Northstar's NN58 is a 5' x 8' Utility/ATV Trailer with mesh decking and side rails. This trailer is great for a large single rider ATV and all your gear. The full-size rear ramp gate makes for a more universal trailer and easy drive-on-drive-off capability.
Northstar's Multistar 5'x8' ATV / Utility Trailer with rear ramp and solid decking and sides is a must for any outdoorsman. This multi-purpose trailer can be used to transport a variety of gear, including an ATV, camping gear, hunting gear or gardening equipment. It features a rear ramp gate, solid sides and a solid floor with 6 tie-down points. Spare-tire mount is located on the top of the tongue to accommodate a spare tire, jack stand and gas can rack. Multi-leaf springs. DOT-approved lighting.
Acme Product's Class III Ball Mount Combo Kit with 2" Ball features a 4" drop class III ball mount, and a 2" ball. Includes a 5/8" diameter hitch pin and clip. This kit fits 2" x 2" receivers.Sizes:2" = 2" Drop x 3/4" x 2" Ball Diameter (Rating: 6000 lbs GVW/ 600 lbs GTW))4" = 4" Drop x 2-3/4" x 2" Ball Diameter (Rating: 6000 lbs GVW / 600 lbs GTW)
Acme Product's Class III Ball Mount - 883 Series is rated up to 5,000 lbs GVW with a GTW of 500 lbs. It features a 2" x 2" solid steel shank, a 2" receiver opening, and a 1" diameter trailer ball hole. Another great trailer accessory from Acme Products.
Acme Product's 7" Hitch Extender extends the hitch pull-pin hole and prevents certain trailers from hitting the tow vehicle when making sharp turns while towing. It features a welded stress collar, and pre-drilled tube holes to accommodate most ball mount requirements. It is made out of steel and comes with a black powder coat finish.
Acme Product's 1-1/4" to 2" Hitch Adapter is ideal for mounting bicycle carriers, cargo carriers and other light duty receiver hitch accessories. It is 6" long and features a welded stress collar, and comes with pre-drilled tube holes and accommodates most ball mount requirements.
Acme Product's 5/8” diameter Hitch Pin with lock is a solid steel zinc plated hitch pin. This is a great addition to any trailer setup. Not only will this help make sure your trailer stays attached but it also doubles as a safety device when towing. It will help prevent theft when your trailer is not being towed. It has two keys included.
Acme Product's Receiver Tube with Collar has many great features. It has a 2" x 2" opening sized to accept all 2" x 2" ball mounts. It has a welded stress collar and may be bolted or welded to frame for custom fabrication installations and comes with 2 pre-drilled 5/8" diameter tube holes that will accommodate most ball mount requirements. The tube has a black powder coat finish.
Acme Product's Tri-Ball Mount features three different size balls: 1-7/8", 2" and 2-5/16" chrome solid steel welded trailer balls. These are rated for a GVW of 2000 lb, 5000 lb, and 7500 lb respectively. It also has a tubular steel shank that has an overall length of 9-1/4" and a black powder coat finish. It fits 2" x 2" receivers, and has a 5/8" diameter hitch pin hole. A great addition to any towing rig that will add a lot of flexibility to any rig.Ball Capacity:1-7/8" = GVW 2000 lb2" = GVW 5000 lb2-5/16" = GVW 7500 lb
Acme Product's Class III Ball Mount - 783 Series is rated to 6,000 lbs GVW. It features a 2" x 2" tubular steel shank, a 2" receiver opening and a 1" diameter trailer ball hole. Another great item for your trailer from Acme Products.Sizes:2" = 2" Drop x 3/4" Rise x 9-3/16" Length (GVW: 6000 lbs GVW / 600 lbs GTW)4" = 4" Drop x 2-3/4" Rise x 10" Length (GVW: 6000 lbs GVW / 600 lbs GTW)
Acme Product's Class I Coupler is a 3" channel coupler that accepts a 1-7/8" trailer ball. It is rated to 2,000 lbs and is a straight channel design. The coupler comes with a locking lever action with a hole for a coupler lock. Features a quick lock, quick disconnect trigger handle and has pre-drilled mounting holes to make installation that much easier. The coupler is a bolt on / weld on design. It comes with a durable rust and corrosion resistant zinc finish.
Acme Product's Class III Ball Mount - 773 Series is rated to 6000 lb GVW. It features a 2" x 2" tubular steel shank, a 2" receiver opening and a 1" diameter trailer ball hole. A great item to have on hand when pulling your trailer from point A to point B.Sizes:2" = 2" Drop x 3/4" Rise x 9-3/16" Length (GVW: 6000 lbs GVW / 600 lbs GTW)4" = 4" Drop x 2-3/4" Rise x 10" Length (GVW: 6000 lbs GVW / 600 lbs GTW)6" = 6" Drop x 4-3/4" Rise x 11-1/8" Length (GVW: 6000 lbs GVW / 600 lbs GTW)
Acme Product's Coupler Lock is a great safety device that is necessary for any trailer. It has a solid cast design and is heat treated for durability. This coupler lock fits most couplers including Quick-Lock, Fas-Lok and Saf-Lok designs. It is a must have for when you are towing and need help to deter theft while your trailer is parked. Comes with 2 keys included.
Quickie's 24 inch multi-surface pushbroom is made with rugged, specialize material designed for indoor and outdoor DIY projects. This multi-surface pushbroom is designed specifically with soft outer fibers and stiff inner fibers to sweep a wide range of debris. Great of use in garages, basements and on sidewalks for sand, mulch, grass clipping and drywall debris. The broom head is set in a heavy duty resin block with diamond plate design that won't warp, rot or crack under normal usage. This broom comes with a built in scraper, perfect for removing dried spackle or caked on debris plus our patented Tight Grip bracket which prevents loose handles and improves durability This broom comes complete with clips attached to the block which can be used to store the broom unassembled. You can also easily remove the clips with pliers if desired.
Acme Product's Class III A-Frame coupler accepts a 2" diameter ball and has a 5,000 lbs. capacity. The coupler features a quick lock, quick disconnect trigger handle and comes with pre-drilled mounting holes for a trailer jack. The coupler is a weld on design and has a durable rust and corrosion resistant paint finish.
Acme Product's Class III Ball Mount Combo Kit with 1-7/8" Ball is rated up to 5000 lbs. The kit fits 2" x 2" receivers, and comes with a 5/8" diameter hitch pin and clip.Sizes:2" = 2" Drop x 3/4" Rise x 1-7/8" Ball Diameter (Rating: 5000 lbs GVW / 500 lbs GTW)4" = 4" Drop x 2-3/4" Rise 1-7/8" Ball Diameter (Rating: 5000 lbs GVW / 500 lbs GTW)
Acme Product's Class V Heavy Duty Ball Mount - 743 Series are rated to 12,000 lbs and are a great addition to your trailer setup. Features a 90 degree platform bend and is made from solid steel.Sizes:3-1/2" = 3-1/2" Drop x 2" Rise x 10-1/2" Length (GVW: 12000 lbs)5" = 5" Drop x 3-1/2" Rise x 10-1/2" Length (GVW: 12000 lbs)
Acme Product's 2" Chrome Shank Style Trailer Balls has a towing capacity of 3,500, 5,000, or 7500 lbs respectively. The ball has a 2" diameter, made from a solid steel bar and cold forged with a chrome finish and is a great addition to any towing rig.Sizes:3/4"= 2” Ball x 3/4” Shank Dia x 2-5/16” Shank L (GVW: 3500 lbs – Class II)1"= 2” Ball x 1” Shank Dia x 2-1/8” Shank L (GVW: 5000 lbs – Class III)1-1/4"= 2” Ball x 1-1/4” Shank Dia x 2-1/4” Shank L (GVW: 7500 lbs – Class IV)
Acme Product's Class V Ball Mount - 763 Series is rated to 12,000 lbs. and made from solid steel. It features a 1-1/4" diameter trailer ball hole.Sizes:2" = 2" Drop x 1" Rise x 8-1/2" Length (GVW: 12000 lbs)4" = 4" Drop x 3" Rise x 9-1/4" Length (GVW: 12000 lbs)6" = 6" Drop x 5" Rise x 10-1/4" Length (GVW: 12000 lbs)
Permatex Black Silcone Adhesive Sealant is a low odor formula, black RTV indoor/outdoor sealant, for general-purpose use. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -75°F to 450°F (-59°C to 232°C); resists water, weather, and vibration.