Battery Doctor’s® 20 Watt Solar Panel Charger Kit also allows you to charge and maintain your RV, boat, or cabin batteries using sustainable energy from the sun. Made with an aluminum frame with durable plastic edging, this solar panel charger measures 46" L x 15" W x 2" D. A 12 Volt socket cable and battery cable are also included.
Battery Doctor’s® 5 Watt Solar Panel Trickle Charger – Maintainer Kit allows you to charge and maintain your RV, boat or cabin batteries using sustainable energy from the sun. This off-grid kit contains what you’ll need to have power where and when you need it.WirthCo’s Solar Charging Kit includes a 5 Watt solar panel, a male output adapter (cigarette lighter adapter), alligator clips, connectors and mounting hardware.
Battery Doctor’s® 9 Watt Solar Panel Trickle Charger Maintainer Kit allows you to charge and maintain your RV, boat or cabin batteries using sustainable energy from the sun. The panel features a durable plastic frame and has an Amp rating of up to 750 mA. The dimensions are 30" L x 12" W x 1" D.A male output adapter (cigarette lighter adapter), alligator clips, mounting hardware (screws) and a 10' solar panel lead wire are all included.
This 12 volt 10 amp solar controller maintains and regulates 12 volt batteries from overcharging and discharging and maintains 12 volt batteries in a fully charged state. Small, compact, and easy to mount, this controller is for use with gel-cell, AGM, deep cycle and all lead-acid 12 volt batteries.This solar controller handles up to 10 amps (120 watts) of array current and provides maintenance-free protection of your solar panel and batteries.
Made of durable polypropylene, WirthCo's Drip Tray is resistant to chemicals making it excellent for containing spills and drips from machinery, vehicles and drums. This tray holds up to 2 U.S. gallons of overflow liquid, whichis then capable of being disposed of or poured off.When this Drip Tray is filled with 2 gallons, the fluid comes up to approximately 1/2" from the upper lip or edge.
Battery Doctor's 1.8 Watt Maintainer Panel Kit features a durable plastic frame and an Amp Rating of up to 150 mA! This portable trickle charger/maintainer is ideal for maintaining the battery in your car, boat, RV or motor bike while it’s in storage, or away from your vehicle for any period of time.This kit is not recommended for exposure to severe outdoor weather elements. A male output adapter (cigarette lighter adapter), alligator clips, and mounting hardware (suction cups) are all included with this 16" L x 5" W x 1" D solar panel kit.
The Battery Doc 2/4/8 Amp 12 Volt Smart Charger/Maintainer is a 7-step charging program: Refresh, Soft Start, Bulk Charge, Absorption, Equalizing, Analysis and Float. With refresh technology, it breaks down internal battery resistance resulting from sulfation or a heavily discharged battery.Its fully automatic smart charging technology has new electronic switching control technology. The thermal resistor automatically senses the internal temperature of the charger to avoid damages due to over-heating or high ambient temperature.Voltage surge protected and hort circuit protected, this charger/maintainer also has reverse hook-up polarity protection making it spark resistant. The LED indicates the selected charging rate (2, 4 or 8 amps).Epoxy coated circuit board helps resist humidity. This charger/mainainer also automatically detects defective batteries.
For application up to 48 volts DC, this mini master single battery disconnect switch can be in either a 2 or 4 position. It has a continuous rating of 300 amps, intermittent rating of 1000 amps/5 seconds, crank rating of 700 amps/10 seconds, and can be used with 1 or 2 batteries, dimensions 69mm x 69mm x 75mm high, surface or panel mount.
Charge and maintain batteries from 5 to 200 amp hours with Battery Doc Sport Battery Charger/Maintainer. It can be left on your battery indefinitely without concern of overcharge.This battery charger/maintainer is suitable for charging of wet-cell and fully sealed lead-acid, and gel-cell batteries, plus AGM and deep cycle. This 12 volt, 1.25 amp, 3 stage charger/maintainer is compact, measuring 4” W x 2-1/4” H x 1-1/2” D, and weighs only 6 oz.Kit includes a 1.25 amp charger with 6' output cable lead, a 6" AC input cable lead, a 3-color LED charge indicator, alligator clips with 12" connector, ring terminals with 12" connector and in-line 3 amp fuse, and a 12 volt accessory connector with 12" adapter for easy connection.
Funnel King's® red 4 Quart Drum Funnel with a black lockable lid fits all 2" drum bung holes. This lockable polyethylene funnel has a 4 quart capacity, height 8.5", length 9-1/8", spout OD is 2" and spout length is 3/4" approximately.
Excellent for marine or automotive use, this water-resistant master switch is rated 100 amps continuous and 1000 amps surge at 12 volts. Rated below 50 amps continuous and 500 amps surge at 24 volts.
Designed for heavy-duty applications including air conditioners and heater blower motors, this is a 12-gauge standard AGC fuse holder and uses standard AGC fuses. With an 8" wire loop for easy connection, it is rated 30 amps max. Fuse not included.
Easy to install on a negative battery post, the battery is disconnected by unscrewing the knob a few turns and reconnected by tightening the knob. The knob can be removed completely to deter theft. Its compact size fits most battery compartments. Includes a 15 amp fused bypass that maintains computer settings, radio, clock, etc., while battery is disconnected.
Funnel King's® Auto Stop™ funnel has two magnets that automatically stop flow and spilling when fluid rises! This 16 oz capacity polypropylene funnel has an easy pour-off spout and a filter screen.
Made for 1/4" x 7/8", 1", and 1-1/4" glass fuses, this universal in-line fuse holder is made for use with AG and AGC type fuses and accepts 12-18 gauge wire leads. "Snap-Lock" provides a strong positive union of fuse holder housing. Made from yellow nylon for high visibility and normal environments.Installation Instructions:* Strip insulation from wire* Insert wire into holder* Crimp molded in terminal* Repeat steps for other side of terminal body* Insert selected fuse* Snap the 2 housings together
This switch is recommended to mount on negative battery post to disconnect ground and battery and is easy to reach and operate. It has a 5/8" diameter post for receiving standard battery cable clamp.
This heavy duty graduated measuring container is chemically resistant, spark-proof, dent-proof, rust-proof and boil-proof. Featuring molded raised letter graduations in U.S., metric and imperial, this container is made of translucent materials to keep contents visible. With a big grip handle and sturdy non-tip base, this container is ideal for mixing chemicals, oil, gas and powders.