Give yourself some extra space for hauling your gear with the Uriah Products cargo carrier. It mounts right onto your vehicle’s hitch and works with just about any 2” receiver. It can carry up to 500 pounds when it is in use, and it measures 60” x 22”. It’s finished with a corrosion-resistant black enamel finish that ensures excellent durability.
This folding cargo carrier form Uriah Products is a practical device that will give you room to carry up to 500 pounds of cargo on the rear of your vehicle. It mounts right to your vehicle’s hitch and works with most 2” receivers. It measures 60” x 22” and you can easily fold it up when not in use to take up less space and drive a little safer. It has holes for tie-down straps all over and it has a mesh bottom that allows moisture to easily drain.
Quickly and easily move your trailer around the shop or other tight spaces with Carry-On’s Trailer Transporter. It has an extra-long handle to give you the necessary leverage to move small utility trailers weighing up to 600 pounds. Save the strain on your back that comes with manually moving trailers and the time it takes to hook your trailer up to a truck just for a short move with this Carry-On trailer dolly.
This double-eye leaf spring from Uriah Products has four leaves to ensure durability. It has a weight capacity of 1,750 lbs, and it’s 25-1/4” long between eyes.
This single-axle fender from Uriah Products is crafted out of 16-gauge steel to ensure durability. It has a weld-on design and it also comes with a weld-on back installed. It measures 9” by 32”, meaning that it can accommodate tires up to 15”. It comes unfinished, so you can paint and weld it just how you like.
Raider low-profile trailer guides are an excellent accessory for the avid snowmobiler. They allow for easy loading and unloading of your sled, and the multi-channel design protects your machine from wear and tear while the low-profile design allows you to use your trailer for other jobs without needing to remove the guides. They install with simple hand tools in about 15 minutes. With Raider low-profile trailer guides you can spend more time on the trail and less time loading and unloading.
This single-axle fender comes from Uriah Products manufactured out of 16-gauge cold rolled steel with a 1” lip on the sides. It has an unfinished design that means you’re free to weld and paint it how you like, and its 9” by 32” size allows it to accommodate up to 15” tires.
By keeping some of these Uriah Products replacement U-bolts on hand, you’ll be able to replace existing worn U-bolts on your trailers before they break, saving you the headache of having one break on you when you’re on the road. These U-bolts come in a back of two and included the required nuts. They’re 5-1/2” long and accommodate 2-3/8” axles.
This Uriah Products tandem-axle trailer fender has a teardrop design and no back. It’s constructed out of durable 16-gauge cold rolled steel, and it’s unfinished so that you can weld it and paint it just how you like. Its 9” by 72” dimensions make it ready to accept up to 16” tires.
Dee Zee Tool Box - Triangle toolbox for trailer tongues is constructed of strong yet lightweight plastic. Built to mount onto trailer tongues, this tool box works well for storage wherever you may need it. Steel hasp latch provides security (padlock not included). Made in the USA.
A twist-free twist on the classic bungee cord, Nite Ize's Knotbone Flat Bungee has carabiner clips at each end instead of open clips; it attaches to your anchor points, then locks there securely. Made of durable, high quality textured flat cord that threads through each end, the Knotbone Flat Bungee adjusts from 38" to 9". Once you've adjusted it to the right length for your job, it secures in place with a quick wrap-and-lock motion.Nite Ize even added small self-clipping plastic caps to the cord ends to keep them in place. No more pulling, stretching, and re-hooking to get the tension you want - job after individual job, the KnotBone Flat Bungee stays right where you attach it, pulls securely to the exact length you need, and locks there.
This trailer spring tie plate from Uriah Products will help you secure leaf springs to your trailer axle. This model will accommodate 2-3/8” axles with 1-3/4” wide springs.
Don’t get caught in the middle of a job with a busted tire! Carry-On’s spare tire carrier mounts directly to most trailer frames up to 5 inches wide and can hold 8-inch to 15-inch tires. We don’t even need to tell you how much time and hassle a spare tire can save in the event of a flat or unusable tire in the field. With this tire mount you can always have one on hand, even if you’re towing your trailer behind different vehicles. Protect yourself today with Carry-On!
This Uriah Products kit contains the screws and sleeves to anchor your wheel chocks to a wood floor, giving you a little bit of added safety.
These Uriah Products U-bolts are great items to keep on hand since U-bolts are among the trailer parts that break down most often. Keeping a few in the shop allows you to monitor your trailer’s existing U-bolts and replace them when they start showing wear instead of waiting for them to break when you’re on the highway. These bolts accommodate 3” axles and are 7-1/4” long. They come with the nuts required for installation.
This weld-on hanger kit from Uriah Products will help you install single axle, double-eye, and 1-3/4” springs. It includes everything you need to hang two springs, including two brackets, shackles, and shackle straps.
RhinoGear's trailer chock is designed to fit neatly between the wheels of a tandem axle trailer. It spreads the trailer's weight around evenly and also adds an additional measure of safety. Lightweight, yet sturdy, you'll be able to use the RhinoGear® chock and block for years to come.
This rectangle reflector from Uriah Products is designed to get your trailer up to DOT reflectivity standards, but it’s useful in just about any application that calls for a similarly sized reflector. It has an adhesive back that makes installation incredibly easy, and it measures 4-3/8” by 1-1/8”.
This round reflector from Uriah Products has an adhesive back for easy installation. It’s 3-3/16” in diameter, and it is designed to help your trailer meet DOT requirements for reflectivity, though it’s useful in just about any other application that calls for a reflector. The adhesive backing is designed to stick securely to metal, painted metal, and plastic.
This oval red reflector from Uriah Products has adhesive on the back that makes for easy installation. It’s designed to help your trailer meet DOT requirements for reflectivity, but it’s useful in just about any other application requiring a reflector. It measures 4-3/8” long and 1-7/8” tall, and the adhesive works on metal, painted metal, and plastic.
Trailer axle U-bolts are among the trailer parts that fail and break most frequently, so it might not be a bad idea to keep some of these Uriah Products round U-bolts on hand. Doing so allows you to monitor your existing U-bolts and replace them at the first sign of significant wear and tear, which can save you the hassle of having a bolt break when you’re on the road. This model is 7” long and can accommodate 3” trailer axles.
Shackle strap bolts are among the trailer parts that break the most due to the high amounts of wear and tear they face. This means that it’s a good idea to keep some extras on hand, such as the 4 included in this set from Uriah Products. That allows you to replace your existing strap bolts at the first sign of wear. These bolts are 3” long with a 9/16” diameter.
This Uriah Products spare tire carrier works with 4- and 5-lug wheels, and it fits all 8” through 14” wheels, and it can also accommodate many 15” wheels. It’s easy to use, simply assemble to the tongue of the trailer and slide through the lug holes of the wheel. This model doesn’t lock.
This four-pack of conspicuity tape strips from Uriah Products is designed to stick on trailers, but they work for any application where you need a quick way to make something more reflective and visible. Each strip is 12” long and 1” wide with an adhesive back, and they meet or exceed all DOT standards for trailer reflectivity.