DEWALT's Threaded Rod Cutter (DCS350) is capable of quickly and cleanly cutting a range of threaded rod sizes including 1/4", 3/8" and 1/2" mild steel coarse thread rods and ¼”and 3/8” stainless steel coarse thread rods. The four sided, rotatable, cutting die allows you to cut the three different sizes of threaded rod with the same tool just by rotating the cutting dies to the size you want to cut. The unit doesn't create chips or sparks while cutting, providing a burr-free cut to easily thread on fasteners without having to clean the threads. The Threaded Rod Cutter is part of the DEWALT Perform & Protect line of power tools, which is designed to provide a high level of one or more of the following: control, dust containment, or low vibration, without sacrificing performance. The Threaded Rod Cutter increases control by eliminating fast moving cutting blades or wheels which can bind up when cutting or trimming threaded rod. The speed of the tool allows for efficiencies and achieves up to 350 3/8" cuts on one battery charge. The unit includes a bright LED work light, a forward/reverse/lock off switch, and a hang hook.
DEWALT's 20V MAX XR 1/2" Mid-Range Cordless Impact Wrench with Detent Pin Anvil delivers up to 330 ft/lbs max of fastening torque and a lightweight, ergonomic design. This tool also features Precision Wrench Control which helps prevent overtightening in forward and fastener run-off in reverse. This Mid-Range Cordless Impact Wrench is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting, and many other applications where a lot of torque is needed in a compact space.
This DEWALT small angle grinder features a brushless motor for an extended motor life and no need to change out old brushes. The grinder’s wheel stops within 2 seconds or less. And, its Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback, and will shut off for further protection.
DEWALT's 20V MAX Cordless Tripod Light illuminates your workspace in the toughest jobsite conditions. It's built for incredible durability in use, storage, or transport. Eliminate the hazardous heat of halogen. Cutting edge LED technology provides extended runtime and natural white light. Variable brightness settings up to 3000 lumens let you customize illumination for your work area. Compact design with carry handle provides easy portability, and it sets up in seconds. Rotating, pivoting head directs light where you need it. This package includes the light only.
This DEWALT brushless small angle grinder requires no time changing brushes, and offers a longer motor life. It offers a high level of protection and its break stops the wheel in 2 seconds or less. The Kickback Break engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback. The grinder will also shut off in those events to further protect the user.
This DEWALT small angle grinder has a brushless motor that elongates motor life and requires no time changing out worn brushes. The wheel stops within 2 seconds or less. Its Kickback Brake engages maximum force to stop the wheel when there is a pinch, stall, or bind-up to reduce kickback, and will shut off for further protection.
DEWALT's 60V MAX 7-1/4" Cordless Worm Drive Style Saw features a blade oriented to the left of the motor and the handle positioned at the rear of the saw to optimize line of sight when cutting. An electronic brake helps stop the blade after the trigger is released. Bevel capacity is 53° with stops at 45° and 22.5°. The saw achieves smooth, accurate cuts and long runtime with a durable, high-grade magnesium shoe and an efficient brushless motor.This Cordless Worm Drive Style Saw achieves 2-7/16 in. depth of cut at 90°. Hang the tool conveniently with the included rafter hook. It's ideal for use in a variety of wood cutting applications such as oriented strand board (OSB), plywood, hardwoods, dimensional lumber, and flooring. Many of the professional contractors using this tool include framers, concrete formers, carpenters, and general contractors.
This DEWALT fan offers the options you need on the jobsite. Add it to your 20V MAX* system of tools, or run it by a cord. You can stand it up, hang it, or mount it where you need so it’s not in the way. Plus, it offers variable speed control so you can set the power you want.
DEWALT's 60V MAX 7-1/4 in. Cordless Worm Drive Style Saw with 9.0 Ah battery offers big runtime. The blade is oriented to the left of the motor and the handle is at the rear to optimize line of sight when cutting. An electronic brake helps stop the blade after the trigger is released. Bevel capacity is 53° with stops at 45° and 22.5°. The saw makes smooth, accurate cuts and delivers long runtime with a durable, high-grade magnesium shoe and an efficient brushless motor.This Cordless Worm Drive Style Saw cuts to a depth of 2-7/16 in. at 90°. The included rafter hook makes it convenient to hang the tool on the jobsite. It's ideal for wood cutting applications such as oriented strand board (OSB), plywood, hardwoods, dimensional lumber, and flooring. Professional framers, concrete formers, carpenters, and general contractors can boost their productivity with this tool.
Featuring maximum durability and no-slip starting, the DEWALT Black Oxide Drill Bit Set is equipped with 13 commonly used bits designed to power through a range of applications. Crafted from heavy-duty black oxide, each bit features a 135-degree split point to helps to reduce walking. A rugged container keeps bits organized and ready to use.
This DEWALT DWS709 12” slide compound miter saw is a powerful machine in a compact, lightweight design that allows for easy transport and storage. This miter saw features a powerful 15 amp, 3,800 rpm motor that provides the power you need to get the task at hand done. The back fence design cuts up to 2x14 lumber at 90 degree angle and a 2x10 at 45 degrees. Dual horizontal steel rails have linear ball bearings that deliver an accurate, durable and compact saw. Bottom line: this saw was designed to get the job done easily and efficiently and makes a great addition to any workshop.
The DEWALT DWS779 slide compound miter saw is ideal for most cutting applications including crown molding up to 7-1/2 in. This miter saw is designed with a powerful 15 Amp, 3800 RPM motor that delivers extended power and durability. The exclusive back fence design cuts up to 2 x 14 dimensional lumbers at 90 Degree and 2 x 12 at 45 Degree.* Delivers ample power with 15 amp motor and 3800 RPM* Cuts 2x14 dimensional lumber at 90 degrees and 2x12 at 45 degrees* Dual horizontal steel rails with innovative clamping mechanism and linear ball bearings deliver an accurate, durable and compact saw* Tall sliding fences support crown molding up to 7-1/2 in. nested and base molding up to 6-3/4 in. vertically against the fence while easily sliding out of the way for bevel cuts* Adjustable stainless steel miter detent plate with 10 positive stops improves productivity and ensures cutting accuracy* Miters 60 degree to the right and 50 degree to the left providing increased capacity* Precise miter system and machined base fence support optimize durability and cutting accuracy* Compact, lightweight design (56 lbs.) allows for easy transport and storage* Cam lock miter handle with detent override delivers quick and accurate miter angles
Get Choppin’! Here’s a tool that’ll you’ll only have to buy once: The D28715 14” Chop Saw. Ranchers, welders, fabricators and machinists agree: DEWALT is the brand to have in your shop. It features an industrial grade 15 amp, 5.5 HP motor and can handle up to 5” dia. round material and 4 ½” x 6” rectangular material held securely in its Quick-Lock vise. Or you can set up for angle cuts with DEWALT’s exclusive, tool-free, Quick-Fence system. Swapping out blades is a snap on this beauty as it comes with DEWALT’s Quick-Change™ Blade Changing System as well, leading to more efficiency and no hunting for wrenches. Its heavy-duty compression springs mean smoother operation and substantially longer wear, as compared to traditional coil springs. You’ll feel the difference the first time you use it and you’ll wonder what took you so long to pick one up. Mount it securely to your work bench or transport it easily to the jobsite and get to work Chop-Chop!* Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability.* QUIK-CHANGE™ Blade Change System increases productivity by providing the user the ability to change wheels without a wrench.* Exclusive QUIK-FENCE™ tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a wrench.* Quick-Lock Vise allows for fast clamping on different size materials to increase productivity.* Soft start extends gear and motor life by reducing start up torque.* Ergonomically designed "D" handle provides a more comfortable hand position, reducing fatigue and increasing productivity.* Extra wide solid steel base provides increased stability when cutting longer material. The four pre-drilled holes in the base allow easy bolt down to any work bench.* The solid steel base also allows user to weld jigs or stops directly to the base.* Heavy-duty lock down pin allows head of the saw to be locked in the carrying position without the use of a chain.* Heavy-duty compression spring provides smooth movement and greater durability than torsion springs.* Spindle Lock allows user to make wheel changes quickly and easily, saving time and money.
The DEWALT DCK283D2 20V MAX* XR Lithium Ion Brushless Compact Drill / Driver and Impact Driver Combo Kit has a powerful motor to deliver maximum runtime. Features a lightweight, compact design to fit in tight spaces. 3-mode LED light gives users visibility in dark spaces.* DEWALT brushless motor delivers up to 57% more run-time over brushed* XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs* DCD791 20V MAX* 1/2" drill/driver has a compact (6.9" front to back) and lightweight (3.4 lb) design to fit into tight areas* DCF887 20V MAX* 1/4" impact driver has a compact (5.3" front to back) design to fit into tight areas* DCD791 features 3-mode LED with 20-minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces* DCF887 features 3 LED lights imbedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
Serious about wood? So is the DW735X, the total performance Thickness Planer from DEWALT. It’s built for the professional woodworker who needs the ability to plane larger pieces cleaner, faster, and truer. The powerful 15.0 Amp Motor turns 20,000 RPM, equating to 10,000 RPM at the Cutter-Head, while the Two-Speed options let you choose between 96 and 179 cuts-per-minute according to your project and wood type, for optimal performance and finish results. The integrated chip-ejection vacuum sucks chips and dust away from the knives and out of the machine, to ensure the cleanest cuts on every cycle. You can also achieve complete consistency with the DW735X’s material removal gauge and extra-large thickness scale, which is crucial when it comes to large runs and multiple pieces. Do you like serious savings too? How about customer satisfaction? Well, you came to the right place: Murdoch’s delivers the deals, the goods, and brings customer service right to your door* Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease.* Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier.* Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.* Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.* 19-3/4" cast aluminum base is 2X more rigid than a standard 10" base and folding tables.* Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user.* Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass.* Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease.* Includes infeed and outfeed tables and an extra set of knives.
The DCK694P2 20V MAX* XR 6-Tool Combo Kit features DEWALT's DCD996 Premium Hammerdrill/Driver with 3-speed transmission and their DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR Circular Saw features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX* XR compact Reciprocating saw features a compact and lightweight design to make your jobs easier. The DCS355 20V MAX* XR Oscillating Multi-Tool has a powerful brushless motor providing up to 75% more run time over a similar brushed tool. The DCL040 is a bright flashlight that illuminates your work area with LED output of 110 lumens.
Eliminate your downtime with DEWALT's DCD777C2 20V MAX* Compact Brushless Drill / Driver Kit. With a brushless motor that delivers more run time over other brushed models ,two 20V MAX lithium-ion battery packs, and a charger, you'll be able to enjoy the convenience of wireless operation without the downtime. It has a compact (7.52" front to back) lightweight design that will keep fatigue to a minimum. It also features a metal 1/2" ratcheting chuck for superior bit gripping strength and a bright LED light to provide lighting in dark or confined spaces.
Packed for everything a workshop needs, this 20V MAX Compact 9-piece Combo Kit DCK940D2 is a complete set of hardworking tools. This set contains: a DCD771 Compact ½” Drill, DCS381 20V Max reciprocating saw, DCF885 20V MAX 1/4" impact driver, DCS393 20V Max circular saw, DCL040 20V MAX LED work light, DCS355 20V MAX XR Oscillating Multi-Tool, DCR006 12V/20V MAX Cordless Lithium-Ion Bluetooth Speaker, DCG412B Cordless 20V Cut Off Grinder, DCD740 20V MAX lithium ion 3/8-inch right angle drill/driver, and a (2) 20V Max lithium ion 2.0 Ah battery packs and fast charger. There is no project too large or small for this handy kit to tackle.
Invest in a wet-dry shop-vac that shines in a variety of situations with the DEWALT DCV581H 18/20V MAX Cordless/Corded Wet-Dry Vacuum. It functions either connected by cord to an AC outlet or cordlessly with either an 18V or 20V MAX battery (not included). This vacuum's convenience doesn't come at the cost of performance, though. The filter is HEPA rated to 99.97% efficiency, it cleans easily with water, and the 2-gallon tank capacity is enough for bigger jobs like emptying a toilet or a clogged pipe. Whether you're keeping it in the shop or taking it on the go, DEWALT's DCV581H delivers the performance you need.
Powerful enough to tackle your projects, the DW745 10” Compact Job Site Table Saw with Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components for a custom fit for every job. The 15 amp motor quickly rips through hardwoods with ease. Rack and pinion fence rails make fence adjustments fast, smooth and accurate, while telescoping fence rails retract to create a small, portable package. A 16" of rip easily cuts a variety of larger shelving and trim materials, and metal roll cage base offers greater durability than plastic bases. Blades can be adjusted 0 - 45 degrees for bevel applications while the adjustable rear feet are designed to level the saw on uneven work surfaces. The dust port allows for 2-1/2" vacuum hook up and minimizes clean up. A 24T carbide blade enhances cut quality and prolongs blade life, while a table coating reduces friction for smoother cutting.
The DCK594P2 20V MAX* XR Lithium Ion 5-Tool Combo Kit features DEWALT's DCD996 Premium Hammerdrill/Driver with 3-speed transmission and their DEWALT-built high power, high efficiency brushless motor delivering up to 75% more runtime vs. 18v NiCad brushed motors. The DCF887 20V MAX* XR Brushless 1/4" 3-Speed Impact Driver is compact for fitting in tight spaces. Three LED lights make it ideal for working in the dark. The DCS570 20V MAX* XR Circular Saw, features a brushless motor which provides 5200 RPM maintaining speed under load. The DCS367 20V MAX* XR Compact Reciprocating Saw features a compact and lightweight design to help make your jobs easier. The DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.
20V Band Saw DCS371B* 2-1/2? Cut Capacity* Centered handle that allows for users to operate tool in any orientation, including overhead* Ergonomic and balanced design* Weighs 9.4lbs (with battery)* 15? long* 14/18 tpi blade* 32-7/8? blade length* 570 fpm cutting speed* Tool-free blade changing lever* Dual bearing blade guide rollers* Built-in hook allows the saw to be hung from ladders, carts, and other types of equipment* Built-in LED work light with 20 second delay
An essential tool for home craftsmen and woodworking enthusiasts, this DEWALT table saw with rolling stand may be used for both wide and narrow rip cuts, making it great for working on cabinets, floors, decks, and trim, to name just a few applications. The rack and pinion telescoping fence system lets you make fast, accurate adjustments, and the 15 AMP motor effortlessly rips through hardwoods.The on-board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick, and cord wrap when not in use. Keep clean-up easy with the dust collection port that connects to any standard vacuum.