Packed for everything a workshop needs, this 20V MAX Compact 9-piece Combo Kit DCK940D2 is a complete set of hardworking tools. This set contains: a DCD771 Compact ½” Drill, DCS381 20V Max reciprocating saw, DCF885 20V MAX 1/4" impact driver, DCS393 20V Max circular saw, DCL040 20V MAX LED work light, DCS355 20V MAX XR Oscillating Multi-Tool, DCR006 12V/20V MAX Cordless Lithium-Ion Bluetooth Speaker, DCG412B Cordless 20V Cut Off Grinder, DCD740 20V MAX lithium ion 3/8-inch right angle drill/driver, and a (2) 20V Max lithium ion 2.0 Ah battery packs and fast charger. There is no project too large or small for this handy kit to tackle.
DEWALT's XR 5.0Ah Lithium Ion 2-Pack Battery/Charger Kit provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200). These 5.0 Ah Lithium Ion batteries are lightweight at 1.4 lbs each and compatible with the entire line of 20V MAX tools. It's a 5.0Ah high capacity battery pack that has no memory and virtually no self-discharge for maximum productivity and less downtime. It offers a 3-LED fuel gauge system that allows immediate feedback on state of charge.
Invest in a power tool combo kit that will get the job done! This DEWALT 20V MAX* XR Lithium Ion Brushless 4-Tool Combo Kit DCK494P2 includes 4 power tools, two 20V MAX* XR Lithium Ion Batteries (5.0AH), a charger, and contractor's bag.Tools included:DCD996 - 20V MAX* XR Lithium Ion 1/2" Premium 3-Speed Hammerdrill:* Up to 75% more runtime with brushless motor vs. 18v NiCad brushed motor* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* Heavy-duty 1/2" ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength* 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model* LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spacesDCS367 - 20V MAX XR Brushless Reciprocating Saw:* Up to 2.5X more runtime* Bright LED to illuminate dark work areas* Keyless 4-Position blade clamp for quick & easy blade changes and cutting versatility* Variable speed trigger delivers up to 2,900 SPMDCF887 - 20V MAX* XR Brushless 1/4" Impact Driver:* Up to 75% more runtime with brushless motor vs. 18v NiCad brushed motor* 3-speed settings for optimized application versatility* Precision drive in speed 1 for precision applications and added control* 3 LEDs with 20-second delay after trigger release, provide visibility without shadows* One-handed loading 1/4" hex chuck with easy grip sleeve, accepts 1" bit tips* Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)DCL040 - 20V MAX* LED Worklight:* Bright LED output - 110 Lumens* Head rotates 120 degrees* Efficient LED bulb improves runtime* Integrated hang hook for hands-free use in multiple placements
The dual-voltage 20V/60V MAX FLEXVOLT 9.0 Ah battery from DEWALT automatically changes voltage when you change tools, providing up to 6X runtime in 20V MAX tools and the power of corded in 60V MAX and 120V MAX tools. Take on tough jobs with this battery because patented technology and large format cells mean it runs cooler than the leading competitor 9.0 Ah battery pack under a constant discharge. This is the battery for FLEXVOLT power and long runtime.
This DEWALT 20V MAX XR Lithium Ion Brushless 3-Speed Hammerdrill Kit DCD996P2 features a high power, high efficiency brushless motor that delivers up to 57% more run time over brushed. The heavy-duty ½” ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength. A 3-mode LED provides lighting in dark or confined spaces – up to 20X brighter than the previous model. An added LED spotlight mode features a 20 minute shutoff function allowing for extended work time in dark or confined spaces.
The dual-voltage 20V/60V MAX FLEXVOLT 9.0 Ah dual battery pack from DEWALT automatically changes voltage when you change tools, providing up to 6X runtime in 20V MAX tools and the power of corded in 60V MAX and 120V MAX tools. Take on tough jobs with this battery because patented technology and large format cells mean it runs cooler than the leading competitor 9.0 Ah battery pack under a constant discharge. This is the battery for FLEXVOLT power and long runtime.
DEWALT'S DCS367P1 20V MAX XR Brushless Compact Reciprocating Saw Kit includes a lightweight, compact saw designed to make cutting in between studs and in other tight spots easier than with traditional reciprocating saws. The brushless motor helps to provide up to 2.5x more run time to get the job done. With a 1-1/8" stroke length and a variable speed trigger delivering up to 2,900 strokes per minute, this saw is fast and efficient. It also features a keyless, lever-action 4-position blade clamp for quick and easy blade changes in four directions for a variety of applications including flush cutting. A bright LED light is included to illuminate dark work areas.
DEWALT's XR 5.0Ah Lithium Ion Battery/Charger Kit provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200). This 5.0 Ah Lithium Ion battery is lightweight at 1.4 lbs each and compatible with the entire line of 20V MAX tools. It's a 5.0Ah high capacity battery pack that has no memory and virtually no self-discharge for maximum productivity and less downtime. It offers a 3-LED fuel gauge system that allows immediate feedback on state of charge.
Cast a broad swath of light from almost anywhere! Pack the innovative UCO Leschi LED Lantern / Flashlight when you need a versatile, lightweight, compact source of light to illuminate your adventures. The convenient, shock cord clip on the Leschi enables you to hang and focus the lantern from both horizontal and vertical surfaces. No longer limited to a pole or limb that will accept a hook or string, the Leschi Lantern / Flashlight can be lashed to a tree limb, tent pole, guy line, bar, strap or flagpole! Push the globe down to transform the lantern into a handy flashlight for reading in bed or to accompany you on late-night forays out of your tent. Offers three lighting modes, including a strobe mode.
Powerful enough to tackle your projects, the DW745 10” Compact Job Site Table Saw with Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components for a custom fit for every job. The 15 amp motor quickly rips through hardwoods with ease. Rack and pinion fence rails make fence adjustments fast, smooth and accurate, while telescoping fence rails retract to create a small, portable package. A 16" of rip easily cuts a variety of larger shelving and trim materials, and metal roll cage base offers greater durability than plastic bases. Blades can be adjusted 0 - 45 degrees for bevel applications while the adjustable rear feet are designed to level the saw on uneven work surfaces. The dust port allows for 2-1/2" vacuum hook up and minimizes clean up. A 24T carbide blade enhances cut quality and prolongs blade life, while a table coating reduces friction for smoother cutting.
DEWALT's 20V MAX Compact Brushless Drill/Driver and Impact Kit DCK277C2 features:* DEWALT brushless motor delivers up to 57% more run time over brushed* Compact (5.4" front to back), lightweight (2.0 lbs) Impact Driver design fits into tight areas* Compact (7.52" front to back), lightweight Drill/Driver design fits into tight areas* Ergonomic comfort grip handle provides ideal balance and tool control* LED light with 20-second trigger release delay provides increased visibility in dark or confined spaces* Impact driver's one-handed loading 1/4" hex chuck accepts 1" bit tipsIncludes:* (1) DCD777 20V MAX* Compact Brushless Drill/Driver* (1) DCF787 20V MAX* Compact Brushless 1/4" Impact Driver* (2) 20V MAX* Li-Ion Battery Packs* (1) Charger* (1) Kit Bag
This horizontal/vertical metalworking bandsaw from Jet has everything you need to tackle even the toughest of jobs. This saw has a wider, higher stand with a built-in storage cabinet and chip tray for greater ease of use, and offers a 9-7/16” x 10” work table in the vertical position. It has an adjustable material stop for easier repeatability—the rapid action vise miters to 45 degrees.
This 12” drill press from Jet has the power to tackle big jobs and the portability to do so anywhere. It uses a powerful 1/2 HP induction motor that can push through just about anything you throw at it, and the 3-1/2” spindle travel allows for maximum depth cutting. It also features Jet’s innovative X-shaped XACTA laser that ensures accuracy in all your projects.
DEWALT's ToughSystem Music + Charger is a highly durable, portable and stackable solution designed to supply crisp, clear sound through either the radio functionality or wirelessly through Bluetooth connectivity to any Bluetooth-enabled smartphone or music device up to 100 feet.* Premium Sound – 4 Full range tweeters + 1 Subwoofer +1 Assisted bass resonator* Charging capability - built-in charger ensures jobsite productivity by charging 12V MAX* and 20V MAX* DEWALT power tools* IP54 Rated for water and dust resistance* Connectivity to Bluetooth, 3.5mm Aux. Input, 5V/1A USB charger* ToughSystem® Carrier cart compatible* Can be stacked to other ToughSystem modules* Can run on a 12V MAX* or 20V MAX* DEWALT Li-ion power tool battery or can be plugged into a wall outlet* *With respect to 12V MAX* - Maximum initial battery voltage (measured without a workload) is 12 volts. Nominal voltage is 10.8* *With respect to 20V MAX* - Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
The DEWALT DWS779 slide compound miter saw is ideal for most cutting applications including crown molding up to 7-1/2 in. This miter saw is designed with a powerful 15 Amp, 3800 RPM motor that delivers extended power and durability. The exclusive back fence design cuts up to 2 x 14 dimensional lumbers at 90 Degree and 2 x 12 at 45 Degree.* Delivers ample power with 15 amp motor and 3800 RPM* Cuts 2x14 dimensional lumber at 90 degrees and 2x12 at 45 degrees* Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable and compact saw* Tall sliding fences support crown molding up to 7-1/2 in. nested and base molding up to 6-3/4 in. vertically against the fence while easily sliding out of the way for bevel cuts* Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy* Miters 60 degree to the right and 50 degree to the left providing increased capacity* Precise miter system and machined base fence support optimize durability and cutting accuracy* Compact, lightweight design (56 lbs.) allows for easy transport and storage* Cam lock miter handle with detent override delivers quick and accurate miter angles
DEWALT’s 20V MAX Lithium Ion Compact Drill/Driver Kit (DCD771C2) is remarkably compact and lightweight. This Drill/Driver features a heavy-duty ratcheting ½” chuck for optimal gripping on bits and accessories. The 20V Li-ion Batteries offer much longer run times, charge quicker, and have longer lives than traditional NiCd batteries - and they weigh so much less!The DCD780C2 also offers a dual-speed transmission, allowing for operating speed of 0-450 rpm and 0-1500 rpm for a wide range of fastening and drilling applications. It’s cherished by the contractor, applauded by the homeowner, and envied by the competition. Get yours today and step into the future.
This 20V MAX Premium 5-Tool Combo Kit (DCK592L2) comes fully loaded and ready to tackle any project you can dream up. A hammer Drill with a patented 3-speed all metal transmission and ½” all metal ratcheting chuck delivers 535 units watts out of maximum performance, faster application speed, and superior bit retention. The reciprocating saw has a 4-position keyless blade clamp which allows for quick and easy blade change. The impact driver features 3 LED Lights, and the circular saw features a 6-1/2” carbide blade that can cut 2 x 4’s at a 45 degree angle in a single pass. The LED work light delivers 110 lumens of light output, brightening a variety of work conditions.
DEWALT's DCK240C2 Impact Driver features:* DCD771 Features two speed transmission (0-450 / 0-1500 RPM)* DCD771 High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications* DCD771 Compact, lightweight design fits into tight areas* DCD771 1/2" single sleeve ratcheting chuck provides tight bit gripping strength* DCD771 Ergonomic handle delivers comfort and control* DCF885 Compact (5.55" front to back), lightweight (2.8 lbs) design fits into tight areas* DCF885 One-handed loading 1/4" hex chuck accepts 1" bit tips* DCF885 features 3 LED light ring withe 20 second delay to provide visibility without shadowsIncludes:* (1) DCD771 - 20V MAX* 1/2" Drill/Driver* (1) DCF885 - 1/4" Impact Driver* (2) 20V MAX Lithium Ion 1.3 Ah Battery Packs* (1) 20V MAX charger* (1) Contractor Bag
This DEWALT DWS709 12” slide compound miter saw is a powerful machine in a compact, lightweight design that allows for easy transport and storage. This miter saw features a powerful 15 amp, 3,800 rpm motor that provides the power you need to get the task at hand done. The back fence design cuts up to 2x14 lumber at 90 degree angle and a 2x10 at 45 degrees. Dual horizontal steel rails have linear ball bearings that deliver an accurate, durable and compact saw. Bottom line: this saw was designed to get the job done easily and efficiently and makes a great addition to any workshop.
This DEWALT Hammerdrill and Impact Driver Combo kit DCK299P2 features a DCD996 20V MAX XR 3-speed ½” hammerdrill that has 3-speed and was built for high performance (0-2250rpm), and features an all-metal transmission to optimize tool-to-task for fast application speeds and improved runtime. This tool can also be used for fast drilling in masonry materials while maintaining a compact size and lightweight design, measuring 8.4” front-to-back length and weighs 4.7 lbs, to fit into tight areas.The DCF887 20V MAX XR ¼” impact driver provides 1825 in-lbs if max torque at fast 0-3250 rpm speed and 0-3600 impacts per minute. This tool also features compact size and lightweight design, measuring 5.3” front-to-back length and weighing 3.4lbs.
An essential tool for home craftsmen and woodworking enthusiasts, this DEWALT table saw with rolling stand may be used for both wide and narrow rip cuts, making it great for working on cabinets, floors, decks, and trim, to name just a few applications. The rack and pinion telescoping fence system lets you make fast, accurate adjustments, and the 15 AMP motor effortlessly rips through hardwoods.The on-board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick, and cord wrap when not in use. Keep clean-up easy with the dust collection port that connects to any standard vacuum.
Get Choppin’! Here’s a tool that’ll you’ll only have to buy once: The D28715 14” Chop Saw. Ranchers, welders, fabricators and machinists agree: DEWALT is the brand to have in your shop. It features an industrial grade 15 amp, 5.5 HP motor and can handle up to 5” dia. round material and 4 ½” x 6” rectangular material held securely in its Quick-Lock vise. Or you can set up for angle cuts with DEWALT’s exclusive, tool-free, Quick-Fence system. Swapping out blades is a snap on this beauty as it comes with DEWALT’s Quick-Change™ Blade Changing System as well, leading to more efficiency and no hunting for wrenches. Its heavy-duty compression springs mean smoother operation and substantially longer wear, as compared to traditional coil springs. You’ll feel the difference the first time you use it and you’ll wonder what took you so long to pick one up. Mount it securely to your work bench or transport it easily to the jobsite and get to work Chop-Chop!* Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability.* QUIK-CHANGE™ Blade Change System increases productivity by providing the user the ability to change wheels without a wrench.* Exclusive QUIK-FENCE™ tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a wrench.* Quick-Lock Vise allows for fast clamping on different size materials to increase productivity.* Soft start extends gear and motor life by reducing start up torque.* Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity.* Extra wide solid steel base provides increased stability when cutting longer material. The four pre-drilled holes in the base allow easy bolt down to any work bench.* The solid steel base also allows user to weld jigs or stops directly to the base.* Heavy-duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain.* Heavy-duty compression spring provides smooth movement and greater durability than torsion springs.* Spindle Lock allows user to make wheel changes quickly and easily, saving time and money.
This Jet 16-1/2” drill press makes a professional-grade addition to any workshop. It spins bits up to 5/8” with 16 speeds ranging from 200 to 3,630 RPM. Featuring a 3/4 HP induction motor to drive the belts, it can run off either 115-volt outlets (for which it comes prewired) or 230-volt sources. It has a nice, large 13-3/4” worktable that glides easily with rack-and-pinion adjustment, and it tilts 45 degrees right and left to give you some flexibility on the job.