against corrosion, and restores brilliance to aluminum, brass, and copper. The semi-gloss finish formula has superior elasticity that stands up to the stress of changing conditions with less peeling, cracking, and chipping.For best results on heavily rusted surfaces, apply Rust-Oleum Stops Rust Rusty Metal Primer (sold separate).
Rust-Oleum Specialty Chalk Board Spray Paint converts surfaces into a usable chalkboard. Apply to metal, wood, plastic, hardboard, glass or paperboard. Erases cleanly.For best results, allow paint to dry for 24 hours. Prepare surface by rubbing side of chalk on entire surface and erase.
Defend against corrosion and tarnish with Rust-Oleum Crystal Clear enamel spray paint. This glossy-finish formula is ideal for use on aluminum, brass, and copper; the durable clear coating resists chipping and restores original gloss and color.For best results, apply multiple light coats versus one heavy coat.
Rust-Oleum Tub & Tile Aerosol Spray Paint provides a one-step solution to refinish tubs, sinks and showers in just minutes. This unique finish bonds to porcelain and ceramic providing outstanding adhesion, durability and color retention in high moisture areas.For best results, properly prepare surface following the series of steps on packaging.
Rust-Oleum Specialty Appliance Epoxy is an ultra-hard, moisture resistance enamel that is specifically formulated for indoor metal surfaces. It provides a smooth, washable surface for refinishing the exterior of appliances such as refrigerators, dishwashers, laundry machines, and other indoor metal applications (cabinets, tables). Do not use on objects exposed to heat (stovetops, oven interiors, etc)For best results, spray on 2-3 light coats a few minutes apart; no primer needed.
Easily create a baked-glaze finish without the heat with Rust-Oleum Specialty Triple Thick Glaze Spray Coating. This crystal-clear, extra-thick aerosol creates a glass-like coating that is both decorative and protective.For best results, apply two or more light coats a few minutes apart.
Rust-Oleum Primer Sealer Spray Paint helps bond base coats to the surface to achieve a uniform and smooth final finish. When applied over a Rust-Oleum Automotive Primer this product also prevents top coat paint from soaking into the primed surface.For best results, apply two coats (allow product to dry for 1-2 minutes between coats).
Rust-Oleum Metal Coat Spray Paint generates a high gloss anodized look that can be used on both interior and exterior metal surfaces.For best appearance, apply 2 light coats, followed by 1 medium wet coat. Apply all coats within 1 hour, and wait 10 minutes between application of each coat.
Great for marking, color-coding, or wherever high visibility is needed, this Rust-Oleum fluorescent spray paint is great for use on sporting goods, arts and crafts, and hunting season. The quick-dry formula and flat matte finish make this spray paint ideal for a variety of applications.For best results, undercoat with flat white paint to maximize neon effect.
Glitter offers an intense sparkling finish for any craft or decorative project. Glitter also provides a full coverage of radiant shimmer for many surfaces including: wood, metal, wicker, glass, ceramic, pottery, craft foam, paper, plastic and more. For added protection, top coat with the Rust-Oleum Glitter Clear Sealer. For use on interior items only.For best results, hold can upright 12-14” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke.
Rust-Oleum NeverWet is a two-step product system designed to create a moisture repelling barrier on a variety of surfaces. It is suitable for use on metal, wood, aluminum, galvanized metal, PVC, concrete, masonry, asphalt, vinyl siding, fiberglass, canvas, most plastics and more.
Acting as a barrier from rust and abrasion, Rust-Oleum Truck Bed coating spray provides a durable, non-skid finish that protects both metal and painted surfaces. Commonly used on truck beds, this multi-purpose coating is convenient for application on small surfaces or areas with tight, curved contours that are difficult to brush. It also works great when used as a touch-up spray for existing coated truck beds.For best results, apply two coats (allow to dry 1-2 minutes between coats).