This magnetic towing light kit from Uriah Products installs quickly and allows your trailer to meet DOT specifications. This kit comes with two stop/turn/tail lights that are attached strong, scratch-resistant magnets for safe attachment, a 4-way flat harness adapter, 20’ of wire, and a 5’ span between the lights, allowing them to fit almost any vehicle. The lights have red rear-facing lenses and amber front-facing lenses.
This red LED stop/turn/tail/back-up light from Uriah Products comes ready for installation with a rubber grommet and a standard three-prong plug design. It’s sealed to keep out water, making it acceptable for use on boat trailers, and the contact sockets are filled with silicone to prevent corrosion. It fits standard trailer light mounts, and the LED has seven diodes to throw off more than enough light.
This two-pole flat trailer wire connector from Uriah Products is a durable, 12” flat extension loop. You can use it with 12-volt accessories, and if you want you can cut the cord to create two compatible plugs. It features 16-gauge copper wire construction and tin-plated corrosion-resistant corrosion.
This Uriah Products marker and clearance light has two bulbs and a cover that provide good visibility. It’s 4-1/8” wide and 2” tall and runs off a single lead in 12-volt DC systems.
This Uriah Products red LED stop/turn/tail/back-up light includes a rubber grommet and comes ready to be hardwired into your trailer’s 12-volt DC circuit. It fits standard trailer light mounts and uses standard three-prong plugs, so installation is a breeze. It’s sealed to be durable enough for marine use and inclement weather, and the six-diode LED throws off enough light to keep you visible to other drivers.
Increase your trailer’s night time visibility with the beehive marker and clearance light from Uriah Products. It comes with a bracket and the necessary hardware to install it right on the fender.
This Uriah Products submersible incandescent light kit has everything you need to get your trailer’s rear lighting system ready for the road. It includes two square stop/tail/turn lights, a 25’ trailer wire harness, a 4’ trunk connector, a license plate bracket, and all the necessary mounting hardware. The lights use an incandescent bulb housed in a red lens that’s sealed to be waterproof and fully submersible, making this kit a perfect choice for your boat trailer.
This low-profile boat trailer light kit from Uriah Products comes with all of the necessary hardware to get your trailer lighting up to DOT standards. It includes two stop/turn/tail lights, a 25’ 4-flat trailer wire, a license plate bracket, and all of the hardware required for installation. The lights use LEDs housed in red lenses that are sealed to be waterproof and fully submersible.
This Uriah Products adapter converts the 7-way RV-style connector on your vehicle into a flat 4-way connector. It installs easily, just plug the adapter into the existing connector and you’re good to go! It’s made out of durable plastic so that it won’t corrode, even after years of use.
This Uriah Products adapter converts your vehicle’s round 7-way RV connector into a flat 5-way connector. It’s quick and easy to install, simply plug it into your existing connector! It’s constructed out of high-impact plastic to resist corrosion for years of use.
This Uriah Products extension loop extends your current 4-way connector by 12”. It includes an integrated ground, and it features corrosion-resistant terminals that ensure durability.
This license plate light from Uriah Products is designed as a replacement for OEM lights on trucks and trailers. It features a stud-mounted design with the standard 2” between centers.
This oval red stop/turn/tail/back up light from Uriah Products uses an incandescent bulb and sealed lens design to provide good lighting for your vehicle or trailer. The seal is good enough to hold up to use on a boat trailer, and the contact sockets are filled with silicone to prevent corrosion. It fits in standard trailer light mounts, and installation is easy as this light uses standard three-prong plugs.
The Uriah Products 4-pole flat vehicle-end wire connector comes with a 4-pole connector for the vehicle end of a circuit. It has 48” of wire and three easy-to-use splice connectors. The wires are color coded to make your job a little easier, and this kit also comes with a circuit tester which you can use to test the wires and then keep around your shop for future projects.
This Uriah Products adapter converts your vehicle’s round 7-way RV connector into a round 6-way adapter with a center pin brake. There’s no installation required other than simply plugging the adapter in to your existing connection. It’s constructed out of impact-resistant plastic to provide years of corrosion resistance.
This stop/turn/tail light from Uriah Products is designed for vehicles without a license plate illuminator. It’s a stud-mounted light that includes the necessary hardware for installation, and it uses an incandescent bulb that’s housed in a red lens that snaps on and off for easy bulb replacement.
This submersible incandescent light kit from Uriah Products allows you to install lighting on the rear of your trailer that meets DOT requirements. It includes two incandescent rectangular stop/tail/turn lights, a 25’ trailer wire harness, a 4’ trunk connector, a license plate bracket, and all of the hardware required for installation. The lights are sealed to be watertight and submersible, so they can hold up to use on a boat trailer or whatever other harsh operating conditions you subject them to.
This LED stop/turn/tail light from Uriah Products uses a bright 12-diode LED to throw of a ton of light for good visibility. It makes for a good upgrade from an incandescent light or a replacement for a damaged OEM LED. This model is designed for the left side of trailers under 80” wide, and it has a 4-1/2” diameter.
This round light from Uriah Products has a flush mount design so that no part of it will protrude from your vehicle. It can be used as a stop, turn, or tail light in your vehicle’s 12-volt DC circuit. It comes housed in a bracket ready to install.
This round LED stop/turn/tail light from Uriah Products has a durable red lens that will keep it in service for years to come, and it includes a 10-diode LED for exceptional visibility. It measures 4” across, and it has a universal two-prong design for easy installation.
This submersible incandescent light kit from Uriah Products contains everything you need to install road-ready rear lights on your trailer that’s over 80” wide. It includes two square stop/tail/turn lights, a 25’ trailer wire harness, a 4’ trunk connector, a license plate bracket, 2 amber side marker lights, and all the necessary mounting hardware. The lights are sealed to be waterproof and fully submersible, making this kit a great fit for your boat trailer.
This adapter from Uriah Products easily converts your vehicle’s OEM harness into a connector that can accept both round 7-way RV and flat 4-way adapters. It’s incredibly easy to install, just install the bracket with the included hardware and plug the adapter into the vehicle’s OEM harness receptacle and you’re good to go! The adapter is made out of impact resistant plastic that won’t corrode, and if you regularly haul different trailers with 7-way and 4-way connectors this item will save you countless hours of work over the long run.
This clearance light from Uriah Products has a stud mount design and comes with the hardware necessary to install it. It measures 2-3/4” wide by 2-1/8” high, and it has a rectangular stud mount that also acts as a ground.