Built with Hobart quality and durability, the Handler 140 is Hobart's most popular wire feed welder and the industry's best value - it is MIG ready, no additional kit required.Operating on standard 115V household current, the Handler 140 is extremely versatile and perfect for the welder that wants to work on auto body, household repairs, or even heavier farm projects that require extra welding power. A 5-position tapped voltage control selector gives you the ability to fine tune your arc offering a smooth stable arc on all thicknesses.Built with an industrial cast aluminum drive system and a heavy duty work clamp - the Hander 140 delivers a wire welding package with industrial performance. Includes: 10 ft. H100S2-10 MIG welding gun with liner, built-in gas valve, dual gauge regulator and gas hose, 10 ft. work cable and clamp, extra .030 inch contact tips, sample spool of .030 inch flux-cored welding wire and 8 inch wire spool adapter.
Portable and compact, the Hobart Champion 145 welder/generator provides up to 4500 surge watts of AC power, wherever and whenever you need it. The unit provides up to 145 amps of DC welding power, making it an ideal choice for maintenance and repair projects. Includes: Running gear. Cables not included.
The Hobart Handler 190 is spool gun ready - directly plug-in the optional SpoolRunner™ 100 spool gun, eliminating feeding problems associated with aluminum wire welding. No additional control box or adapter is required to connect the SpoolRunner 100. A selector switch for MIG gun or spool gun operation makes switching guns quick and easy. Built with quality and durability, the Handler 190 is a wire welding package with industrial performance, easy to set and adjust for different materials, thicknesses and wires. Includes everything you need to weld with flux-cored wire or solid wire. Includes: 10 ft. H100S4-10 MIG welding gun with liner, built-in gas valve, dual gauge regulator and gas hose, 10 ft. work cable with clamp, extra .030 inch contact tips, sample spool of .030 inch flux-cored welding wire and spool shaft to accommodate 4 or 8 inch spools.
The rugged and precise Lincoln® Electric Easy-MIG® 140 welder and its full set of accessories may be used virtually anywhere for general shop, farm, home, and auto welding applications. With a simple two knob control, the cast aluminum welder is easy to set up for gasless flux-cored welding for deep penetration on thicker steel, or gas-shielded MIG welding on thin gauge, stainless, or aluminum steel. The adjustable 50-1500 IPM wire feed speed control ensures a consistent beading and minimizes splatter and wire tangling.Includes:* Magnum® 100L gun and 10' cable assembly with 4-pin MS-type connection for trigger control* Spindle adapter for 8" diameter spools* Harris® 3000290 gas regulator* 52" hose for AR/CO2 and CO2 gases* Sample spools of .025" SuperArc® L-56® MIG wire and .035" Innershield® NR®-211-MP flux-cored wire* Work clamp and 10' cable* Learn-to-Weld DVD
The Hobart Handler 210MVP Multi-Voltage Plug (MVP) provides flexibility to use either 115V or 230V input power in a twist, no tools required. The Handler 210MVP will automatically adjust itself to the correct input power providing superior arc performance regardless of the power source. It is the one portable MIG welder that has 210 amps of welding power packed into a portable case. Arc starts are crisp and direct, keeping post weld clean-up to a minimum. The compact design gives you a professional grade welder without reducing your space limitations on a farm "crash truck" or in the shop. There is no other competitor that will offer this style of welder in a similar package. The Handler 210MVP is spool gun ready for the optional SpoolRunner 100 direct plug-in spool gun. Includes: 10 ft. H100S4-10 MIG welding gun with liner, built-in gas valve, dual gauge regulator and gas hose, 10 ft. work cable with clamp, sample spool of .030 inch flux-cored welding wire, extra .030 inch contact tips and an 8 inch wire spool adapter.
The superior arc quality of the IronMan 230 delivers a flawless weld, making spatter and post-weld clean-up a breeze. The IronMan 230 outperforms the competition on arc quality, voltage control, duty cycle and value. Versatile for MIG and flux-cored welding, it includes a built-in running gear and cylinder rack. The sloped front panel makes the welding controls easy to see and access. Purchase the optional Hobart direct connect spool gun – DP 3545-20 – for exceptional aluminum welding. Whether you’re a professional or just want to weld like one, the IronMan 230 is unmatched in its class. Includes: Built-in running gear, 15 ft. H200L4-15 MIG gun with liner, regulator/flow meter, 5 ft. gas hose with fitting, 10 ft. work cable and clamp, extra .030 inch contact tips and .030/.035 inch dual groove drive roll.
An ideal solution for light and heavy industrial users, the Hobart® AirForce 4i is a lightweight, inverter-based designed plasma cutter that uses an electrical arc and compressed air to cut steel, aluminum, and other conductive material. Compared to oxy-fuel cutting torches, this welder cuts faster and more precisely, resulting in a thinner kerf and less slag to clean up. Designed to help simplify your welding process, the AirForce 40i has a smaller heat-affected zone for less warping; requires no gas pressure settings or flame tuning; and eliminates the need for pre-heating your metal. This plasma welder requires use with an air compressor—4.8 CFM at 90-120 PSI recommended. Includes XT40R torch with 12' lead and consumables, 12' work cable with clamp, and a 10' power cord with plug.
Designed for light fabrication projects around the home, farm, and ranch, the Hobart Handler 130 is a wire feed welder that's ideal for outdoor applications where shielding gas could be blown away. Its single-knob EZ-Mode setting lets you adjust easily for material thickness, allowing for simultaneous control of voltage and wire speed. With the addition of an optional regulator and shielding gas, the traditional two-knob mode is set up for MIG welding with .023-.030" (0.6-0.8 mm) solid wire. Includes comfortable 8' (2.4 m) H-9B gun; work cable with clamp; sample spool of .030" (0.8 mm) self-shielding flux-cored wire; 0.030" (0.8 mm) contact tips; spool shaft to accommodate 4" spools; power cord with plug; weld set-up chart; and owner's manual.
A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle™ 10,000 Plus does a variety of basic welding jobs. And with 10,500 watts of surge AC generator power, it handles a variety of other jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply needed) or emergency power.
The Inverter 80 is a portable DC inverter stick welder. This unit uses 120V 60hz input power on a dedicated 20A line. The Inverter 80 is ideal for Do-It-Yourself projects and for light maintenance. Stick weld with DC electrodes up to 3/32". TIG weld steel and stainless steel with the optional ACTT1 TIG Torch. This unit features a cooling fan and Thermal Overload protection. It also has a Hot Start feature to help get stick electrodes started easier.
The Hobart® AirForce 27i is a lightweight, inverter-based designed plasma cutter that uses an electrical arc and compressed air to cut steel, aluminum, and other conductive material. Compared to oxy-fuel cutting torches, this welder cuts faster and more precisely, resulting in a thinner kerf and less slag to clean up. Designed to help simplify your welding process, the AirForce 27i has a smaller heat-affected zone for less warping; requires no gas pressure settings or flame tuning; and eliminates the need for pre-heating your metal. This plasma cutter requires the use of an air compressor—3.0 CFM at 90-120 PSI recommended. Includes XT30R torch with 12' lead and consumables, 12' work cable with clamp, and a 10' power cord with 120V/15A and 240V/50A plugs.
The Metal Man FC125 is a 115V flux core only wire feed welder that is designed to be economical and easy to use. It is capable of welding steel up to 3/16 of an inch in a single pass using either .030 or .035 flux core wire. The cooling fan and thermal overload protection help prevent overheating. The attached 6 foot flux core gun and ground cable with clamp make this machine portable and ready to weld out of the box.
The AC-225 compact stick welder produces an extremely smooth AC arc for welding a wide variety of materials including carbon, low alloy, cast irons, and stainless steel metals. Use this welder around the shop for simple repairs and maintenance or light fabrication needs. So handy to use, this will be your ‘go-to’ welder.
The Hobart® AirForce 12ci is a lightweight, inverter-based designed plasma cutter that uses an electrical arc and compressed air to cut steel, aluminum, and other conductive material. Compared to oxy-fuel cutting torches, this welder cuts faster and more precisely, resulting in a thinner kerf and less slag to clean up. Designed to help simplify your welding process, the AirForce 12ci has a smaller heat-affected zone for less warping; requires no gas pressure settings or flame tuning; and eliminates the need for pre-heating your metal. This plasma welder has a built-in air compressor for easy use right out of the box. Includes XT12R torch with 12' lead and consumables, 12' work cable with clamp, and a 7' power cord with plug.
K-T Industries .035 ER 5356 wires and rods are generally recommended for welding 5050, 5052, 5083, 5154, 5356, 6061, and 6063 aluminum alloys. This wire is to be employed in all types of structural strength welded joints. The tensile properties of the base materials of the aluminum-magnesium type are not as drastically affected by the heat of the welding arc as are the heat-treated high strength aluminum alloys. Excellent for color match application. Examples of applications which utilize ER5356 include: diesel engine bases, gun mount bases, truck frames, ship structures, architectural structures and cargo tanks armored vehicles.
For REAL performance, REAL look and REAL quality, try the Metal Man ARF8730SGC Real Flame Professional Auto Darkening Welding Helmet. This full feature welding helmet offers HOT features like an extended viewing area, 4 arc sensors and the Dual Range Shade control for shade settings from 5 to 13.This helmet is solar powered and battery backup from a single CR2450 battery. Made to fit right, the 5 point adjustable head gear allows you to make it fit your way.With ANSI and CSA approval, the Metal Man ARF8730SGC.Auto-Darkening helmet is safe, functional and attractive to users.• Viewing Area 3.74 in. x 2.44 in.• Dual Range Variable Shade Control 5 to 8 and 9 to 13• Grind Mode• Auto On/Off• Dial Adjustable Sensitivity & Delay• Switching Time 1/25,000 second• Low Amp TIG to 2 Amp• UV/IR Protection to Shade 16• DIN Optical Rating 1/2/1/1
This completely portable, lightweight oxy/acetylene tote outfit weighs less than 35lbs. and is ready to work where you need it. The compact design stores easily for road travel or when not in use. Ideal for general maintenance and repair, farm use, home use or shop applications. The all brass regulators provide efficient and dependable control of gasses. The high density polyethylene carrier is extremely durable and includes a hose wrap and accessories storage compartment. This outfit includes new (never filled) cylinders that must be filled prior to use. 2-year limited warranty. Includes: Brass torch handle, brass/stainless steel cutting attachment, cutting tip, welding tip, flip-front goggles, brass regulators, tip cleaner, 10cf Acetylene cylinder, 20cf Oxygen cylinder, single function tank wrench, single flint striker, twin hose, plastic tote w/ hose wrap, instruction manual and new cylinder filling information.
Getting projects done is easy with the Easy-MIG® 180 welder. Perfect for all of your light fabrication needs around your shop or at home this two-knob control makes it easy to tackle thin steel, stainless steel, or aluminum metals. With all you can do with this welder, it is the perfect choice for all of your personal needs.
K-T Industries .035 ER 70S-6 is a mild steel welding wire containing a higher level of manganese and silicon to produce quality welds when used on dirty or rusty steel. The high silicon content increases the fluidity of the weld pool, creating a smoother bead appearance and resulting in minimal post weld grinding. Note: Shielding gas is require with this product. Typically used for construction work, tanks, truck bodies, farm implements, pipes, steel casting or forgings, shaft build-ups and general shop fabrication. Shielding gasses range from straight CO2 to high argon blends.
Metal Man's Welding Helmet is a great way to keep safe while welding. It offers a clear view of the welding area, even when the arc is not on. The viewing window is 3.62" Wide, 1.36" High and Adjusts From Shade 9 to Shade 13. The helmet comes with 5 way adjustable headgear for a more comfortable fit and is ANSI and CSA Approved.
The Hobart torch kit includes many features found in more expensive kits. This medium duty torch kit is perfect for a multitude of applications such as farm and ranch use, home hobbyist projects, automotive applications, light fabrication and general repair. Because this acetylene torch kit comes with a quality "T" grade twin hose, it can operate on propane by simply changing to propane tips. Comes complete with: All Brass Oxygen Regulator (CGA 540) All Brass Acetylene Regulator (CGA 510) Durable Brass Forged Silver Brazed Torch Handle and Cutting Attachment for Extended Life Factory Installed Reverse Flow Check Valves for Added Safety #0 Victor Compatible Cutting Tip #0 Copper Welding/Brazing Tip Flint Lighter & Soft Frame Goggles 20 ft (6.1 m) 3/16" Twin Hose "T" Grade w/ "B" Fittings Operations & Safety Manual Optional Torch Mount Flashback Arrestors.
Suitable for all-position welding of light gauge steel or thin plate up to 1/2", this Lincoln® Electric .035 InnerShield® NR®-211-MP wire is appropriate for applications with copper back-up, sheet or thin gauge metal, propane cylinders, robotics/hard automation, galvanized or zinc coated carbon steel, and general fabrication. Results in low spatter and leaves an excellent bead appearance.