Smaller, portable air compressors are great and have tons of uses, but sometimes you need more. A lot more. Pneumatic impact wrenches, sanders, and sprayers need much more air, and this one delivers. The D55168 is an incredible compressor and is available at an incredible price. Get that workshop or garage up and running for real with a compressor that can reach 200 PSI and hold 15 gallons of usable air, and recharges in a snap with its 1.6 HP pump, delivering 5.0 SCFM @ 90 PSI. No more standing around waiting for the compressor to catch up! With DEWALT’s EHP® - Efficient High Pressure – Technology, you’ll get maximum air-tool run times, and at 78 dBA when filling, you won’t have to shout over it! And even though it’s bigger, you can still maneuver/transport this powerhouse with ease, as it has a compact design, semi-pneumatic tires, and a sturdy handle system. So, if size matters in your shop, go optimal. Go with the D55168.* 5.0 SCFM @ 90 PSI allows for quick compressor recovery times.* 200 PSI max tank storage pressure allows for longer air tool run times.* 78 dBA (tested per ISO3744) operational noise level for a quieter work environment.* EHP® Efficient high pressure technology delivers exceptional air-tool runtimes.* Oil free, maintenance free pump for convenient use.* Efficient high pressure motor allows the compressor to be run with an extension cord (12 Ga. or heavier, 50 ft. or less) due to consistent amp draw requirements of the compressor.* Compact design allows for the compressor to be easily moved, transported, and stored.* Robust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap.* Metal console panel protects the gauges, coupler, and regulator.* High flow air regulator allows for maximum air tool run time.
The Ingersoll Rand STK SSL3 is a durable, efficient air compressor that’s a good fit for a number of different kinds of operations, from consumer to shop to jobsite. It runs on a 3-horsepower electric motor that makes for quiet operation, and it also means it can be installed in enclosed spaces where gas power might be too noisy or not safe enough. It provides 135 PSI, enough for homeowner use to contractor use, and everything in between. In just about any environment, the SSL3 can reduce the amount of time you spend on a job.
Designed for both professionals and do-it-yourselfers alike, this versatile Garage Mate air compressor is the perfect addition to any shop or garage. It comes equipped with a pressure switch, pressure gauge, regulator, safety valve, manual drain and a 6 foot powercord. Easy to use, this compressor makes any task you undertake a breeze because of its ability to power a wide variety of tools.
This DEWALT heavy-duty 165 PSI pancake compressor strikes the perfect balance between power and portability, offering longer tool runtime with a quicker recovery. The six gallon (22.7 liter) tank is larger than those of similar-sized compressors, to help you get more done.The high-efficiency motor offers easy start up in cold weather, and the 75.5 dBA noise level creates a quieter work environment. Two universal couplers will support two tools simultaneously, and the 30 pound, portable design makes it easy to move around the jobsite or shop. Permanently lubricated bearings cut down on maintenance, and the high flow regulator and couplers maximize air tool performance.
This Magna Force 60 gallon cast iron, oil lubricated, belt drive air compressor is great for all of your projects around the shop. Its large capacity, 60 gallon American Society of Mechanical Engineers (ASME) air receiver provides more air for longer run times on air tools such as ratchets, impacts, spray guns, hammers, etc. It is equipped with quick-set regulator, tank and tool pressure gauges, quick connect air outlet and on/off switch. CSA,UL Certified.
This two-stage reciprocating compressor from Ingersoll Rand is designed to provide continuous power in a shop or industrial environment. It features double cast iron construction and precision-engineered components for added reliability, and the individually cast cylinders, overhung crankshaft, and one piece connecting rod make for easier maintenance and service.
DEWALT'S FLEXVOLT 60V MAX 2.5 Gallon Cordless Air Compressor offers all of the convenience and portability of cordless, and lets you continue using the pneumatic tools you already have. Each battery charge allows for up to 1,220 nails, providing the runtime to complete a variety of applications. Its OneTurn Regulator means you no longer have to fight with the dial.
This 20 gallon air compressor is great for all of your projects around the house such as light to heavy duty nailing as well as medium duty automotive tasks with pneumatic air tools and all of your inflation needs. Equipped with quick-set regulator, tank and tool pressure gauges, quick connect air outlet and on/off switch. CSA,UL Certified.
This Industrial Air 60 gallon, super high flow cast iron 230V electric single stage FATBOY air compressor is great for your everyday shop needs. This model has a low profile air receiver ensuring the weight is more evenly distributed making this unit less top heavy than traditional vertical compressors. It also comes with a thermal overload protection system motor (TOPS) for added protection.
This 7.5 horsepower Ingersoll Rand air compressor is designed for continuous-duty operation, which along with its heavy-duty construction makes it a perfect option for almost any sort of shop environment. It pumps out a maximum air output of 175 PSI while operating with surprising quietness and with minimal vibration. It features high-efficiency stainless steel valves and industrial bearings to deliver extended pump life, a high-efficiency intercooler, and a high-efficiency inlet air filter with sound attenuation baffles.
Make tire inflation a painless task with the Viair 85P portable compressor, a conveniently sized unit that goes with you anywhere in a deluxe carry bag and plugs right into your cigarette lighter power port (15 amps max). Designed to inflate up to 31” tires, this compressor allows you to easily monitor the pressure with the built-in gauge.Parts include a 120 PSI pressure gauge; LED work light/power indicator; solid brass twist-on tire chuck; accessory power plug; three-piece inflation tips kit; 10’ power cord; and 3’ air hose.
The Industrial Air Contractor 9 gallon compressor is the perfect tool for any work site or shop. A Honda engine gives this unit the power and reliability you need for optimum tool performance, while the twin ‘wheelbarrow’ tank design with 2 center mount turf tread semi-pnuematic tires makes this unit easy to move around your jobsite.
Industrial Air Contractor's 8 gallon Honda powered cast iron oil lubricated air compressor is a great option if you are looking for a mobile air compressor. The twin "wheelbarrow" tank design has a center mount turf tread semi-pneumatic tire for greatest mobility. With a max 155 PSI it has the right capacity for optimum tool performance.
Simplify your life with the Viair constant duty onboard air system, a pre-packaged compressed air solution that includes everything you need to install a complete pneumatic system on your vehicle. Fill your tires up on the go without putting undue stress on your vehicle’s system. This kit includes a 100 percentduty cycle 450C compressor, 2.5 gallon air tank, easy-to-follow instructions, and all components needed to install your onboard air system.Other parts include a dash panel gauge with an ON/OFF switch; pressure switch with relay (110 PSI on, 145 PSI off); reducer (1/8” female to 1/4” male); female 1/4” quick connect stud; female 1/4” quick connect coupler; 1/4" 175 PSI safety valve; 1/4” drain cock; three (3) 1/4” compression fittings; 20’ 12-gauge wire with inline fuser holder; 4” strip of continuous grommet material; accessory airline; and electrical connections.
This Multi-Piece Pneumatic kit is packed with the most popular accessories for your air compressor, so no matter what the job demands, you have the part you need to get the job done. Included is a 1/4"x 25' PE coil hose, (2) 1/4" female couplers, (2) 1/4" female NPT plugs, (3) 1/4" male NPT plugs, Blow gun, dual head chuck, tire gauge, ball chuck, 1/4" NPT male connector, 1/4" NPT female connector, 4" blow gun nozzle, tapered inflation needle, (2) pin inflation needles, safety nozzle, thread tape, rubber blow gun nozzle, and blow gun adapter.
This Ingersoll Rand gas air compressor is relatively lightweight and features a low-profile design to make moving it around on the jobsite even easier. It’s designed for tough, all-day use, and it features enough power to drive 4 framing guns at the same time. It’s powered by a reliable Honda engine, and the cast iron construction ensures that your investment will last for years to come.
DeWALT’s 60 gallon Two-Stage Cast-Iron Air Compressor DXCMV5076055 features industrial performance and delivers maximum CFM @ 175 PSI which provides enough power to operate more than one air tool or device at a time. The patented pump design provides a cooler running pump while the electric motor features thermal overload protection for safety and longevity of this compressor. A wire form belt guard improves compressor cooling so the last thing you have to worry about while working is your equipment failing.
A favorite of off-road enthusiasts, the Viair 400P portable compressor is a larger kit that inflates up to 35” tires in less than five minutes. Enjoy peace of mind when you’re miles from civilization, as this portable compressor comes with a deluxe carry bag that stows neatly in your cargo box.This kit includes a five-in-one inflator deflator with inline 100 PSI pressure gauge; vibration resistant diamond-plated sand tray; deluxe dual compartment carry bag; 40-amp inline fuse holder; dual battery clamps; three-piece inflation tips kit; 8’ power cord; and 25’ coiled air hose.
Industrial Air's 30 gallon Air Compressor is a great truck mount style tank. The 9HP Honda OHV gas engine with an electric start and a high flow single stage provides 18 CFM at 90 PSI. Made out of cast iron with 3 cylinder pump, this unit was built for durability and longevity.
* 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI enables large amount of nails to be fired and provides quick recovery* Durable oil free pump provides extended maintenance-free operation* Low 71.5* dBA allows for quieter operation (*Tested per ISO3744)* Low 12 amp draw motor provides easy start-up and reduces breaker tripping* Lightweight (36 lbs), thin (12.5") and compact design is easy to carry and store* Compressor can be operated/stored in either the vertical or horizontal position* Roll cage and control panel provide protection to key compressor components* Dual quick couplers to easily support 2 nailers* Ball valve drain allows for quick and thorough tank draining* Convenient cord wrap for easy storage* High-flow regulator for increased performance
You’ve got jobs to do. Big jobs. Jobs that call for more: more speed, more productivity, and more out of your air compressor, like more PSI, more gallons of usable air, and more horsepower to fill the tank and allow for quick recovery while on the job. You need the D55146. It has a 1.6 HP motor and at 4.5 gallons and 200 PSI it holds 80% more usable air than the competition. Though it has a ton of capacity, it’s easily transportable to and from the jobsite with 10” non-flat foam tires, and stores nicely with upright stand option and retractable handle when not in use. When continuous use is what you need, and plenty of power is what your tools demand, get the compressor that can keep up: DEWALT’s D55146.* 200 PSI max tank storage pressure provides a user with 80% more usable air than the industry leader.* 5.0 SCFM @ 90 PSI allows the compressor to recover quickly after its initial tank charge is exhausted.* Vertical stand feature and collapsible handle allows a user to save space by transporting or storing the compressor in a vertical position.* 78 dBA* operational noise level for a quieter work environment (* tested per ISO3477).* 10" non-flat foam tires allow for easy transportation around the jobsite.* EHP® Efficient high pressure technology allows for longer pump and motor life.* Oil free, maintenance free pump for convenient use.* Efficient high pressure motor allows the compressor to be run with an extension cord (12 Ga. or heavier, 50 ft. or less) due to consistent amp draw requirement of the compressor.* High flow coupler allows for maximum nailer performance.* Metal console panel provides a display area as well as protects the gauges, couplers, and regulator.
This DeWalt's 1.9 HP 8 gallon cast iron oil lubricated electric wheelbarrow air compressor is a great mobile option to meet your air compressor needs. Equipped with a heavy duty dual voltage induction motor, a cast iron twin cylinder pump, dual control valves, a high flow regulator, and a center mount flat-free tire, this versatile unit is perfect for going from home to the jobsite with ease.