Give yourself some extra space for hauling your gear with the Uriah Products cargo carrier. It mounts right onto your vehicle’s hitch and works with just about any 2” receiver. It can carry up to 500 pounds when it is in use, and it measures 60” x 22”. It’s finished with a corrosion-resistant black enamel finish that ensures excellent durability.
This folding cargo carrier form Uriah Products is a practical device that will give you room to carry up to 500 pounds of cargo on the rear of your vehicle. It mounts right to your vehicle’s hitch and works with most 2” receivers. It measures 60” x 22” and you can easily fold it up when not in use to take up less space and drive a little safer. It has holes for tie-down straps all over and it has a mesh bottom that allows moisture to easily drain.
Acme Product's 7" Hitch Extender extends the hitch pull-pin hole and prevents certain trailers from hitting the tow vehicle when making sharp turns while towing. It features a welded stress collar, and pre-drilled tube holes to accommodate most ball mount requirements. It is made out of steel and comes with a black powder coat finish.
Acme Product's Class III Ball Mount Combo Kit with 2" Ball features a 4" drop class III ball mount, and a 2" ball. Includes a 5/8" diameter hitch pin and clip. This kit fits 2" x 2" receivers.Sizes:2" = 2" Drop x 3/4" x 2" Ball Diameter (Rating: 6000 lbs GVW/ 600 lbs GTW))4" = 4" Drop x 2-3/4" x 2" Ball Diameter (Rating: 6000 lbs GVW / 600 lbs GTW)
The adjustable tri-ball mount from Uriah Products allows you to quickly change between different ball sizes without needing to remove the assembly or carry multiple mounts. It’s perfect for vehicles that regularly tow different trailers. It includes three ball hitches: 1-7/8”, 2”, and 2-5/16”, and a 2-point mounting design that provides stability and safety. It fits standard 2” square receiving tubes and has a 10,000 lb maximum GTW rating along with a 1000 lb maximum tongue rating. This model is adjustable, too, so you can easily tow trailers of different heights.
Acme Product's Class II Ball Mount - 882 Series features a 1-1/4" x 1-1/4" solid steel shank with a 3/4" diameter trailer ball hole. Also has a 90 degree platform bend and a durable black powder coat finish.Sizes:1-1/4” = 1-1/4” Drop x 5/8” Rise x 6-1/2” Shank (GVW: 3500 lbs)4” = 4” Drop x 2-7/8” Rise x 8” Shank (GVW: 3500 lbs)
This Buyers Products Company adjustable ball mount gives you flexibility when it comes to towing trailers at different heights. The flexibility doesn’t come at the expense of heavy-duty performance, though: it’s forged out of heavy duty steel with a powder coat finish that resists rust and corrosion. It provides safe towing of up to 6,000 pounds of maximum gross vehicle weight and is designed for use with 2” receiver tubes.
This adjustable hitch can be dropped or risen by 6 inches. Easy height adjusting makes using this hitch for different towing reasons straight forward and easy. The hitch comes with two ball sizes: 2" and 2-5/16" again making it ideal for different towing applications.
Designed for all 2-1/2" receivers, this 2-1/2" sleeve is made out of quality aluminum to prevent rust, chips, and peeling. Measuring 5.5" in length, this sleeve is made with very tight tolerances to help prevent movement or chatter.
Acme Product's Clevis Mount is designed for use with agricultural or industrial equipment. The mount accepts a 1" diameter clevis pin or 1" diameter shank trailer ball and is rated to 5,000 lbs GVW / 500 lbs GTW. It has a black powder coat finish.
Acme Product's Receiver Tube with Collar has many great features. It has a 2" x 2" opening sized to accept all 2" x 2" ball mounts. It has a welded stress collar and may be bolted or welded to frame for custom fabrication installations and comes with 2 pre-drilled 5/8" diameter tube holes that will accommodate most ball mount requirements. The tube has a black powder coat finish.
Extend the reach of your receiver and give yourself some extra towing clearance with this 12" receiver extension from Buyers Products Company. It’s forged out of cast steel and features a black powder coat finish to prevent rust and corrosion. It accepts all 2" hitch accessories, but note that it does reduce your hitch capacity by 1/3.
The 4” EZ Adjust Hitch has a 2” x 2-5/16” combo ball. The 2” ball is capable of towing up to 8,000 lbs while the 2-5/16” can tow 10,000 lbs. This hitch can be adjusted 4” up or down. Adjusting the height is a breeze. Simply pull the pin, adjust it to the desired height, slip the pin in place and you are done. It’s as easy as that.
Give yourself a little extra maneuverability when you’re running around your truck and trailer connection with this step bumper hitch from Buyers Products Company. It fits most full-size trucks that have step bumpers and delivers a 3,500 pound towing capacity. It features a black powder coat finish that helps resist rust and corrosion, making this an accessory that should last as long as your truck does.
Acme Product's Class III Ball Mount - 883 Series is rated up to 5,000 lbs GVW with a GTW of 500 lbs. It features a 2" x 2" solid steel shank, a 2" receiver opening, and a 1" diameter trailer ball hole. Another great trailer accessory from Acme Products.
Acme Product's 11.25" Long 2" Drop Ball Mount is a Class III ball mount that is made out of steel and is rated to 5,000 lbs GVW. Another great Acme Products trailer accessory.
Acme Product's 2-1/2" to 2" Hitch Adapter converts a 2-1/2" receiver hole to a 2" receiver hole. It adapts a 2" ball mount and accessories to a 2-1/2" receiver tube. Comes in a black powder coat finish.
The Stainless Steel Lock Set was designed for all of the Andersen Rapid Hitches. It includes 1 adjustment pin lock and 1 receiver pin lock for 2”, 2-1/2” and oversized receivers. It comes with 2 heavy-duty keys which are reversible and keyed alike for easy use. A rubber dust cap protects the key slot from liquids. This lock set provides complete 24/7 security for your hitch mounted accessories. This lock set is a great value for the money! Dimensions: Adjuster pin – 4-3/8” x 5/8” (inside shank), receiver pin 3-1/2” x 5/8” (inside shank)
The 8" EZ HD 14K Hitch is capable of towing anywhere from 10,000 lbs to 14,000 lbs depending on the ball you use. With the ability to quickly change the height up or down 8" by pulling the pin, adjusting the hitch and replacing the hitch, towing is easy and fun to do.
Acme Product's Class V Heavy Duty Ball Mount - 743 Series are rated to 12,000 lbs and are a great addition to your trailer setup. Features a 90 degree platform bend and is made from solid steel.Sizes:3-1/2" = 3-1/2" Drop x 2" Rise x 10-1/2" Length (GVW: 12000 lbs)5" = 5" Drop x 3-1/2" Rise x 10-1/2" Length (GVW: 12000 lbs)
Acme Product's 1-1/4" to 2" Hitch Adapter is ideal for mounting bicycle carriers, cargo carriers and other light duty receiver hitch accessories. It is 6" long and features a welded stress collar, and comes with pre-drilled tube holes and accommodates most ball mount requirements.