This red frost-proof yard hydrant head assembly is manufactured by Water Source to work on their frost proof hydrant assemblies. Manufactured out of solid die-cast steel to provide excellent durability, the rod, plunger, seat, and linkage are replaceable without any digging - if you have to perform some maintenance on these parts, it won’t turn into an all-day project. This hydrant also features a nylon valve seat that provides a perfect leak-proof seal that can also be quickly replaced.
This Water Source 30/50 pressure switch has a low-pressure shutoff that automatically shuts off the pump when there’s a dramatic decrease in pressure that can be caused by malfunctions like a leak in the discharge pipes or a faulty pressure tank. When everything is operating normally it signals the pump to start when the water system drops below 30 PSI, and it stops at 50 PSI. It’s designed to be used with submersible well or jet pumps, and it must be used in conjunction with a well pressure tank to operate correctly.
This pitcher pump from Water Source is designed to provide easy, versatile use as well as a long lifespan. It’s constructed out of durable cast iron for optimal strength and good durability, and the lag bolts are reinforced for additional longevity. It has a pitcher spout that’s designed to hold a pail for easy operation, and the cap is adjustable for a wide range of handle positions, letting you use it in the easiest way possible.
This Water Source replacement clevis rod is designed for use on their red frost-proof yard hydrants. It connects to the main hydrant rod with male threading, and has a solid brass design that ensures durability and complies with federal low-lead regulations.
The brass foot valve from Water Systems is designed to hold prime in the pump while filtering large debris from lakes, wells, ponds, and the like. It’s spring loaded and manufactured with high-quality brass with a perforated steel strainer and a wide channel for maximum flow and solid durability. It’s rated to withstand pressures up to 200 PSI.
This 4-in-1 foot valve from Water Source fits four pipe sizes from 3/4” to 1-1/2”. It keeps your pump primed while filtering debris from water from lakes, wells, ponds, and other water sources. It’s built with corrosion-proof acetyl polymer for solid durability, and it works with jet and centrifugal pump systems.
The 30/50 well system pressure switch from Water Source will signal your pump to start when the water system’s pressure drops to 30 PSI, and it shuts off once it reaches 50 PSI. It’s designed to be used with submersible well or jet pumps, and it must be used in conjunction with a well pressure tank. It can be wired to 115-volt or 230-volt systems.
This Water Source hydrant repair kit allows you to invest in a single kit in order to keep a number of different parts for maintaining your yard hydrant conveniently on hand. It includes replacement plungers, O-rings, steel linkage, a packing nut, a pivot connector, and set screws -all designed for frost-proof yard hydrants.These parts are compatible with several hydrant brands including Pro Plumber, Water Source, Parts2O, Simmons, Woodford, Clayton Mark, and ShurDri.
This red frost-proof yard hydrant head from Water Source allows you to invest in just the parts you need and nothing more, when it comes to maintaining your water system. This head is constructed out of heavy-duty cast iron for outstanding durability, so you shouldn’t have to replace it for years to come.
This Water Source pressure switch is designed for use with submersible well pumps or jet pumps, and must be used in conjunction with a well pressure tank. It signals the pump to start when the system’s pressure drops below a certain PSI, and it stops once it reaches the maximum PSI. The PSI range is factory set, and it can be wired to 115 volt or 230 volt systems.
This pressure gauge from Water Source will measure the water pressure in a well system or pressure tank. It has a 1/4” lower connection that’s made out of durable brass, and the large black font is easy to read on the gauge’s white background. It’s safe for use in systems up to 100 PSI.
This 1” brass check valve from Water Source helps keep your jet, submersible, and centrifugal pump systems primed by preventing water from back flowing when a pump shuts off. It’s built out of solid brass to ensure a long lifespan and meet federal low lead regulations. Rated for up to 200 PSI, it also includes a poppet with Buna-N O-ring, a stem guide, and a wide channel for maximum flow.
The Water Source cast iron foot is used with gasoline engine pumps for superior performance. It maintains constant priming with its leak-proof design. The screen around the foot helps keep foreign objects out, and it features a corrosion-resistant finish that delivers solid durability.
The heat shrink splice kit comes with 4 transparent heat shrink tubes and 4 butt connectors. All of the components are waterproof, and they work with 14, 12, and 10 AWG submersible wires. These tubes shrink around the wire when heat is applied to connect or terminate a single wire, and these tubes are clear with internal glue coverage so that you can see the connection and visually confirm its quality.